On Thu, Apr 10, 2025 at 10:31:57PM +0800, Zorro Lang wrote:
> On Wed, Apr 09, 2025 at 08:24:52AM -0700, Darrick J. Wong wrote:
> > On Wed, Apr 09, 2025 at 07:00:52AM +0000, Nirjhar Roy (IBM) wrote:
> > > Replace exit <return-val> with _exit <return-val> which
> > > is introduced in the previous patch.
> > >
> > > Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@xxxxxxxxx>
> > > Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@xxxxxxxxx>
> > > Reviewed-by: Dave Chinner <dchinner@xxxxxxxxxx>
> >
> > Not sure why _filter_hole_fiemap gets whitespace cleanups in this patch,
> > but I don't care to make Nirjhar rev the whole series just for
> > whitespace so
>
> Yeah, that doesn't make sense to this patch, but I don't mind merging that
> anyway. If you hope to revert that part, I can help too :)
Nah, just let it go in, it's not a major change.
--D
> Thanks,
> Zorro
>
> >
> > Reviewed-by: "Darrick J. Wong" <djwong@xxxxxxxxxx>
> >
> > --D
> >
> > > ---
> > > common/btrfs | 6 +--
> > > common/ceph | 2 +-
> > > common/config | 7 ++--
> > > common/dump | 11 +++--
> > > common/ext4 | 2 +-
> > > common/populate | 2 +-
> > > common/preamble | 2 +-
> > > common/punch | 13 +++---
> > > common/rc | 105 +++++++++++++++++++++++-------------------------
> > > common/repair | 4 +-
> > > common/xfs | 8 ++--
> > > 11 files changed, 78 insertions(+), 84 deletions(-)
> > >
> > > diff --git a/common/btrfs b/common/btrfs
> > > index a3b9c12f..3725632c 100644
> > > --- a/common/btrfs
> > > +++ b/common/btrfs
> > > @@ -80,7 +80,7 @@ _require_btrfs_mkfs_feature()
> > > {
> > > if [ -z $1 ]; then
> > > echo "Missing feature name argument for _require_btrfs_mkfs_feature"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > feat=$1
> > > $MKFS_BTRFS_PROG -O list-all 2>&1 | \
> > > @@ -104,7 +104,7 @@ _require_btrfs_fs_feature()
> > > {
> > > if [ -z $1 ]; then
> > > echo "Missing feature name argument for _require_btrfs_fs_feature"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > feat=$1
> > > modprobe btrfs > /dev/null 2>&1
> > > @@ -214,7 +214,7 @@ _check_btrfs_filesystem()
> > > if [ $ok -eq 0 ]; then
> > > status=1
> > > if [ "$iam" != "check" ]; then
> > > - exit 1
> > > + _exit 1
> > > fi
> > > return 1
> > > fi
> > > diff --git a/common/ceph b/common/ceph
> > > index d6f24df1..df7a6814 100644
> > > --- a/common/ceph
> > > +++ b/common/ceph
> > > @@ -14,7 +14,7 @@ _ceph_create_file_layout()
> > >
> > > if [ -e $fname ]; then
> > > echo "File $fname already exists."
> > > - exit 1
> > > + _exit 1
> > > fi
> > > touch $fname
> > > $SETFATTR_PROG -n ceph.file.layout \
> > > diff --git a/common/config b/common/config
> > > index 7dd78dbe..eada3971 100644
> > > --- a/common/config
> > > +++ b/common/config
> > > @@ -124,8 +124,7 @@ set_mkfs_prog_path_with_opts()
> > > _fatal()
> > > {
> > > echo "$*"
> > > - status=1
> > > - exit 1
> > > + _exit 1
> > > }
> > >
> > > export MKFS_PROG="$(type -P mkfs)"
> > > @@ -869,7 +868,7 @@ get_next_config() {
> > > echo "Warning: need to define parameters for host $HOST"
> > > echo " or set variables:"
> > > echo " $MC"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > _check_device TEST_DEV required $TEST_DEV
> > > @@ -880,7 +879,7 @@ get_next_config() {
> > > if [ ! -z "$SCRATCH_DEV_POOL" ]; then
> > > if [ ! -z "$SCRATCH_DEV" ]; then
> > > echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
> > > export SCRATCH_DEV
> > > diff --git a/common/dump b/common/dump
> > > index 6dcd6250..09859006 100644
