From: Yu Kuai <yukuai3@xxxxxxxxxx>
Currently, split bio will be chained to original bio, and original bio
will be resubmitted to the tail of current->bio_list, waiting for
split bio to be issued. However, if split bio get split again, the IO
order will be messed up, for example, in raid456 IO will first be
split by max_sector from md_submit_bio(), and then later be split
again by chunksize for internal handling:
For example, assume max_sectors is 1M, and chunksize is 512k
1) issue a 2M IO:
bio issuing: 0+2M
current->bio_list: NULL
2) md_submit_bio() split by max_sector:
bio issuing: 0+1M
current->bio_list: 1M+1M
3) chunk_aligned_read() split by chunksize:
bio issuing: 0+512k
current->bio_list: 1M+1M -> 512k+512k
4) after first bio issued, __submit_bio_noacct() will contuine issuing
next bio:
bio issuing: 1M+1M
current->bio_list: 512k+512k
bio issued: 0+512k
5) chunk_aligned_read() split by chunksize:
bio issuing: 1M+512k
current->bio_list: 512k+512k -> 1536k+512k
bio issued: 0+512k
6) no split afterwards, finally the issue order is:
0+512k -> 1M+512k -> 512k+512k -> 1536k+512k
This behaviour will cause large IO read on raid456 endup to be small
discontinuous IO in underlying disks. Fix this problem by placing split
bio to the head of current->bio_list.
Test script: test on 8 disk raid5 with 64k chunksize
dd if=/dev/md0 of=/dev/null bs=4480k iflag=direct
Test results:
Before this patch
1) iostat results:
Device r/s rMB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util
md0 52430.00 3276.87 0.00 0.00 0.62 64.00 32.60 80.10
sd* 4487.00 409.00 2054.00 31.40 0.82 93.34 3.68 71.20
2) blktrace G stage:
8,0 0 486445 11.357392936 843 G R 14071424 + 128 [dd]
8,0 0 486451 11.357466360 843 G R 14071168 + 128 [dd]
8,0 0 486454 11.357515868 843 G R 14071296 + 128 [dd]
8,0 0 486468 11.357968099 843 G R 14072192 + 128 [dd]
8,0 0 486474 11.358031320 843 G R 14071936 + 128 [dd]
8,0 0 486480 11.358096298 843 G R 14071552 + 128 [dd]
8,0 0 486490 11.358303858 843 G R 14071808 + 128 [dd]
3) io seek for sdx:
Noted io seek is the result from blktrace D stage, statistic of:
ABS((offset of next IO) - (offset + len of previous IO))
Read|Write seek
cnt 55175, zero cnt 25079
>=(KB) .. <(KB) : count ratio |distribution |
0 .. 1 : 25079 45.5% |########################################|
1 .. 2 : 0 0.0% | |
2 .. 4 : 0 0.0% | |
4 .. 8 : 0 0.0% | |
8 .. 16 : 0 0.0% | |
16 .. 32 : 0 0.0% | |
32 .. 64 : 12540 22.7% |##################### |
64 .. 128 : 2508 4.5% |##### |
128 .. 256 : 0 0.0% | |
256 .. 512 : 10032 18.2% |################# |
512 .. 1024 : 5016 9.1% |######### |
After this patch:
1) iostat results:
Device r/s rMB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util
md0 87965.00 5271.88 0.00 0.00 0.16 61.37 14.03 90.60
sd* 6020.00 658.44 5117.00 45.95 0.44 112.00 2.68 86.50
2) blktrace G stage:
8,0 0 206296 5.354894072 664 G R 7156992 + 128 [dd]
8,0 0 206305 5.355018179 664 G R 7157248 + 128 [dd]
8,0 0 206316 5.355204438 664 G R 7157504 + 128 [dd]
8,0 0 206319 5.355241048 664 G R 7157760 + 128 [dd]
8,0 0 206333 5.355500923 664 G R 7158016 + 128 [dd]
8,0 0 206344 5.355837806 664 G R 7158272 + 128 [dd]
8,0 0 206353 5.355960395 664 G R 7158528 + 128 [dd]
8,0 0 206357 5.356020772 664 G R 7158784 + 128 [dd]
3) io seek for sdx
Read|Write seek
cnt 28644, zero cnt 21483
>=(KB) .. <(KB) : count ratio |distribution |
0 .. 1 : 21483 75.0% |########################################|
1 .. 2 : 0 0.0% | |
2 .. 4 : 0 0.0% | |
4 .. 8 : 0 0.0% | |
8 .. 16 : 0 0.0% | |
16 .. 32 : 0 0.0% | |
32 .. 64 : 7161 25.0% |############## |
BTW, this looks like a long term problem from day one, and large
sequential IO read is pretty common case like video playing.
And even with this patch, in this test case IO is merged to at most 128k
is due to block layer plug limit BLK_PLUG_FLUSH_SIZE, increase such
limit can get even better performance. However, we'll figure out how to do
this properly later.
Fixes: d89d87965dcb ("When stacked block devices are in-use (e.g. md or dm), the recursive calls")
Reported-by: Tie Ren <tieren@xxxxxxxxx>
Closes: https://lore.kernel.org/all/7dro5o7u5t64d6bgiansesjavxcuvkq5p2pok7dtwkav7b7ape@3isfr44b6352/
Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
---
block/blk-core.c | 21 ++++++++++++++-------
block/blk-throttle.c | 2 +-
block/blk.h | 2 +-
3 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 37836446f365..b643d3b1e9fe 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -725,7 +725,7 @@ static void __submit_bio_noacct_mq(struct bio *bio)
current->bio_list = NULL;
}
-void submit_bio_noacct_nocheck(struct bio *bio)
+void submit_bio_noacct_nocheck(struct bio *bio, bool split)
{
blk_cgroup_bio_start(bio);
blkcg_bio_issue_init(bio);
@@ -745,12 +745,16 @@ void submit_bio_noacct_nocheck(struct bio *bio)
* to collect a list of requests submited by a ->submit_bio method while
* it is active, and then process them after it returned.
*/
- if (current->bio_list)
- bio_list_add(¤t->bio_list[0], bio);
- else if (!bdev_test_flag(bio->bi_bdev, BD_HAS_SUBMIT_BIO))
+ if (current->bio_list) {
+ if (split)
+ bio_list_add_head(¤t->bio_list[0], bio);
+ else
+ bio_list_add(¤t->bio_list[0], bio);
