On Sun, Aug 10, 2025 at 07:12:02PM +0530, Ojaswin Mujoo wrote:
> In ext4, even if an allocated range is physically and logically
> contiguous, it can still be split into 2 extents. This is because ext4
> does not merge extents across leaf nodes. This is an issue for atomic
> writes since even for a continuous extent the map block could (in rare
> cases) return a shorter map, hence tearning the write. This test creates
> such a file and ensures that the atomic write handles this case
> correctly
>
> Signed-off-by: Ojaswin Mujoo <ojaswin@xxxxxxxxxxxxx>
> ---
> tests/ext4/063 | 129 +++++++++++++++++++++++++++++++++++++++++++++
> tests/ext4/063.out | 2 +
> 2 files changed, 131 insertions(+)
> create mode 100755 tests/ext4/063
> create mode 100644 tests/ext4/063.out
>
> diff --git a/tests/ext4/063 b/tests/ext4/063
> new file mode 100755
> index 00000000..40867acb
> --- /dev/null
> +++ b/tests/ext4/063
> @@ -0,0 +1,129 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2025 IBM Corporation. All Rights Reserved.
> +#
> +# In ext4, even if an allocated range is physically and logically contiguous,
> +# it can still be split into 2 extents. This is because ext4 does not merge
> +# extents across leaf nodes. This is an issue for atomic writes since even for
> +# a continuous extent the map block could (in rare cases) return a shorter map,
> +# hence tearning the write. This test creates such a file and ensures that the
> +# atomic write handles this case correctly
> +#
> +. ./common/preamble
> +. ./common/atomicwrites
> +_begin_fstest auto atomicwrites
> +
> +_require_scratch_write_atomic_multi_fsblock
> +_require_atomic_write_test_commands
> +_require_command "$DEBUGFS_PROG" debugfs
> +
> +prep() {
> + local bs=`_get_block_size $SCRATCH_MNT`
> + local ex_hdr_bytes=12
> + local ex_entry_bytes=12
> + local entries_per_blk=$(( (bs - ex_hdr_bytes) / ex_entry_bytes ))
> +
> + # fill the extent tree leaf with bs len extents at alternate offsets.
> + # The tree should look as follows
> + #
> + # +---------+---------+
> + # | index 1 | index 2 |
> + # +-----+---+-----+---+
> + # +------+ +-----------+
> + # | |
> + # +-------+-------+---+---------+ +-----+----+
> + # | ex 1 | ex 2 | | ex n | | ex n+1 |
> + # | off:0 | off:2 |...| off:678 | | off:680 |
> + # | len:1 | len:1 | | len:1 | | len:1 |
> + # +-------+-------+---+---------+ +----------+
> + #
> + for i in $(seq 0 $entries_per_blk)
> + do
> + $XFS_IO_PROG -fc "pwrite -b $bs $((i * 2 * bs)) $bs" $testfile > /dev/null
> + done
> + sync $testfile
> +
> + echo >> $seqres.full
> + echo "Create file with extents spanning 2 leaves. Extents:">> $seqres.full
> + echo "...">> $seqres.full
> + $DEBUGFS_PROG -R "ex `basename $testfile`" $SCRATCH_DEV |& tail >> $seqres.full
> +
> + # Now try to insert a new extent ex(new) between ex(n) and ex(n+1).
> + # Since this is a new FS the allocator would find continuous blocks
> + # such that ex(n) ex(new) ex(n+1) are physically(and logically)
> + # contiguous. However, since we dont merge extents across leaf we will
> + # end up with a tree as:
> + #
> + # +---------+---------+
> + # | index 1 | index 2 |
> + # +-----+---+-----+---+
> + # +------+ +------------+
> + # | |
> + # +-------+-------+---+---------+ +------+-----------+
> + # | ex 1 | ex 2 | | ex n | | ex n+1 (merged) |
> + # | off:0 | off:2 |...| off:678 | | off:679 |
> + # | len:1 | len:1 | | len:1 | | len:2 |
> + # +-------+-------+---+---------+ +------------------+
> + #
Thanks for the nice picture demonstrating what you're trying to test!
Reviewed-by: "Darrick J. Wong" <djwong@xxxxxxxxxx>
--D
> + echo >> $seqres.full
> + torn_ex_offset=$((((entries_per_blk * 2) - 1) * bs))
> + $XFS_IO_PROG -c "pwrite $torn_ex_offset $bs" $testfile >> /dev/null
> + sync $testfile
> +
> + echo >> $seqres.full
> + echo "Perform 1 block write at $torn_ex_offset to create torn extent. Extents:">> $seqres.full
> + echo "...">> $seqres.full
> + $DEBUGFS_PROG -R "ex `basename $testfile`" $SCRATCH_DEV |& tail >> $seqres.full
> +
> + _scratch_cycle_mount
> +}
> +
> +_scratch_mkfs >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +testfile=$SCRATCH_MNT/testfile
> +touch $testfile
> +awu_max=$(_get_atomic_write_unit_max $testfile)
> +
> +echo >> $seqres.full
> +echo "# Prepping the file" >> $seqres.full
> +prep
> +
> +torn_aw_offset=$((torn_ex_offset - (torn_ex_offset % awu_max)))
> +
> +echo >> $seqres.full
> +echo "# Performing atomic IO on the torn extent range. Command: " >> $seqres.full
> +echo $XFS_IO_PROG -c "open -fsd $testfile" -c "pwrite -S 0x61 -DA -V1 -b $awu_max $torn_aw_offset $awu_max" >> $seqres.full
> +$XFS_IO_PROG -c "open -fsd $testfile" -c "pwrite -S 0x61 -DA -V1 -b $awu_max $torn_aw_offset $awu_max" >> $seqres.full
> +
> +echo >> $seqres.full
> +echo "Extent state after atomic write:">> $seqres.full
> +echo "...">> $seqres.full
> +$DEBUGFS_PROG -R "ex `basename $testfile`" $SCRATCH_DEV |& tail >> $seqres.full
> +
> +echo >> $seqres.full
> +echo "# Checking data integrity" >> $seqres.full
> +
> +# create a dummy file with expected data
> +$XFS_IO_PROG -fc "pwrite -S 0x61 -b $awu_max 0 $awu_max" $testfile.exp >> /dev/null
> +expected_data=$(od -An -t x1 -j 0 -N $awu_max $testfile.exp)
> +
> +# We ensure that the data after atomic writes should match the expected data
> +actual_data=$(od -An -t x1 -j $torn_aw_offset -N $awu_max $testfile)
> +if [[ "$actual_data" != "$expected_data" ]]
> +then
> + echo "Checksum match failed at off: $torn_aw_offset size: $awu_max"
> + echo
> + echo "Expected: "
> + echo "$expected_data"
> + echo
> + echo "Actual contents: "
> + echo "$actual_data"
> +
> + _fail
> +fi
> +
> +echo -n "Data verification at offset $torn_aw_offset suceeded!" >> $seqres.full
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/ext4/063.out b/tests/ext4/063.out
> new file mode 100644
> index 00000000..de35fc52
> --- /dev/null
> +++ b/tests/ext4/063.out
> @@ -0,0 +1,2 @@
> +QA output created by 063
> +Silence is golden
> --
> 2.49.0
>
>