> > > --- a/common/dump
> > > +++ b/common/dump
> > > @@ -280,8 +280,7 @@ _create_dumpdir_stress_num()
> > > rm -rf $dump_dir
> > > if ! mkdir $dump_dir; then
> > > echo " failed to mkdir $dump_dir"
> > > - status=1
> > > - exit
> > > + _exit 1
> > > fi
> > >
> > > # Remove fsstress commands that aren't supported on all xfs configs so that
> > > @@ -480,7 +479,7 @@ _do_create_dumpdir_fill()
> > > else
> > > $verbose && echo
> > > echo "Error: cannot mkdir \"$dir\""
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > else
> > > @@ -496,7 +495,7 @@ _do_create_dumpdir_fill()
> > > else
> > > $verbose && echo
> > > echo "Error: cannot mkdir \"$dir\""
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > fi
> > > @@ -507,7 +506,7 @@ _do_create_dumpdir_fill()
> > > else
> > > $verbose && echo
> > > echo "Error: cannot create \"$file\""
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > if [ -n "$owner" -a -n "$group" ]; then
> > > @@ -649,7 +648,7 @@ _do_create_dump_symlinks()
> > > else
> > > $verbose && echo
> > > echo "Error: cannot mkdir \"$dir\""
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > fi
> > > diff --git a/common/ext4 b/common/ext4
> > > index e1b336d3..f88fa532 100644
> > > --- a/common/ext4
> > > +++ b/common/ext4
> > > @@ -182,7 +182,7 @@ _require_scratch_ext4_feature()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _require_scratch_ext4_feature feature"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > $MKFS_EXT4_PROG -F $MKFS_OPTIONS -O "$1" \
> > > $SCRATCH_DEV 512m >/dev/null 2>&1 \
> > > diff --git a/common/populate b/common/populate
> > > index 7352f598..50dc75d3 100644
> > > --- a/common/populate
> > > +++ b/common/populate
> > > @@ -1003,7 +1003,7 @@ _fill_fs()
> > >
> > > if [ $# -ne 4 ]; then
> > > echo "Usage: _fill_fs filesize dir blocksize switch_user"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > if [ $switch_user -eq 0 ]; then
> > > diff --git a/common/preamble b/common/preamble
> > > index c92e55bb..ba029a34 100644
> > > --- a/common/preamble
> > > +++ b/common/preamble
> > > @@ -35,7 +35,7 @@ _begin_fstest()
> > > {
> > > if [ -n "$seq" ]; then
> > > echo "_begin_fstest can only be called once!"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > seq=`basename $0`
> > > diff --git a/common/punch b/common/punch
> > > index 43ccab69..64d665d8 100644
> > > --- a/common/punch
> > > +++ b/common/punch
> > > @@ -172,16 +172,16 @@ _filter_fiemap_flags()
> > > $AWK_PROG -e "$awk_script" | _coalesce_extents
> > > }
> > >
> > > -# Filters fiemap output to only print the
> > > +# Filters fiemap output to only print the
> > > # file offset column and whether or not
> > > # it is an extent or a hole
> > > _filter_hole_fiemap()
> > > {
> > > $AWK_PROG '
> > > $3 ~ /hole/ {
> > > - print $1, $2, $3;
> > > + print $1, $2, $3;
> > > next;
> > > - }
> > > + }
> > > $5 ~ /0x[[:xdigit:]]+/ {
> > > print $1, $2, "extent";
> > > }' |
> > > @@ -224,8 +224,7 @@ _filter_bmap()
> > >
> > > die_now()
> > > {
> > > - status=1
> > > - exit
> > > + _exit 1
> > > }
> > >
> > > # test the different corner cases for zeroing a range:
> > > @@ -276,7 +275,7 @@ _test_generic_punch()
> > > u) unwritten_tests=
> > > ;;
> > > ?) echo Invalid flag
> > > - exit 1
> > > + _exit 1
> > > ;;
> > > esac
> > > done
> > > @@ -552,7 +551,7 @@ _test_block_boundaries()
> > > d) sync_cmd=
> > > ;;
> > > ?) echo Invalid flag
> > > - exit 1
> > > + _exit 1
> > > ;;
> > > esac
> > > done
