On Sat, Jul 12, 2025 at 07:42:53PM +0530, Ojaswin Mujoo wrote:
> From: "Ritesh Harjani (IBM)" <ritesh.list@xxxxxxxxx>
>
> Brute force all possible blocksize clustersize combination on a bigalloc
> filesystem for stressing atomic write using fio data crc verifier. We run
> multiple threads in parallel with each job writing to its own file. The
> parallel jobs running on a constrained filesystem size ensure that we stress
> the ext4 allocator to allocate contiguous extents.
>
> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@xxxxxxxxx>
> Signed-off-by: Ojaswin Mujoo <ojaswin@xxxxxxxxxxxxx>
> ---
> tests/ext4/062 | 176 +++++++++++++++++++++++++++++++++++++++++++++
> tests/ext4/062.out | 2 +
> 2 files changed, 178 insertions(+)
> create mode 100755 tests/ext4/062
> create mode 100644 tests/ext4/062.out
>
> diff --git a/tests/ext4/062 b/tests/ext4/062
> new file mode 100755
> index 00000000..85b82f97
> --- /dev/null
> +++ b/tests/ext4/062
> @@ -0,0 +1,176 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2025 IBM Corporation. All Rights Reserved.
> +#
> +# FS QA Test 061
> +#
> +# Brute force all possible blocksize clustersize combination on a bigalloc
> +# filesystem for stressing atomic write using fio data crc verifier. We run
> +# nproc * $LOAD_FACTOR threads in parallel writing to a single
> +# $SCRATCH_MNT/test-file. We also create 8 such parallel jobs to run on
> +# a constrained filesystem size to stress the ext4 allocator to allocate
> +# contiguous extents.
Looks ok to me,
Reviewed-by: "Darrick J. Wong" <djwong@xxxxxxxxxx>
--D
> +#
> +
> +. ./common/preamble
> +. ./common/atomicwrites
> +
> +_begin_fstest auto rw stress atomicwrites
> +
> +_require_scratch_write_atomic
> +_require_aiodio
> +
> +FSSIZE=$((360*1024*1024))
> +FIO_LOAD=$(($(nproc) * LOAD_FACTOR))
> +fiobsize=4096
> +
> +# Calculate fsblocksize as per bdev atomic write units.
> +bdev_awu_min=$(_get_atomic_write_unit_min $SCRATCH_DEV)
> +bdev_awu_max=$(_get_atomic_write_unit_max $SCRATCH_DEV)
> +fsblocksize=$(_max 4096 "$bdev_awu_min")
> +
> +function create_fio_configs()
> +{
> + create_fio_aw_config
> + create_fio_verify_config
> +}
> +
> +function create_fio_verify_config()
> +{
> +cat >$fio_verify_config <<EOF
> + [global]
> + direct=1
> + ioengine=libaio
> + rw=randwrite
> + bs=$fiobsize
> + fallocate=truncate
> + size=$((FSSIZE / 12))
> + iodepth=$FIO_LOAD
> + numjobs=$FIO_LOAD
> + group_reporting=1
> + atomic=1
> +
> + verify_only=1
> + verify_state_save=0
> + verify=crc32c
> + verify_fatal=1
> + verify_write_sequence=0
> +
> + [verify-job1]
> + filename=$SCRATCH_MNT/testfile-job1
> +
> + [verify-job2]
> + filename=$SCRATCH_MNT/testfile-job2
> +
> + [verify-job3]
> + filename=$SCRATCH_MNT/testfile-job3
> +
> + [verify-job4]
> + filename=$SCRATCH_MNT/testfile-job4
> +
> + [verify-job5]
> + filename=$SCRATCH_MNT/testfile-job5
> +
> + [verify-job6]
> + filename=$SCRATCH_MNT/testfile-job6
> +
> + [verify-job7]
> + filename=$SCRATCH_MNT/testfile-job7
> +
> + [verify-job8]
> + filename=$SCRATCH_MNT/testfile-job8
> +
> +EOF
> +}
> +
> +function create_fio_aw_config()
> +{
> +cat >$fio_aw_config <<EOF
> + [global]
> + direct=1
> + ioengine=libaio
> + rw=randwrite
> + bs=$fiobsize
> + fallocate=truncate
> + size=$((FSSIZE / 12))
> + iodepth=$FIO_LOAD
> + numjobs=$FIO_LOAD
> + group_reporting=1
> + atomic=1
> +
> + verify_state_save=0
> + verify=crc32c
> + do_verify=0
> +
> + [write-job1]
> + filename=$SCRATCH_MNT/testfile-job1
> +
> + [write-job2]
> + filename=$SCRATCH_MNT/testfile-job2
> +
> + [write-job3]
> + filename=$SCRATCH_MNT/testfile-job3
> +
> + [write-job4]
> + filename=$SCRATCH_MNT/testfile-job4
> +
> + [write-job5]
> + filename=$SCRATCH_MNT/testfile-job5
> +
> + [write-job6]
> + filename=$SCRATCH_MNT/testfile-job6
> +
> + [write-job7]
> + filename=$SCRATCH_MNT/testfile-job7
> +
> + [write-job8]
> + filename=$SCRATCH_MNT/testfile-job8
> +
> +EOF
> +}
> +
> +# Let's create a sample fio config to check whether fio supports all options.
> +fio_aw_config=$tmp.aw.fio
> +fio_verify_config=$tmp.verify.fio
> +fio_out=$tmp.fio.out
> +
> +create_fio_configs
> +_require_fio $fio_aw_config
> +
> +for ((fsblocksize=$fsblocksize; fsblocksize <= $(_get_page_size); fsblocksize = $fsblocksize << 1)); do
> + # cluster sizes above 16 x blocksize are experimental so avoid them
> + # Also, cap cluster size at 128kb to keep it reasonable for large
> + # blocks size cases.
> + fs_max_clustersize=$(_min $((16 * fsblocksize)) "$bdev_awu_max" $((128 * 1024)))
> +
> + for ((fsclustersize=$fsblocksize; fsclustersize <= $fs_max_clustersize; fsclustersize = $fsclustersize << 1)); do
> + for ((fiobsize = $fsblocksize; fiobsize <= $fsclustersize; fiobsize = $fiobsize << 1)); do
> + MKFS_OPTIONS="-O bigalloc -b $fsblocksize -C $fsclustersize"
> + _scratch_mkfs_sized "$FSSIZE" >> $seqres.full 2>&1 || continue
> + if _try_scratch_mount >> $seqres.full 2>&1; then
> + echo "== FIO test for fsblocksize=$fsblocksize fsclustersize=$fsclustersize fiobsize=$fiobsize ==" >> $seqres.full
> +
> + touch $SCRATCH_MNT/f1
> + create_fio_configs
> +
> + cat $fio_aw_config >> $seqres.full
> + cat $fio_verify_config >> $seqres.full
> +
> + $FIO_PROG $fio_aw_config >> $seqres.full
> + ret1=$?
> +
> + $FIO_PROG $fio_verify_config >> $seqres.full
> + ret2=$?
> +
> + _scratch_unmount
> +
> + [[ $ret1 -eq 0 && $ret2 -eq 0 ]] || _fail "fio with atomic write failed"
> + fi
> + done
> + done
> +done
> +
> +# success, all done
> +echo Silence is golden
> +status=0
> +exit
> diff --git a/tests/ext4/062.out b/tests/ext4/062.out
> new file mode 100644
> index 00000000..a1578f48
> --- /dev/null
> +++ b/tests/ext4/062.out
> @@ -0,0 +1,2 @@
> +QA output created by 062
> +Silence is golden
> --
> 2.49.0
>
>
