Driver definitions of the data structures expected by the Device
firmware when the driver sends data as part of the control
commands to the device.
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@xxxxxxxxxxxx>
---
.../wireless/infineon/inffmac/fwil_types.h | 1311 +++++++++++++++++
1 file changed, 1311 insertions(+)
create mode 100644 drivers/net/wireless/infineon/inffmac/fwil_types.h
diff --git a/drivers/net/wireless/infineon/inffmac/fwil_types.h b/drivers/net/wireless/infineon/inffmac/fwil_types.h
new file mode 100644
index 000000000000..335bc86334e6
--- /dev/null
+++ b/drivers/net/wireless/infineon/inffmac/fwil_types.h
@@ -0,0 +1,1311 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2012 Broadcom Corporation
+ *
+ * Copyright (c) 2025, Infineon Technologies AG, or an affiliate of Infineon Technologies AG.
+ * All rights reserved.
+ */
+
+#ifndef INFF_FWIL_TYPES_H
+#define INFF_FWIL_TYPES_H
+
+#include <linux/if_ether.h>
+
+#define INFF_FIL_ACTION_FRAME_SIZE 1800
+
+#define INFF_AF_PARAM_V2_FW_MAJOR 13
+#define INFF_AF_PARAM_V2_FW_MINOR 2
+
+#define INFF_AUTH_STATUS_V2_FW_MAJOR 13
+#define INFF_AUTH_STATUS_V2_FW_MINOR 3
+
+#define INFF_BSS_INFO_VERSION 109 /* curr ver of inff_bss_info_le struct */
+#define INFF_BSS_RSSI_ON_CHANNEL 0x0004
+
+#define INFF_STA_INF 0x00000001 /* Running a Infineon driver */
+#define INFF_STA_WME 0x00000002 /* WMM association */
+#define INFF_STA_NONERP 0x00000004 /* No ERP */
+#define INFF_STA_AUTHE 0x00000008 /* Authenticated */
+#define INFF_STA_ASSOC 0x00000010 /* Associated */
+#define INFF_STA_AUTHO 0x00000020 /* Authorized */
+#define INFF_STA_WDS 0x00000040 /* Wireless Distribution System */
+#define INFF_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */
+#define INFF_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */
+#define INFF_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */
+#define INFF_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */
+#define INFF_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */
+#define INFF_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */
+#define INFF_STA_N_CAP 0x00002000 /* STA 802.11n capable */
+#define INFF_STA_SCBSTATS 0x00004000 /* Per STA debug stats */
+#define INFF_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */
+#define INFF_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */
+#define INFF_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */
+#define INFF_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */
+#define INFF_STA_RIFS_CAP 0x00080000 /* rifs enabled */
+#define INFF_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */
+#define INFF_STA_WPS 0x00200000 /* WPS state */
+#define INFF_STA_DWDS_CAP 0x01000000 /* DWDS CAP */
+#define INFF_STA_DWDS 0x02000000 /* DWDS active */
+
+/* size of inff_scan_params not including variable length array */
+#define INFF_SCAN_PARAMS_FIXED_SIZE 64
+#define INFF_SCAN_PARAMS_V2_FIXED_SIZE 72
+
+/* version of inff_scan_params structure */
+#define INFF_SCAN_PARAMS_VERSION_V2 2
+
+/* masks for channel and ssid count */
+#define INFF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define INFF_SCAN_PARAMS_NSSID_SHIFT 16
