Replace exit <return-val> with _exit <return-val> which
is introduced in the previous patch.
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@xxxxxxxxx>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@xxxxxxxxx>
Reviewed-by: Dave Chinner <dchinner@xxxxxxxxxx>
---
common/btrfs | 6 +--
common/ceph | 2 +-
common/config | 7 ++--
common/dump | 11 +++--
common/ext4 | 2 +-
common/populate | 2 +-
common/preamble | 2 +-
common/punch | 13 +++---
common/rc | 105 +++++++++++++++++++++++-------------------------
common/repair | 4 +-
common/xfs | 8 ++--
11 files changed, 78 insertions(+), 84 deletions(-)
diff --git a/common/btrfs b/common/btrfs
index a3b9c12f..3725632c 100644
--- a/common/btrfs
+++ b/common/btrfs
@@ -80,7 +80,7 @@ _require_btrfs_mkfs_feature()
{
if [ -z $1 ]; then
echo "Missing feature name argument for _require_btrfs_mkfs_feature"
- exit 1
+ _exit 1
fi
feat=$1
$MKFS_BTRFS_PROG -O list-all 2>&1 | \
@@ -104,7 +104,7 @@ _require_btrfs_fs_feature()
{
if [ -z $1 ]; then
echo "Missing feature name argument for _require_btrfs_fs_feature"
- exit 1
+ _exit 1
fi
feat=$1
modprobe btrfs > /dev/null 2>&1
@@ -214,7 +214,7 @@ _check_btrfs_filesystem()
if [ $ok -eq 0 ]; then
status=1
if [ "$iam" != "check" ]; then
- exit 1
+ _exit 1
fi
return 1
fi
diff --git a/common/ceph b/common/ceph
index d6f24df1..df7a6814 100644
--- a/common/ceph
+++ b/common/ceph
@@ -14,7 +14,7 @@ _ceph_create_file_layout()
if [ -e $fname ]; then
echo "File $fname already exists."
- exit 1
+ _exit 1
fi
touch $fname
$SETFATTR_PROG -n ceph.file.layout \
diff --git a/common/config b/common/config
index 7dd78dbe..eada3971 100644
--- a/common/config
+++ b/common/config
@@ -124,8 +124,7 @@ set_mkfs_prog_path_with_opts()
_fatal()
{
echo "$*"
- status=1
- exit 1
+ _exit 1
}
export MKFS_PROG="$(type -P mkfs)"
@@ -869,7 +868,7 @@ get_next_config() {
echo "Warning: need to define parameters for host $HOST"
echo " or set variables:"
echo " $MC"
- exit 1
+ _exit 1
fi
_check_device TEST_DEV required $TEST_DEV
@@ -880,7 +879,7 @@ get_next_config() {
if [ ! -z "$SCRATCH_DEV_POOL" ]; then
if [ ! -z "$SCRATCH_DEV" ]; then
echo "common/config: Error: \$SCRATCH_DEV ($SCRATCH_DEV) should be unset when \$SCRATCH_DEV_POOL ($SCRATCH_DEV_POOL) is set"
- exit 1
+ _exit 1
fi
SCRATCH_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
export SCRATCH_DEV
diff --git a/common/dump b/common/dump
index 6dcd6250..09859006 100644
--- a/common/dump
+++ b/common/dump
@@ -280,8 +280,7 @@ _create_dumpdir_stress_num()
rm -rf $dump_dir
if ! mkdir $dump_dir; then
echo " failed to mkdir $dump_dir"
- status=1
- exit
+ _exit 1
fi
# Remove fsstress commands that aren't supported on all xfs configs so that
@@ -480,7 +479,7 @@ _do_create_dumpdir_fill()
else
$verbose && echo
echo "Error: cannot mkdir \"$dir\""
- exit 1
+ _exit 1
fi
fi
else
@@ -496,7 +495,7 @@ _do_create_dumpdir_fill()
else
$verbose && echo
echo "Error: cannot mkdir \"$dir\""
- exit 1
+ _exit 1
fi
fi
fi
@@ -507,7 +506,7 @@ _do_create_dumpdir_fill()
else
$verbose && echo
echo "Error: cannot create \"$file\""
- exit 1
+ _exit 1
fi
fi
if [ -n "$owner" -a -n "$group" ]; then
@@ -649,7 +648,7 @@ _do_create_dump_symlinks()
else
$verbose && echo
echo "Error: cannot mkdir \"$dir\""
- exit 1
+ _exit 1
fi
fi
fi
diff --git a/common/ext4 b/common/ext4
index e1b336d3..f88fa532 100644
--- a/common/ext4
+++ b/common/ext4
@@ -182,7 +182,7 @@ _require_scratch_ext4_feature()
{
if [ -z "$1" ]; then
echo "Usage: _require_scratch_ext4_feature feature"
- exit 1
+ _exit 1
fi
$MKFS_EXT4_PROG -F $MKFS_OPTIONS -O "$1" \
$SCRATCH_DEV 512m >/dev/null 2>&1 \
diff --git a/common/populate b/common/populate
index 7352f598..50dc75d3 100644
--- a/common/populate
+++ b/common/populate
@@ -1003,7 +1003,7 @@ _fill_fs()
if [ $# -ne 4 ]; then
echo "Usage: _fill_fs filesize dir blocksize switch_user"
- exit 1
+ _exit 1
fi
if [ $switch_user -eq 0 ]; then
diff --git a/common/preamble b/common/preamble
index c92e55bb..ba029a34 100644
--- a/common/preamble
+++ b/common/preamble
@@ -35,7 +35,7 @@ _begin_fstest()
{
if [ -n "$seq" ]; then
echo "_begin_fstest can only be called once!"
