Move the phy, phy-names, wake-gpio's to the pcie root port node instead of the bridge node, as agreed upon in multiple places one instance is[1]. Update the qcom,pcie-common.yaml to include the phy, phy-names, and wake-gpios properties in the root port node. There is already reset-gpio defined for PERST# in pci-bus-common.yaml, start using that property instead of perst-gpio. For backward compatibility, do not remove any existing properties in the bridge node. [1] https://lore.kernel.org/linux-pci/20241211192014.GA3302752@bhelgaas/ Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx> --- .../devicetree/bindings/pci/qcom,pcie-common.yaml | 18 ++++++++++++++++++ .../devicetree/bindings/pci/qcom,pcie-sc7280.yaml | 17 +++++++++++++---- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index 0480c58f7d998adbac4c6de20cdaec945b3bab21..16e9acba1559b457da8a8a9dda4a22b226808f86 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -85,6 +85,24 @@ properties: opp-table: type: object +patternProperties: + "^pcie@": + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + + unevaluatedProperties: false + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index 76cb9fbfd476fb0412217c68bd8db44a51c7d236..beb092f53019c31861460570cd2142506e05d8ef 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -162,9 +162,6 @@ examples: iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; - phys = <&pcie1_phy>; - phy-names = "pciephy"; - pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>; @@ -173,7 +170,19 @@ examples: resets = <&gcc GCC_PCIE_1_BCR>; reset-names = "pci"; - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; + pcie1_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; + }; }; -- 2.34.1
