From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
The USB20/21_OVRCUR pins on the RZ/V2H EVK has an external pull-up resistor
on the board. Therefore, the internal pull-up configuration via the
`bias-pull-up` property is redundant and should be removed.
Fixes: 7548897ad4ae3 ("arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2.0 support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index 36e9f39cd4e4..9819f691c7d4 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -658,7 +658,6 @@ sd1_cd {
usb20_pins: usb20 {
ovc {
pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
- bias-pull-up;
};
vbus {
@@ -669,7 +668,6 @@ vbus {
usb21_pins: usb21 {
ovc {
pinmux = <RZV2H_PORT_PINMUX(6, 7, 14)>; /* OVC */
- bias-pull-up;
};
vbus {
--
2.49.0