- exit 1
+ _exit 1
fi
seq=`basename $0`
diff --git a/common/punch b/common/punch
index 43ccab69..64d665d8 100644
--- a/common/punch
+++ b/common/punch
@@ -172,16 +172,16 @@ _filter_fiemap_flags()
$AWK_PROG -e "$awk_script" | _coalesce_extents
}
-# Filters fiemap output to only print the
+# Filters fiemap output to only print the
# file offset column and whether or not
# it is an extent or a hole
_filter_hole_fiemap()
{
$AWK_PROG '
$3 ~ /hole/ {
- print $1, $2, $3;
+ print $1, $2, $3;
next;
- }
+ }
$5 ~ /0x[[:xdigit:]]+/ {
print $1, $2, "extent";
}' |
@@ -224,8 +224,7 @@ _filter_bmap()
die_now()
{
- status=1
- exit
+ _exit 1
}
# test the different corner cases for zeroing a range:
@@ -276,7 +275,7 @@ _test_generic_punch()
u) unwritten_tests=
;;
?) echo Invalid flag
- exit 1
+ _exit 1
;;
esac
done
@@ -552,7 +551,7 @@ _test_block_boundaries()
d) sync_cmd=
;;
?) echo Invalid flag
- exit 1
+ _exit 1
;;
esac
done
diff --git a/common/rc b/common/rc
index 038c22f6..3b21eb27 100644
--- a/common/rc
+++ b/common/rc
@@ -909,8 +909,7 @@ _mkfs_dev()
# output stored mkfs output
cat $tmp.mkfserr >&2
cat $tmp.mkfsstd
- status=1
- exit 1
+ _exit 1
fi
rm -f $tmp.mkfserr $tmp.mkfsstd
}
@@ -1575,7 +1574,7 @@ _get_pids_by_name()
if [ $# -ne 1 ]
then
echo "Usage: _get_pids_by_name process-name" 1>&2
- exit 1
+ _exit 1
fi
# Algorithm ... all ps(1) variants have a time of the form MM:SS or
@@ -1609,7 +1608,7 @@ _df_device()
if [ $# -ne 1 ]
then
echo "Usage: _df_device device" 1>&2
- exit 1
+ _exit 1
fi
# Note that we use "==" here so awk doesn't try to interpret an NFS over
@@ -1641,7 +1640,7 @@ _df_dir()
if [ $# -ne 1 ]
then
echo "Usage: _df_dir device" 1>&2
- exit 1
+ _exit 1
fi
$DF_PROG $1 2>/dev/null | $AWK_PROG -v what=$1 '
@@ -1667,7 +1666,7 @@ _used()
if [ $# -ne 1 ]
then
echo "Usage: _used device" 1>&2
- exit 1
+ _exit 1
fi
_df_device $1 | $AWK_PROG '{ sub("%", "") ; print $6 }'
@@ -1680,7 +1679,7 @@ _fs_type()
if [ $# -ne 1 ]
then
echo "Usage: _fs_type device" 1>&2
- exit 1
+ _exit 1
fi
#
@@ -1705,7 +1704,7 @@ _fs_options()
if [ $# -ne 1 ]
then
echo "Usage: _fs_options device" 1>&2
- exit 1
+ _exit 1
fi
$AWK_PROG -v dev=$1 '
@@ -1720,7 +1719,7 @@ _is_block_dev()
if [ $# -ne 1 ]
then
echo "Usage: _is_block_dev dev" 1>&2
- exit 1
+ _exit 1
fi
local dev=$1
@@ -1739,7 +1738,7 @@ _is_char_dev()
{
if [ $# -ne 1 ]; then
echo "Usage: _is_char_dev dev" 1>&2
- exit 1
+ _exit 1
fi
local dev=$1
@@ -1772,7 +1771,7 @@ _do()
echo -n "$note... "
else
echo "Usage: _do [note] cmd" 1>&2
- status=1; exit
+ _exit 1
fi
(eval "echo '---' \"$cmd\"") >>$seqres.full
@@ -1793,7 +1792,7 @@ _do()
then
[ $# -ne 2 ] && echo
eval "echo \"$cmd\" failed \(returned $ret\): see $seqres.full"
- status=1; exit
+ _exit 1
fi
return $ret
@@ -1809,8 +1808,7 @@ _notrun()
rm -f ${RESULT_DIR}/require_test*
rm -f ${RESULT_DIR}/require_scratch*
