From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Add initial SoC DTSI for Renesas RZ/N2H ("R9A09G087") SoC, below are
the list of blocks added:
- EXT CLKs
- 4X CA55
- SCIF
- CPG
- GIC
- ARMv8 Timer
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v1->v2:
- Reordered the `l3_ca55` node and renamed it to `L3_CA55` for consistency
- Added reviewed-by tag from Geert
---
arch/arm64/boot/dts/renesas/r9a09g087.dtsi | 124 +++++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r9a09g087.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
new file mode 100644
index 000000000000..e57a91adcb68
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r9a09g087";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-level = <3>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ sci0: serial@80005000 {
+ compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+ reg = <0 0x80005000 0 0x400>;
+ interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+ clock-names = "operation", "bus";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@80280000 {
+ compatible = "renesas,r9a09g087-cpg-mssr";
+ reg = <0 0x80280000 0 0x1000>,
+ <0 0x81280000 0 0x9000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ gic: interrupt-controller@83000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x83000000 0 0x40000>,
+ <0x0 0x83040000 0 0x160000>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ };
+};
--
2.49.0