> > > diff --git a/common/rc b/common/rc
> > > index 038c22f6..3b21eb27 100644
> > > --- a/common/rc
> > > +++ b/common/rc
> > > @@ -909,8 +909,7 @@ _mkfs_dev()
> > > # output stored mkfs output
> > > cat $tmp.mkfserr >&2
> > > cat $tmp.mkfsstd
> > > - status=1
> > > - exit 1
> > > + _exit 1
> > > fi
> > > rm -f $tmp.mkfserr $tmp.mkfsstd
> > > }
> > > @@ -1575,7 +1574,7 @@ _get_pids_by_name()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _get_pids_by_name process-name" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > # Algorithm ... all ps(1) variants have a time of the form MM:SS or
> > > @@ -1609,7 +1608,7 @@ _df_device()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _df_device device" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > # Note that we use "==" here so awk doesn't try to interpret an NFS over
> > > @@ -1641,7 +1640,7 @@ _df_dir()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _df_dir device" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > $DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
> > > @@ -1667,7 +1666,7 @@ _used()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _used device" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > _df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
> > > @@ -1680,7 +1679,7 @@ _fs_type()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _fs_type device" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > #
> > > @@ -1705,7 +1704,7 @@ _fs_options()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _fs_options device" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > $AWK_PROG -v dev=$1 '
> > > @@ -1720,7 +1719,7 @@ _is_block_dev()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _is_block_dev dev" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > local dev=$1
> > > @@ -1739,7 +1738,7 @@ _is_char_dev()
> > > {
> > > if [ $# -ne 1 ]; then
> > > echo "Usage: _is_char_dev dev" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > local dev=$1
> > > @@ -1772,7 +1771,7 @@ _do()
> > > echo -n "$note... "
> > > else
> > > echo "Usage: _do [note] cmd" 1>&2
> > > - status=1; exit
> > > + _exit 1
> > > fi
> > >
> > > (eval "echo '---' \"$cmd\"") >>$seqres.full
> > > @@ -1793,7 +1792,7 @@ _do()
> > > then
> > > [ $# -ne 2 ] && echo
> > > eval "echo \"$cmd\" failed \(returned $ret\): see $seqres.full"
> > > - status=1; exit
> > > + _exit 1
> > > fi
> > >
> > > return $ret
> > > @@ -1809,8 +1808,7 @@ _notrun()
> > > rm -f ${RESULT_DIR}/require_test*
> > > rm -f ${RESULT_DIR}/require_scratch*
> > >
> > > - status=0
> > > - exit
> > > + _exit 0
> > > }
> > >
> > > # just plain bail out
> > > @@ -1819,8 +1817,7 @@ _fail()
> > > {
> > > echo "$*" | tee -a $seqres.full
> > > echo "(see $seqres.full for details)"
> > > - status=1
> > > - exit 1
> > > + _exit 1
> > > }
> > >
> > > #
> > > @@ -2049,14 +2046,14 @@ _require_scratch_nocheck()
> > >
> > > _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
> > > local err=$?
> > > - [ $err -le 1 ] || exit 1
> > > + [ $err -le 1 ] || _exit 1
> > > if [ $err -eq 0 ]
> > > then
> > > # if it's mounted, unmount it
> > > if ! _scratch_unmount
> > > then
> > > echo "failed to unmount $SCRATCH_DEV"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > rm -f ${RESULT_DIR}/require_scratch "$RESULT_DIR/.skip_orebuild" "$RESULT_DIR/.skip_rebuild"
> > > @@ -2273,13 +2270,13 @@ _require_test()
> > >
> > > _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR
> > > local err=$?