- status=0
- exit
+ _exit 0
}
# just plain bail out
@@ -1819,8 +1817,7 @@ _fail()
{
echo "$*" | tee -a $seqres.full
echo "(see $seqres.full for details)"
- status=1
- exit 1
+ _exit 1
}
#
@@ -2049,14 +2046,14 @@ _require_scratch_nocheck()
_check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
local err=$?
- [ $err -le 1 ] || exit 1
+ [ $err -le 1 ] || _exit 1
if [ $err -eq 0 ]
then
# if it's mounted, unmount it
if ! _scratch_unmount
then
echo "failed to unmount $SCRATCH_DEV"
- exit 1
+ _exit 1
fi
fi
rm -f ${RESULT_DIR}/require_scratch "$RESULT_DIR/.skip_orebuild" "$RESULT_DIR/.skip_rebuild"
@@ -2273,13 +2270,13 @@ _require_test()
_check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR
local err=$?
- [ $err -le 1 ] || exit 1
+ [ $err -le 1 ] || _exit 1
if [ $err -ne 0 ]
then
if ! _test_mount
then
echo "!!! failed to mount $TEST_DEV on $TEST_DIR"
- exit 1
+ _exit 1
fi
fi
touch ${RESULT_DIR}/require_test
@@ -2391,7 +2388,7 @@ _require_block_device()
{
if [ -z "$1" ]; then
echo "Usage: _require_block_device <dev>" 1>&2
- exit 1
+ _exit 1
fi
if [ "`_is_block_dev "$1"`" == "" ]; then
_notrun "require $1 to be valid block disk"
@@ -2404,7 +2401,7 @@ _require_local_device()
{
if [ -z "$1" ]; then
echo "Usage: _require_local_device <dev>" 1>&2
- exit 1
+ _exit 1
fi
if [ "`_is_block_dev "$1"`" != "" ]; then
return 0
@@ -2512,7 +2509,7 @@ _zone_type()
local target=$1
if [ -z $target ]; then
echo "Usage: _zone_type <device>"
- exit 1
+ _exit 1
fi
local sdev=`_short_dev $target`
@@ -2528,7 +2525,7 @@ _require_zoned_device()
local target=$1
if [ -z $target ]; then
echo "Usage: _require_zoned_device <device>"
- exit 1
+ _exit 1
fi
local type=`_zone_type ${target}`
@@ -2668,7 +2665,7 @@ _run_aiodio()
if [ -z "$1" ]
then
echo "usage: _run_aiodio command_name" 2>&1
- status=1; exit 1
+ _exit 1
fi
_require_aiodio $1
@@ -2880,7 +2877,7 @@ _require_xfs_io_command()
if [ -z "$1" ]
then
echo "Usage: _require_xfs_io_command command [switch]" 1>&2
- exit 1
+ _exit 1
fi
local command=$1
shift
@@ -3364,7 +3361,7 @@ _is_dev_mounted()
if [ $# -lt 1 ]; then
echo "Usage: _is_dev_mounted <device> [fstype]" 1>&2
- exit 1
+ _exit 1
fi
findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
@@ -3378,7 +3375,7 @@ _is_dir_mountpoint()
if [ $# -lt 1 ]; then
echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
- exit 1
+ _exit 1
fi
findmnt -rncv -t $fstype -o TARGET $dir | head -1
@@ -3391,7 +3388,7 @@ _remount()
if [ $# -ne 2 ]
then
echo "Usage: _remount device ro/rw" 1>&2
- exit 1
+ _exit 1
fi
local device=$1
local mode=$2
@@ -3399,7 +3396,7 @@ _remount()
if ! mount -o remount,$mode $device
then
echo "_remount: failed to remount filesystem on $device as $mode"
- exit 1
+ _exit 1
fi
}
@@ -3417,7 +3414,7 @@ _umount_or_remount_ro()
if [ $# -ne 1 ]
then
echo "Usage: _umount_or_remount_ro <device>" 1>&2
