[PATCH rtw-next v3 04/11] wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_post_init() for RTL8852CU

[Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>]

The registers used in rtw89_usb_ops_mac_post_init() are located at
different offsets in RTL8852CU, so move them to struct rtw89_usb_info,
which is filled in each chip's driver.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
v2:
 - No change, messed up sending v1.

v3:
 - Move the registers to struct rtw89_usb_info instead of extending
   rtw89_usb_ops_mac_post_init().
---
 drivers/net/wireless/realtek/rtw89/rtw8851bu.c | 3 +++
 drivers/net/wireless/realtek/rtw89/rtw8852bu.c | 3 +++
 drivers/net/wireless/realtek/rtw89/usb.c       | 7 ++++---
 drivers/net/wireless/realtek/rtw89/usb.h       | 3 +++
 4 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851bu.c b/drivers/net/wireless/realtek/rtw89/rtw8851bu.c
index 3fcab1d94208..bd634722411d 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851bu.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851bu.c
@@ -12,6 +12,9 @@ static const struct rtw89_usb_info rtw8851b_usb_info = {
 	.usb_host_request_2		= R_AX_USB_HOST_REQUEST_2,
 	.usb_wlan0_1			= R_AX_USB_WLAN0_1,
 	.hci_func_en			= R_AX_HCI_FUNC_EN,
+	.usb3_mac_npi_config_intf_0	= R_AX_USB3_MAC_NPI_CONFIG_INTF_0,
+	.usb_endpoint_0			= R_AX_USB_ENDPOINT_0,
+	.usb_endpoint_2			= R_AX_USB_ENDPOINT_2,
 	.bulkout_id = {
 		[RTW89_DMA_ACH0] = 3,
 		[RTW89_DMA_ACH1] = 4,
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852bu.c b/drivers/net/wireless/realtek/rtw89/rtw8852bu.c
index 5c91e123672a..8cee94874134 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852bu.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852bu.c
@@ -12,6 +12,9 @@ static const struct rtw89_usb_info rtw8852b_usb_info = {
 	.usb_host_request_2		= R_AX_USB_HOST_REQUEST_2,
 	.usb_wlan0_1			= R_AX_USB_WLAN0_1,
 	.hci_func_en			= R_AX_HCI_FUNC_EN,
+	.usb3_mac_npi_config_intf_0	= R_AX_USB3_MAC_NPI_CONFIG_INTF_0,
+	.usb_endpoint_0			= R_AX_USB_ENDPOINT_0,
+	.usb_endpoint_2			= R_AX_USB_ENDPOINT_2,
 	.bulkout_id = {
 		[RTW89_DMA_ACH0] = 3,
 		[RTW89_DMA_ACH1] = 4,
diff --git a/drivers/net/wireless/realtek/rtw89/usb.c b/drivers/net/wireless/realtek/rtw89/usb.c
index a3769b91bc1f..a165d4d708df 100644
--- a/drivers/net/wireless/realtek/rtw89/usb.c
+++ b/drivers/net/wireless/realtek/rtw89/usb.c
@@ -708,10 +708,11 @@ static int rtw89_usb_ops_mac_pre_deinit(struct rtw89_dev *rtwdev)
 static int rtw89_usb_ops_mac_post_init(struct rtw89_dev *rtwdev)
 {
 	struct rtw89_usb *rtwusb = rtw89_usb_priv(rtwdev);
+	const struct rtw89_usb_info *info = rtwusb->info;
 	enum usb_device_speed speed;
 	u32 ep;
 
-	rtw89_write32_clr(rtwdev, R_AX_USB3_MAC_NPI_CONFIG_INTF_0,
+	rtw89_write32_clr(rtwdev, info->usb3_mac_npi_config_intf_0,
 			  B_AX_SSPHY_LFPS_FILTER);
 
 	speed = rtwusb->udev->speed;
@@ -727,9 +728,9 @@ static int rtw89_usb_ops_mac_post_init(struct rtw89_dev *rtwdev)
 		if (ep == 8)
 			continue;
 
-		rtw89_write8_mask(rtwdev, R_AX_USB_ENDPOINT_0,
+		rtw89_write8_mask(rtwdev, info->usb_endpoint_0,
 				  B_AX_EP_IDX, ep);
-		rtw89_write8(rtwdev, R_AX_USB_ENDPOINT_2 + 1, NUMP);
+		rtw89_write8(rtwdev, info->usb_endpoint_2 + 1, NUMP);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/realtek/rtw89/usb.h b/drivers/net/wireless/realtek/rtw89/usb.h
index be3a9fbe42c0..32cdbf5128e4 100644
--- a/drivers/net/wireless/realtek/rtw89/usb.h
+++ b/drivers/net/wireless/realtek/rtw89/usb.h
@@ -24,6 +24,9 @@ struct rtw89_usb_info {
 	u32 usb_host_request_2;
 	u32 usb_wlan0_1;
 	u32 hci_func_en;
+	u32 usb3_mac_npi_config_intf_0;
+	u32 usb_endpoint_0;
+	u32 usb_endpoint_2;
 	u8 bulkout_id[RTW89_DMA_CH_NUM];
 };
 
-- 
2.50.1