On Tue, 26 Aug 2025 17:56:56 -0700, Rosen Penev wrote: > The ath9k driver has various pin GPIO numbers for different chipsets > which are not always correct for every device. > > Add bindings to specify the correct number and if it should be > active-high. > > Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx> > --- > .../bindings/net/wireless/qca,ath9k.yaml | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:92.15-25: Warning (reg_format): /example-2/ahb/wifi@180c0000/led:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (unit_address_vs_reg): /example-2/ahb/wifi@180c0000/led: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (avoid_default_addr_size): /example-2/ahb/wifi@180c0000/led: Relying on default #address-cells value Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dts:91.17-94.15: Warning (avoid_default_addr_size): /example-2/ahb/wifi@180c0000/led: Relying on default #size-cells value Documentation/devicetree/bindings/net/wireless/qca,ath9k.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250827005658.3464-2-rosenp@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