- exit 1
+ _exit 1
fi
local device=$1
@@ -3435,7 +3432,7 @@ _mount_or_remount_rw()
{
if [ $# -ne 3 ]; then
echo "Usage: _mount_or_remount_rw <opts> <dev> <mnt>" 1>&2
- exit 1
+ _exit 1
fi
local mount_opts=$1
local device=$2
@@ -3516,7 +3513,7 @@ _check_generic_filesystem()
if [ $ok -eq 0 ]; then
status=1
if [ "$iam" != "check" ]; then
- exit 1
+ _exit 1
fi
return 1
fi
@@ -3582,7 +3579,7 @@ _check_udf_filesystem()
if [ $# -ne 1 -a $# -ne 2 ]
then
echo "Usage: _check_udf_filesystem device [last_block]" 1>&2
- exit 1
+ _exit 1
fi
if [ ! -x $here/src/udf_test ]
@@ -3776,7 +3773,7 @@ _get_os_name()
echo 'linux'
else
echo Unknown operating system: `uname`
- exit
+ _exit 1
fi
}
@@ -3837,7 +3834,7 @@ _link_out_file()
_die()
{
echo $@
- exit 1
+ _exit 1
}
# convert urandom incompressible data to compressible text data
@@ -3994,7 +3991,7 @@ _require_scratch_dev_pool()
if _mount | grep -q $i; then
if ! _unmount $i; then
echo "failed to unmount $i - aborting"
- exit 1
+ _exit 1
fi
fi
# To help better debug when something fails, we remove
@@ -4403,7 +4400,7 @@ _require_batched_discard()
{
if [ $# -ne 1 ]; then
echo "Usage: _require_batched_discard mnt_point" 1>&2
- exit 1
+ _exit 1
fi
_require_fstrim
@@ -4630,7 +4627,7 @@ _require_chattr()
{
if [ -z "$1" ]; then
echo "Usage: _require_chattr <attr>"
- exit 1
+ _exit 1
fi
local attribute=$1
@@ -4649,7 +4646,7 @@ _get_total_inode()
{
if [ -z "$1" ]; then
echo "Usage: _get_total_inode <mnt>"
- exit 1
+ _exit 1
fi
local nr_inode;
nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $3}'`
@@ -4660,7 +4657,7 @@ _get_used_inode()
{
if [ -z "$1" ]; then
echo "Usage: _get_used_inode <mnt>"
- exit 1
+ _exit 1
fi
local nr_inode;
nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $4}'`
@@ -4671,7 +4668,7 @@ _get_used_inode_percent()
{
if [ -z "$1" ]; then
echo "Usage: _get_used_inode_percent <mnt>"
- exit 1
+ _exit 1
fi
local pct_inode;
pct_inode=`$DF_PROG -i $1 | tail -1 | awk '{ print $6 }' | \
@@ -4683,7 +4680,7 @@ _get_free_inode()
{
if [ -z "$1" ]; then
echo "Usage: _get_free_inode <mnt>"
- exit 1
+ _exit 1
fi
local nr_inode;
nr_inode=`$DF_PROG -i $1 | tail -1 | awk '{print $5}'`
@@ -4696,7 +4693,7 @@ _get_available_space()
{
if [ -z "$1" ]; then
echo "Usage: _get_available_space <mnt>"
- exit 1
+ _exit 1
fi
$DF_PROG -B 1 $1 | tail -n1 | awk '{ print $5 }'
}
@@ -4707,7 +4704,7 @@ _get_total_space()
{
if [ -z "$1" ]; then
echo "Usage: _get_total_space <mnt>"
- exit 1
+ _exit 1
fi
$DF_PROG -B 1 $1 | tail -n1 | awk '{ print $3 }'
}
@@ -4952,7 +4949,7 @@ init_rc()
if [ "$TEST_DEV" = "" ]
then
echo "common/rc: Error: \$TEST_DEV is not set"
- exit 1
+ _exit 1
fi
# if $TEST_DEV is not mounted, mount it now as XFS
@@ -4966,20 +4963,20 @@ init_rc()
if ! _test_mount
then
echo "common/rc: could not mount $TEST_DEV on $TEST_DIR"
