Hi Tomi,
Thanks for your patch.
On 2025-05-30 16:50:35 +0300, Tomi Valkeinen wrote:
> Instead of taking the bpp and the number of lanes as parameters to
> rcsi2_calc_mbps(), change the function to get those parameters inside
> the function. This centralizes the code a bit and makes it easier to add
> streams support.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> drivers/media/platform/renesas/rcar-csi2.c | 45 ++++++++++++++++--------------
> 1 file changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index 8aca35096408..90973f3cba38 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -998,13 +998,18 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
> return 0;
> }
>
> -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
> - unsigned int lanes)
> +static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> + struct v4l2_subdev_state *state)
> {
> + const struct rcar_csi2_format *format;
> + struct v4l2_mbus_framefmt *fmt;
> struct media_pad *remote_pad;
> struct v4l2_subdev *source;
> + unsigned int lanes;
> + unsigned int bpp;
> s64 freq;
> u64 mbps;
> + int ret;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1012,6 +1017,20 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
> source = priv->remote;
> remote_pad = &source->entity.pads[priv->remote_pad];
>
> + ret = rcsi2_get_active_lanes(priv, &lanes);
> + if (ret)
> + return ret;
> +
> + fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> + if (!fmt)
> + return -EINVAL;
> +
> + format = rcsi2_code_to_fmt(fmt->code);
> + if (!format)
> + return -EINVAL;
> +
> + bpp = format->bpp;
> +
> freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
> if (freq < 0) {
> int ret = (int)freq;
> @@ -1092,7 +1111,7 @@ static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
> phycnt = PHYCNT_ENABLECLK;
> phycnt |= (1 << lanes) - 1;
>
> - mbps = rcsi2_calc_mbps(priv, format->bpp, lanes);
> + mbps = rcsi2_calc_mbps(priv, state);
> if (mbps < 0)
> return mbps;
>
> @@ -1300,23 +1319,15 @@ static int rcsi2_c_phy_setting_v4h(struct rcar_csi2 *priv, int msps)
> static int rcsi2_start_receiver_v4h(struct rcar_csi2 *priv,
> struct v4l2_subdev_state *state)
> {
> - const struct rcar_csi2_format *format;
> - const struct v4l2_mbus_framefmt *fmt;
> unsigned int lanes;
> int msps;
> int ret;
>
> - /* Use the format on the sink pad to compute the receiver config. */
> - fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> - format = rcsi2_code_to_fmt(fmt->code);
> - if (!format)
> - return -EINVAL;
> -
> ret = rcsi2_get_active_lanes(priv, &lanes);
> if (ret)
> return ret;
>
> - msps = rcsi2_calc_mbps(priv, format->bpp, lanes);
> + msps = rcsi2_calc_mbps(priv, state);
> if (msps < 0)
> return msps;
>
> @@ -1494,23 +1505,15 @@ static int rcsi2_init_common_v4m(struct rcar_csi2 *priv, unsigned int mbps)
> static int rcsi2_start_receiver_v4m(struct rcar_csi2 *priv,
> struct v4l2_subdev_state *state)
> {
> - const struct rcar_csi2_format *format;
> - const struct v4l2_mbus_framefmt *fmt;
> unsigned int lanes;
> int mbps;
> int ret;
>
> - /* Calculate parameters */
> - fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> - format = rcsi2_code_to_fmt(fmt->code);
> - if (!format)
> - return -EINVAL;
> -
> ret = rcsi2_get_active_lanes(priv, &lanes);
> if (ret)
> return ret;
>
> - mbps = rcsi2_calc_mbps(priv, format->bpp, lanes);
> + mbps = rcsi2_calc_mbps(priv, state);
> if (mbps < 0)
> return mbps;
>
>
> --
> 2.43.0
>
--
Kind Regards,
Niklas Söderlund
