On Tue, Apr 15, 2025 at 11:44:04AM -0700, Darrick J. Wong wrote:
<snip>
> > > +test_atomic_writes()
> > > +{
> > > + local bsize=$1
> > > +
> > > + get_mkfs_opts $bsize
> > > + _scratch_mkfs $mkfs_opts >> $seqres.full
> > > + _scratch_mount
> > > +
> > > + test "$FSTYP" = "xfs" && _xfs_force_bdev data $SCRATCH_MNT
> >
> > Ok, this (_xfs_force_bdev()) clears the rtinherit flag on $SCRATCH_MNT
> > in case if someone is passing that in MKFS_OPTIONS right? But since we
> > are using our own mkfs_opts, then do we still need this?
Yes, we still need this because _scratch_mkfs will try to combine
$MKFS_OPTIONS and the local $mkfs_opts, so rtinherit=1 could still be
set.
--D
> >
> > > +
> > > + testfile=$SCRATCH_MNT/testfile
> > > + touch $testfile
> > > +
> > > + file_min_write=$(_get_atomic_write_unit_min $testfile)
> > > + file_max_write=$(_get_atomic_write_unit_max $testfile)
> > > + file_max_segments=$(_get_atomic_write_segments_max $testfile)
> > > +
> > > + # Check that atomic min/max = FS block size
> > > + test $file_min_write -eq $bsize || \
> > > + echo "atomic write min $file_min_write, should be fs block size $bsize"
> > > + test $file_min_write -eq $bsize || \
> >
> > we should check for $file_max_write here ^^
> >
> > > + echo "atomic write max $file_max_write, should be fs block size $bsize"
> > > + test $file_max_segments -eq 1 || \
> > > + echo "atomic write max segments $file_max_segments, should be 1"
> > > +
> > > + # Check that we can perform an atomic write of len = FS block size
> > > + bytes_written=$($XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $bsize" $testfile | \
> > > + grep wrote | awk -F'[/ ]' '{print $2}')
> > > + test $bytes_written -eq $bsize || echo "atomic write len=$bsize failed"
> > > +
> > > + # Check that we can perform an atomic single-block cow write
> > > + if [ "$FSTYP" == "xfs" ]; then
> > > + testfile_cp=$SCRATCH_MNT/testfile_copy
> > > + if _xfs_has_feature $SCRATCH_MNT reflink; then
> > > + cp --reflink $testfile $testfile_cp
> > > + fi
> > > + bytes_written=$($XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $bsize" $testfile_cp | \
> > > + grep wrote | awk -F'[/ ]' '{print $2}')
> > > + test $bytes_written -eq $bsize || echo "atomic write on reflinked file failed"
> > > + fi
> > > +
> > > + # Check that we can perform an atomic write on an unwritten block
> > > + $XFS_IO_PROG -c "falloc $bsize $bsize" $testfile
> > > + bytes_written=$($XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize $bsize $bsize" $testfile | \
> > > + grep wrote | awk -F'[/ ]' '{print $2}')
> > > + test $bytes_written -eq $bsize || echo "atomic write to unwritten block failed"
> > > +
> > > + # Check that we can perform an atomic write on a sparse hole
> > > + $XFS_IO_PROG -c "fpunch 0 $bsize" $testfile
> > > + bytes_written=$($XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $bsize" $testfile | \
> > > + grep wrote | awk -F'[/ ]' '{print $2}')
> > > + test $bytes_written -eq $bsize || echo "atomic write to sparse hole failed"
> > > +
> > > + # Check that we can perform an atomic write on a fully mapped block
> > > + bytes_written=$($XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $bsize" $testfile | \
> > > + grep wrote | awk -F'[/ ]' '{print $2}')
> > > + test $bytes_written -eq $bsize || echo "atomic write to mapped block failed"
> > > +