> > > - [ $err -le 1 ] || exit 1
> > > + [ $err -le 1 ] || _exit 1
> > > if [ $err -ne 0 ]
> > > then
> > > if ! _test_mount
> > > then
> > > echo "!!! failed to mount $TEST_DEV on $TEST_DIR"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > touch ${RESULT_DIR}/require_test
> > > @@ -2391,7 +2388,7 @@ _require_block_device()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _require_block_device <dev>" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > if [ "`_is_block_dev "$1"`" == "" ]; then
> > > _notrun "require $1 to be valid block disk"
> > > @@ -2404,7 +2401,7 @@ _require_local_device()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _require_local_device <dev>" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > if [ "`_is_block_dev "$1"`" != "" ]; then
> > > return 0
> > > @@ -2512,7 +2509,7 @@ _zone_type()
> > > local target=$1
> > > if [ -z $target ]; then
> > > echo "Usage: _zone_type <device>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local sdev=`_short_dev $target`
> > >
> > > @@ -2528,7 +2525,7 @@ _require_zoned_device()
> > > local target=$1
> > > if [ -z $target ]; then
> > > echo "Usage: _require_zoned_device <device>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > local type=`_zone_type ${target}`
> > > @@ -2668,7 +2665,7 @@ _run_aiodio()
> > > if [ -z "$1" ]
> > > then
> > > echo "usage: _run_aiodio command_name" 2>&1
> > > - status=1; exit 1
> > > + _exit 1
> > > fi
> > >
> > > _require_aiodio $1
> > > @@ -2880,7 +2877,7 @@ _require_xfs_io_command()
> > > if [ -z "$1" ]
> > > then
> > > echo "Usage: _require_xfs_io_command command [switch]" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local command=$1
> > > shift
> > > @@ -3364,7 +3361,7 @@ _is_dev_mounted()
> > >
> > > if [ $# -lt 1 ]; then
> > > echo "Usage: _is_dev_mounted <device> [fstype]" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
> > > @@ -3378,7 +3375,7 @@ _is_dir_mountpoint()
> > >
> > > if [ $# -lt 1 ]; then
> > > echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > findmnt -rncv -t $fstype -o TARGET $dir | head -1
> > > @@ -3391,7 +3388,7 @@ _remount()
> > > if [ $# -ne 2 ]
> > > then
> > > echo "Usage: _remount device ro/rw" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local device=$1
> > > local mode=$2
> > > @@ -3399,7 +3396,7 @@ _remount()
> > > if ! mount -o remount,$mode $device
> > > then
> > > echo "_remount: failed to remount filesystem on $device as $mode"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > }
> > >
> > > @@ -3417,7 +3414,7 @@ _umount_or_remount_ro()
> > > if [ $# -ne 1 ]
> > > then
> > > echo "Usage: _umount_or_remount_ro <device>" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > local device=$1
> > > @@ -3435,7 +3432,7 @@ _mount_or_remount_rw()
> > > {
> > > if [ $# -ne 3 ]; then
> > > echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local mount_opts=$1
> > > local device=$2
> > > @@ -3516,7 +3513,7 @@ _check_generic_filesystem()
> > > if [ $ok -eq 0 ]; then
> > > status=1
> > > if [ "$iam" != "check" ]; then
> > > - exit 1
> > > + _exit 1
> > > fi
> > > return 1
> > > fi
> > > @@ -3582,7 +3579,7 @@ _check_udf_filesystem()
> > > if [ $# -ne 1 -a $# -ne 2 ]
> > > then
> > > echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > if [ ! -x $here/src/udf_test ]
> > > @@ -3776,7 +3773,7 @@ _get_os_name()
> > > echo 'linux'
> > > else
> > > echo Unknown operating system: `uname`
> > > - exit
> > > + _exit 1
> > > fi
> > > }
> > >
> > > @@ -3837,7 +3834,7 @@ _link_out_file()
> > > _die()
> > > {
> > > echo $@
> > > - exit 1
> > > + _exit 1
> > > }
> > >
> > > # convert urandom incompressible data to compressible text data
> > > @@ -3994,7 +3991,7 @@ _require_scratch_dev_pool()
> > > if _mount | grep -q $i; then
> > > if ! _unmount $i; then
> > > echo "failed to unmount $i - aborting"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > # To help better debug when something fails, we remove
> > > @@ -4403,7 +4400,7 @@ _require_batched_discard()
> > > {
> > > if [ $# -ne 1 ]; then
> > > echo "Usage: _require_batched_discard mnt_point" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > _require_fstrim
> > >
> > > @@ -4630,7 +4627,7 @@ _require_chattr()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _require_chattr <attr>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local attribute=$1
> > >
> > > @@ -4649,7 +4646,7 @@ _get_total_inode()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_total_inode <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local nr_inode;
> > > nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
> > > @@ -4660,7 +4657,7 @@ _get_used_inode()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_used_inode <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local nr_inode;
> > > nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
> > > @@ -4671,7 +4668,7 @@ _get_used_inode_percent()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_used_inode_percent <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local pct_inode;
> > > pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
> > > @@ -4683,7 +4680,7 @@ _get_free_inode()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_free_inode <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local nr_inode;
> > > nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
> > > @@ -4696,7 +4693,7 @@ _get_available_space()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_available_space <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > $DF_PROG -B 1 $1 | tail -n1 | awk '{ print $5 }'
> > > }
> > > @@ -4707,7 +4704,7 @@ _get_total_space()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _get_total_space <mnt>"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > $DF_PROG -B 1 $1 | tail -n1 | awk '{ print $3 }'
> > > }
> > > @@ -4952,7 +4949,7 @@ init_rc()
> > > if [ "$TEST_DEV" = "" ]
> > > then
> > > echo "common/rc: Error: \$TEST_DEV is not set"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > # if $TEST_DEV is not mounted, mount it now as XFS
> > > @@ -4966,20 +4963,20 @@ init_rc()
> > > if ! _test_mount
> > > then
> > > echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > fi
> > > fi
> > >
> > > # Sanity check that TEST partition is not mounted at another mount point
> > > # or as another fs type
> > > - _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
> > > + _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || _exit 1
> > > if [ -n "$SCRATCH_DEV" ]; then
> > > # Sanity check that SCRATCH partition is not mounted at another
> > > # mount point, because it is about to be unmounted and formatted.
