On Wed, 13 Aug 2025 13:46:57 -0500, Alex Elder wrote: > Add the Device Tree binding for the PCIe root complex found on the > SpacemiT K1 SoC. This device is derived from the Synopsys Designware > PCIe IP. It supports up to three PCIe ports operating at PCIe gen 2 > link speeds (5 GT/sec). One of the ports uses a combo PHY, which is > typically used to support a USB 3 port. > > Signed-off-by: Alex Elder <elder@xxxxxxxxxxxx> > --- > .../bindings/pci/spacemit,k1-pcie-rc.yaml | 141 ++++++++++++++++++ > 1 file changed, 141 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.example.dtb: /example-0/pcie@ca000000: failed to match any schema with compatible: ['spacemit,k1-pcie-rc'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250813184701.2444372-4-elder@xxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
