Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS. Suggested-by: Bjorn Helgaas <helgaas@xxxxxxxxxx> Signed-off-by: Niklas Cassel <cassel@xxxxxxxxxx> --- drivers/pci/controller/plda/pcie-starfive.c | 2 +- drivers/pci/pci.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c index e73c1b7bc8ef..3caf53c6c082 100644 --- a/drivers/pci/controller/plda/pcie-starfive.c +++ b/drivers/pci/controller/plda/pcie-starfive.c @@ -368,7 +368,7 @@ static int starfive_pcie_host_init(struct plda_pcie_rp *plda) * of 100ms following exit from a conventional reset before * sending a configuration request to the device. */ - msleep(PCIE_RESET_CONFIG_DEVICE_WAIT_MS); + msleep(PCIE_RESET_CONFIG_WAIT_MS); if (starfive_pcie_host_wait_for_link(pcie)) dev_info(dev, "port link down\n"); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 12215ee72afb..98d6fccb383e 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -61,7 +61,7 @@ struct pcie_tlp_log; * completes before sending a Configuration Request to the device * immediately below that Port." */ -#define PCIE_RESET_CONFIG_DEVICE_WAIT_MS 100 +#define PCIE_RESET_CONFIG_WAIT_MS 100 /* Message Routing (r[2:0]); PCIe r6.0, sec 2.2.8 */ #define PCIE_MSG_TYPE_R_RC 0 -- 2.49.0