> > > # Another fs type for scratch is fine (bye bye old fs type).
> > > _check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
> > > - [ $? -le 1 ] || exit 1
> > > + [ $? -le 1 ] || _exit 1
> > > fi
> > >
> > > # Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
> > > @@ -5029,7 +5026,7 @@ _get_file_block_size()
> > > {
> > > if [ -z $1 ] || [ ! -d $1 ]; then
> > > echo "Missing mount point argument for _get_file_block_size"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > case "$FSTYP" in
> > > @@ -5076,7 +5073,7 @@ _get_block_size()
> > > {
> > > if [ -z $1 ] || [ ! -d $1 ]; then
> > > echo "Missing mount point argument for _get_block_size"
> > > - exit 1
> > > + _exit 1
> > > fi
> > > stat -f -c %S $1
> > > }
> > > @@ -5146,14 +5143,14 @@ _run_hugepage_fsx() {
> > > fi
> > > cat $tmp.hugepage_fsx
> > > rm -f $tmp.hugepage_fsx
> > > - test $res -ne 0 && exit 1
> > > + test $res -ne 0 && _exit 1
> > > return 0
> > > }
> > >
> > > # run fsx or exit the test
> > > run_fsx()
> > > {
> > > - _run_fsx "$@" || exit 1
> > > + _run_fsx "$@" || _exit 1
> > > }
> > >
> > > _require_statx()
> > > @@ -5318,7 +5315,7 @@ _get_max_file_size()
> > > {
> > > if [ -z $1 ] || [ ! -d $1 ]; then
> > > echo "Missing mount point argument for _get_max_file_size"
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > local mnt=$1
> > > diff --git a/common/repair b/common/repair
> > > index a79f9b2b..fd206f8e 100644
> > > --- a/common/repair
> > > +++ b/common/repair
> > > @@ -16,7 +16,7 @@ _zero_position()
> > > }'`
> > > if [ -z "$offset" -o -z "$length" ]; then
> > > echo "cannot calculate offset ($offset) or length ($length)"
> > > - exit
> > > + _exit 1
> > > fi
> > > length=`expr $length / 512`
> > > $here/src/devzero -v $value -b 1 -n $length -o $offset $SCRATCH_DEV \
> > > @@ -113,7 +113,7 @@ _filter_dd()
> > > }
> > >
> > > # do some controlled corrupting & ensure repair recovers us
> > > -#
> > > +#
> > > _check_repair()
> > > {
> > > value=$1
> > > diff --git a/common/xfs b/common/xfs
> > > index 81d568d3..96c15f3c 100644
> > > --- a/common/xfs
> > > +++ b/common/xfs
> > > @@ -553,7 +553,7 @@ _require_xfs_db_command()
> > > {
> > > if [ $# -ne 1 ]; then
> > > echo "Usage: _require_xfs_db_command command" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > command=$1
> > >
> > > @@ -789,7 +789,7 @@ _check_xfs_filesystem()
> > >
> > > if [ $# -ne 3 ]; then
> > > echo "Usage: _check_xfs_filesystem device <logdev>|none <rtdev>|none" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > >
> > > extra_mount_options=""
> > > @@ -1014,7 +1014,7 @@ _check_xfs_filesystem()
> > > if [ $ok -eq 0 ]; then
> > > status=1
> > > if [ "$iam" != "check" ]; then
> > > - exit 1
> > > + _exit 1
> > > fi
> > > return 1
> > > fi
> > > @@ -1379,7 +1379,7 @@ _require_xfs_spaceman_command()
> > > {
> > > if [ -z "$1" ]; then
> > > echo "Usage: _require_xfs_spaceman_command command [switch]" 1>&2
> > > - exit 1
> > > + _exit 1
> > > fi
> > > local command=$1
> > > shift
> > > --
> > > 2.34.1
> > >
> > >
> >
>
>
