Re: [PATCH v9 05/16] CXL/PCI: Introduce CXL uncorrectable protocol error recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 3 Jun 2025 12:22:28 -0500
Terry Bowman <terry.bowman@xxxxxxx> wrote:

> Create cxl_do_recovery() to provide uncorrectable protocol error (UCE)
> handling. Follow similar design as found in PCIe error driver,
> pcie_do_recovery(). One difference is cxl_do_recovery() will treat all UCEs
> as fatal with a kernel panic. This is to prevent corruption on CXL memory.
> 
> Copy the PCI error driver's merge_result() and rename as cxl_merge_result().
> Introduce PCI_ERS_RESULT_PANIC and add support in the cxl_merge_result()
> routine.

Do we need a separate version?  PCI won't ever set PCI_ERS_RESULT_PANIC
so new != PCI_ERS_RESULT_PANIC and the first condition would only do
something on CXL.

> 
> Copy pci_walk_bridge() to cxl_walk_bridge(). Make a change to walk the
> first device in all cases.
> 
> Copy the PCI error driver's report_error_detected() to cxl_report_error_detected().
> Note, only CXL Endpoints are currently supported. Add locking for PCI
> device as done in PCI's report_error_detected(). Add reference counting for
> the CXL device responsible for cleanup of the CXL RAS. This is necessary
> to prevent the RAS registers from disappearing before logging is completed.
> 
> Call panic() to halt the system in the case of uncorrectable errors (UCE)
> in cxl_do_recovery(). Export pci_aer_clear_fatal_status() for CXL to use
> if a UCE is not found. In this case the AER status must be cleared and
> uses pci_aer_clear_fatal_status().
> 
> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
> ---
>  drivers/cxl/core/ras.c | 79 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/pci.h    |  3 ++
>  2 files changed, 82 insertions(+)
> 
> diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
> index 9ed5c682e128..715f7221ea3a 100644
> --- a/drivers/cxl/core/ras.c
> +++ b/drivers/cxl/core/ras.c
> @@ -110,8 +110,87 @@ static DECLARE_WORK(cxl_cper_prot_err_work, cxl_cper_prot_err_work_fn);
>  
>  #ifdef CONFIG_PCIEAER_CXL
>  
> +static pci_ers_result_t cxl_merge_result(enum pci_ers_result orig,
> +					 enum pci_ers_result new)
> +{
> +	if (new == PCI_ERS_RESULT_PANIC)
> +		return PCI_ERS_RESULT_PANIC;
> +
> +	if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
> +		return PCI_ERS_RESULT_NO_AER_DRIVER;
> +
> +	if (new == PCI_ERS_RESULT_NONE)
> +		return orig;
> +
> +	switch (orig) {
> +	case PCI_ERS_RESULT_CAN_RECOVER:
> +	case PCI_ERS_RESULT_RECOVERED:
> +		orig = new;
> +		break;
> +	case PCI_ERS_RESULT_DISCONNECT:
> +		if (new == PCI_ERS_RESULT_NEED_RESET)
> +			orig = PCI_ERS_RESULT_NEED_RESET;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return orig;
> +}
> +
> +static int cxl_report_error_detected(struct pci_dev *pdev, void *data)
> +{
> +	pci_ers_result_t vote, *result = data;
> +	struct cxl_dev_state *cxlds;
> +
> +	if ((pci_pcie_type(pdev) != PCI_EXP_TYPE_ENDPOINT) &&
> +	    (pci_pcie_type(pdev) != PCI_EXP_TYPE_RC_END))
> +		return 0;
> +
> +	cxlds = pci_get_drvdata(pdev);
> +	struct device *dev __free(put_device) = get_device(&cxlds->cxlmd->dev);
> +
> +	device_lock(&pdev->dev);
> +	vote = cxl_error_detected(pdev, pci_channel_io_frozen);
> +	*result = cxl_merge_result(*result, vote);
> +	device_unlock(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static void cxl_walk_bridge(struct pci_dev *bridge,
> +			    int (*cb)(struct pci_dev *, void *),
> +			    void *userdata)
> +{
> +	if (cb(bridge, userdata))
> +		return;
> +
> +	if (bridge->subordinate)
> +		pci_walk_bus(bridge->subordinate, cb, userdata);
> +}
> +
>  static void cxl_do_recovery(struct pci_dev *pdev)
>  {
> +	struct pci_host_bridge *host = pci_find_host_bridge(pdev->bus);
> +	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
> +
> +	cxl_walk_bridge(pdev, cxl_report_error_detected, &status);
> +	if (status == PCI_ERS_RESULT_PANIC)
> +		panic("CXL cachemem error.");
> +
> +	/*
> +	 * If we have native control of AER, clear error status in the device
> +	 * that detected the error.  If the platform retained control of AER,
> +	 * it is responsible for clearing this status.  In that case, the
> +	 * signaling device may not even be visible to the OS.
> +	 */
> +	if (host->native_aer) {
> +		pcie_clear_device_status(pdev);
> +		pci_aer_clear_nonfatal_status(pdev);
> +		pci_aer_clear_fatal_status(pdev);
> +	}
> +
> +	pci_info(pdev, "CXL uncorrectable error.\n");
>  }
>  
>  static int cxl_rch_handle_error_iter(struct pci_dev *pdev, void *data)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index cd53715d53f3..b0e7545162de 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -870,6 +870,9 @@ enum pci_ers_result {
>  
>  	/* No AER capabilities registered for the driver */
>  	PCI_ERS_RESULT_NO_AER_DRIVER = (__force pci_ers_result_t) 6,
> +
> +	/* System is unstable, panic  */
> +	PCI_ERS_RESULT_PANIC = (__force pci_ers_result_t) 7,
>  };
>  
>  /* PCI bus error event callbacks */





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux