From: Wright Feng <wright.feng@xxxxxxxxxxx>
hostapd & wpa_supplicant userspace daemons exposes an AP mode specific
config file parameter "ap_isolate" to the user, which is used to control
low-level bridging of frames between the stations associated in the BSS.
In driver, handle this user setting in the newly defined cfg80211_ops
function brcmf_cfg80211_change_bss() by enabling "ap_isolate" IOVAR in
the firmware.
In AP mode, the "ap_isolate" value from the cfg80211 layer represents,
0 = allow low-level bridging of frames between associated stations
1 = restrict low-level bridging of frames to isolate associated stations
-1 = do not change existing setting
Signed-off-by: Wright Feng <wright.feng@xxxxxxxxxxx>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@xxxxxxxxxxxx>
[arend: indicate ap_isolate support in struct wiphy::bss_param_support]
Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 8af402555b5e..8afaffe31031 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5958,6 +5958,26 @@ static int brcmf_cfg80211_del_pmk(struct wiphy *wiphy, struct net_device *dev,
return brcmf_set_pmk(ifp, NULL, 0);
}
+static int brcmf_cfg80211_change_bss(struct wiphy *wiphy, struct net_device *dev,
+ struct bss_parameters *params)
+{
+ struct brcmf_if *ifp = netdev_priv(dev);
+ int ret = 0;
+
+ /* In AP mode, the "ap_isolate" value represents
+ * 0 = allow low-level bridging of frames between associated stations
+ * 1 = restrict low-level bridging of frames to isolate associated stations
+ * -1 = do not change existing setting
+ */
+ if (params->ap_isolate >= 0) {
+ ret = brcmf_fil_iovar_int_set(ifp, "ap_isolate", params->ap_isolate);
+ if (ret < 0)
+ brcmf_err("ap_isolate iovar failed: ret=%d\n", ret);
+ }
+
+ return ret;
+}
+
static struct cfg80211_ops brcmf_cfg80211_ops = {
.add_virtual_intf = brcmf_cfg80211_add_iface,
.del_virtual_intf = brcmf_cfg80211_del_iface,
@@ -6005,6 +6025,7 @@ static struct cfg80211_ops brcmf_cfg80211_ops = {
.update_connect_params = brcmf_cfg80211_update_conn_params,
.set_pmk = brcmf_cfg80211_set_pmk,
.del_pmk = brcmf_cfg80211_del_pmk,
+ .change_bss = brcmf_cfg80211_change_bss,
};
struct cfg80211_ops *brcmf_cfg80211_get_ops(struct brcmf_mp_device *settings)
@@ -7659,6 +7680,8 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
BIT(NL80211_BSS_SELECT_ATTR_BAND_PREF) |
BIT(NL80211_BSS_SELECT_ATTR_RSSI_ADJUST);
+ wiphy->bss_param_support = WIPHY_BSS_PARAM_AP_ISOLATE;
+
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
WIPHY_FLAG_PS_ON_BY_DEFAULT |
WIPHY_FLAG_HAVE_AP_SME |
--
2.43.5