> > > + # Reject atomic write if len is out of bounds
> > > + $XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $((bsize - 1))" $testfile 2>> $seqres.full && \
> > > + echo "atomic write len=$((bsize - 1)) should fail"
> > > + $XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $((bsize + 1))" $testfile 2>> $seqres.full && \
> > > + echo "atomic write len=$((bsize + 1)) should fail"
> > > +
> > > + # Reject atomic write when iovecs > 1
> > > + $XFS_IO_PROG -dc "pwrite -A -D -V2 -b $bsize 0 $bsize" $testfile 2>> $seqres.full && \
> > > + echo "atomic write only supports iovec count of 1"
> > > +
> > > + # Reject atomic write when not using direct I/O
> > > + $XFS_IO_PROG -c "pwrite -A -V1 -b $bsize 0 $bsize" $testfile 2>> $seqres.full && \
> > > + echo "atomic write requires direct I/O"
> > > +
> > > + # Reject atomic write when offset % bsize != 0
> > > + $XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 1 $bsize" $testfile 2>> $seqres.full && \
> > > + echo "atomic write requires offset to be aligned to bsize"
> > > +
> > > + _scratch_unmount
> > > +}
> > > +
> > > +test_atomic_write_bounds()
> > > +{
> > > + local bsize=$1
> > > +
> > > + get_mkfs_opts $bsize
> > > + _scratch_mkfs $mkfs_opts >> $seqres.full
> > > + _scratch_mount
> > > +
> > > + test "$FSTYP" = "xfs" && _xfs_force_bdev data $SCRATCH_MNT
> >
> > ditto
> >
> > -ritesh
> >
> > > +
> > > + testfile=$SCRATCH_MNT/testfile
> > > + touch $testfile
> > > +
> > > + $XFS_IO_PROG -dc "pwrite -A -D -V1 -b $bsize 0 $bsize" $testfile 2>> $seqres.full && \
> > > + echo "atomic write should fail when bsize is out of bounds"
> > > +
> > > + _scratch_unmount
> > > +}
> > > +
> > > +sys_min_write=$(cat "/sys/block/$(_short_dev $SCRATCH_DEV)/queue/atomic_write_unit_min_bytes")
> > > +sys_max_write=$(cat "/sys/block/$(_short_dev $SCRATCH_DEV)/queue/atomic_write_unit_max_bytes")
> > > +
> > > +bdev_min_write=$(_get_atomic_write_unit_min $SCRATCH_DEV)
> > > +bdev_max_write=$(_get_atomic_write_unit_max $SCRATCH_DEV)
> > > +
> > > +# Test that statx atomic values are the same as sysfs values
> > > +if [ "$sys_min_write" -ne "$bdev_min_write" ]; then
> > > + echo "bdev min write != sys min write"
> > > +fi
> > > +if [ "$sys_max_write" -ne "$bdev_max_write" ]; then
> > > + echo "bdev max write != sys max write"
> > > +fi
> > > +
> > > +get_supported_bsize
> > > +
> > > +# Test all supported block sizes between bdev min and max
> > > +for ((bsize=$bdev_min_write; bsize<=bdev_max_write; bsize*=2)); do
> > > + if [ "$bsize" -ge "$min_bsize" ] && [ "$bsize" -le "$max_bsize" ]; then
> > > + test_atomic_writes $bsize
> > > + fi
> > > +done;
> > > +
> > > +# Check that atomic write fails if bsize < bdev min or bsize > bdev max
> > > +if [ $((bdev_min_write / 2)) -ge "$min_bsize" ]; then
> > > + test_atomic_write_bounds $((bdev_min_write / 2))
> > > +fi
> > > +if [ $((bdev_max_write * 2)) -le "$max_bsize" ]; then
> > > + test_atomic_write_bounds $((bdev_max_write * 2))
> > > +fi
> > > +
> > > +# success, all done
> > > +echo Silence is golden
> > > +status=0
> > > +exit
> > > diff --git a/tests/generic/765.out b/tests/generic/765.out
> > > new file mode 100644
> > > index 00000000..39c254ae
> > > --- /dev/null
> > > +++ b/tests/generic/765.out
> > > @@ -0,0 +1,2 @@
> > > +QA output created by 765
> > > +Silence is golden
> > > --
> > > 2.34.1
> >
>