- exit 1
+ _exit 1
fi
fi
fi
# Sanity check that TEST partition is not mounted at another mount point
# or as another fs type
- _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || exit 1
+ _check_mounted_on TEST_DEV $TEST_DEV TEST_DIR $TEST_DIR $FSTYP || _exit 1
if [ -n "$SCRATCH_DEV" ]; then
# Sanity check that SCRATCH partition is not mounted at another
# mount point, because it is about to be unmounted and formatted.
# Another fs type for scratch is fine (bye bye old fs type).
_check_mounted_on SCRATCH_DEV $SCRATCH_DEV SCRATCH_MNT $SCRATCH_MNT
- [ $? -le 1 ] || exit 1
+ [ $? -le 1 ] || _exit 1
fi
# Figure out if we need to add -F ("foreign", deprecated) option to xfs_io
@@ -5029,7 +5026,7 @@ _get_file_block_size()
{
if [ -z $1 ] || [ ! -d $1 ]; then
echo "Missing mount point argument for _get_file_block_size"
- exit 1
+ _exit 1
fi
case "$FSTYP" in
@@ -5076,7 +5073,7 @@ _get_block_size()
{
if [ -z $1 ] || [ ! -d $1 ]; then
echo "Missing mount point argument for _get_block_size"
- exit 1
+ _exit 1
fi
stat -f -c %S $1
}
@@ -5146,14 +5143,14 @@ _run_hugepage_fsx() {
fi
cat $tmp.hugepage_fsx
rm -f $tmp.hugepage_fsx
- test $res -ne 0 && exit 1
+ test $res -ne 0 && _exit 1
return 0
}
# run fsx or exit the test
run_fsx()
{
- _run_fsx "$@" || exit 1
+ _run_fsx "$@" || _exit 1
}
_require_statx()
@@ -5318,7 +5315,7 @@ _get_max_file_size()
{
if [ -z $1 ] || [ ! -d $1 ]; then
echo "Missing mount point argument for _get_max_file_size"
- exit 1
+ _exit 1
fi
local mnt=$1
diff --git a/common/repair b/common/repair
index a79f9b2b..fd206f8e 100644
--- a/common/repair
+++ b/common/repair
@@ -16,7 +16,7 @@ _zero_position()
}'`
if [ -z "$offset" -o -z "$length" ]; then
echo "cannot calculate offset ($offset) or length ($length)"
- exit
+ _exit 1
fi
length=`expr $length / 512`
$here/src/devzero -v $value -b 1 -n $length -o $offset $SCRATCH_DEV \
@@ -113,7 +113,7 @@ _filter_dd()
}
# do some controlled corrupting & ensure repair recovers us
-#
+#
_check_repair()
{
value=$1
diff --git a/common/xfs b/common/xfs
index 81d568d3..96c15f3c 100644
--- a/common/xfs
+++ b/common/xfs
@@ -553,7 +553,7 @@ _require_xfs_db_command()
{
if [ $# -ne 1 ]; then
echo "Usage: _require_xfs_db_command command" 1>&2
- exit 1
+ _exit 1
fi
command=$1
@@ -789,7 +789,7 @@ _check_xfs_filesystem()
if [ $# -ne 3 ]; then
echo "Usage: _check_xfs_filesystem device <logdev>|none <rtdev>|none" 1>&2
- exit 1
+ _exit 1
fi
extra_mount_options=""
@@ -1014,7 +1014,7 @@ _check_xfs_filesystem()
if [ $ok -eq 0 ]; then
status=1
if [ "$iam" != "check" ]; then
- exit 1
+ _exit 1
fi
return 1
fi
@@ -1379,7 +1379,7 @@ _require_xfs_spaceman_command()
{
if [ -z "$1" ]; then
echo "Usage: _require_xfs_spaceman_command command [switch]" 1>&2
- exit 1
+ _exit 1
fi
local command=$1
shift
--
2.34.1
