There is no need to have debug code to print the bittiming values, as
the user can get all values through the netlink interface.
Suggested-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- New.
---
drivers/net/can/rcar/rcar_canfd.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 2174c9667cabce54..b353168f75f28565 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1458,8 +1458,6 @@ static void rcar_canfd_set_bittiming(struct net_device *ndev)
RCANFD_NCFG_NSJW(gpriv, sjw) | RCANFD_NCFG_NTSEG2(gpriv, tseg2));
rcar_canfd_write(priv->base, RCANFD_CCFG(ch), cfg);
- netdev_dbg(priv->ndev, "nrate: brp %u, sjw %u, tseg1 %u, tseg2 %u\n",
- brp, sjw, tseg1, tseg2);
/* Data bit timing settings */
brp = dbt->brp - 1;
@@ -1471,8 +1469,6 @@ static void rcar_canfd_set_bittiming(struct net_device *ndev)
RCANFD_DCFG_DSJW(gpriv, sjw) | RCANFD_DCFG_DTSEG2(gpriv, tseg2));
rcar_canfd_write(priv->base, RCANFD_F_DCFG(gpriv, ch), cfg);
- netdev_dbg(priv->ndev, "drate: brp %u, sjw %u, tseg1 %u, tseg2 %u\n",
- brp, sjw, tseg1, tseg2);
} else {
/* Classical CAN only mode */
if (gpriv->info->shared_can_regs) {
@@ -1488,9 +1484,6 @@ static void rcar_canfd_set_bittiming(struct net_device *ndev)
}
rcar_canfd_write(priv->base, RCANFD_CCFG(ch), cfg);
- netdev_dbg(priv->ndev,
- "rate: brp %u, sjw %u, tseg1 %u, tseg2 %u\n",
- brp, sjw, tseg1, tseg2);
}
}
--
2.43.0