+
+/* scan type definitions */
+#define INFF_SCANTYPE_DEFAULT 0xFF
+#define INFF_SCANTYPE_ACTIVE 0
+#define INFF_SCANTYPE_PASSIVE 1
+
+#define INFF_WSEC_MAX_PSK_LEN 32
+#define INFF_WSEC_PMK_LEN_SUITEB_192 48
+#define INFF_WSEC_MAX_PMK_LEN 64 /* SUITE-B-192's PMK is 48 bytes */
+#define INFF_WSEC_PASSPHRASE BIT(0)
+
+#define INFF_WSEC_MAX_SAE_PASSWORD_LEN 128
+
+/* primary (ie tx) key */
+#define INFF_PRIMARY_KEY BIT(1)
+#define DOT11_BSSTYPE_ANY 2
+#define INFF_ESCAN_REQ_VERSION 1
+#define INFF_ESCAN_REQ_VERSION_V2 2
+
+#define INFF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
+
+/* OBSS Coex Auto/On/Off */
+#define INFF_OBSS_COEX_AUTO (-1)
+#define INFF_OBSS_COEX_OFF 0
+#define INFF_OBSS_COEX_ON 1
+
+/* WOWL bits */
+/* Wakeup on Magic packet: */
+#define INFF_WOWL_MAGIC BIT(0)
+/* Wakeup on Netpattern */
+#define INFF_WOWL_NET BIT(1)
+/* Wakeup on loss-of-link due to Disassoc/Deauth: */
+#define INFF_WOWL_DIS BIT(2)
+/* Wakeup on retrograde TSF: */
+#define INFF_WOWL_RETR BIT(3)
+/* Wakeup on loss of beacon: */
+#define INFF_WOWL_BCN BIT(4)
+/* Wakeup after test: */
+#define INFF_WOWL_TST BIT(5)
+/* Wakeup after PTK refresh: */
+#define INFF_WOWL_M1 BIT(6)
+/* Wakeup after receipt of EAP-Identity Req: */
+#define INFF_WOWL_EAPID BIT(7)
+/* Wakeind via PME(0) or GPIO(1): */
+#define INFF_WOWL_PME_GPIO BIT(8)
+/* need tkip phase 1 key to be updated by the driver: */
+#define INFF_WOWL_NEEDTKIP1 BIT(9)
+/* enable wakeup if GTK fails: */
+#define INFF_WOWL_GTK_FAILURE BIT(10)
+/* support extended magic packets: */
+#define INFF_WOWL_EXTMAGPAT BIT(11)
+/* support ARP/NS/keepalive offloading: */
+#define INFF_WOWL_ARPOFFLOAD BIT(12)
+/* read protocol version for EAPOL frames: */
+#define INFF_WOWL_WPA2 BIT(13)
+/* If the bit is set, use key rotaton: */
+#define INFF_WOWL_KEYROT BIT(14)
+/* If the bit is set, frm received was bcast frame: */
+#define INFF_WOWL_BCAST BIT(15)
+/* If the bit is set, scan offload is enabled: */
+#define INFF_WOWL_SCANOL BIT(16)
+/* Wakeup on tcpkeep alive timeout: */
+#define INFF_WOWL_TCPKEEP_TIME BIT(17)
+/* Wakeup on mDNS Conflict Resolution: */
+#define INFF_WOWL_MDNS_CONFLICT BIT(18)
+/* Wakeup on mDNS Service Connect: */
+#define INFF_WOWL_MDNS_SERVICE BIT(19)
+/* tcp keepalive got data: */
+#define INFF_WOWL_TCPKEEP_DATA BIT(20)
+/* Firmware died in wowl mode: */
+#define INFF_WOWL_FW_HALT BIT(21)
+/* Enable detection of radio button changes: */
+#define INFF_WOWL_ENAB_HWRADIO BIT(22)
+/* Offloads detected MIC failure(s): */
+#define INFF_WOWL_MIC_FAIL BIT(23)
+/* Wakeup in Unassociated state (Net/Magic Pattern): */
+#define INFF_WOWL_UNASSOC BIT(24)
+/* Wakeup if received matched secured pattern: */
+#define INFF_WOWL_SECURE BIT(25)
+/* Wakeup on finding preferred network */
+#define INFF_WOWL_PFN_FOUND BIT(27)
+/* Wakeup on receiving pairwise key EAP packets: */
+#define WIPHY_WOWL_EAP_PK BIT(28)
+/* Link Down indication in WoWL mode: */
+#define INFF_WOWL_LINKDOWN BIT(31)
+
+#define INFF_WOWL_MAXPATTERNS 16
+#define INFF_WOWL_MAXPATTERNSIZE 128
+
+/* IPV4 address length */
+#define INFF_IPV4_ADDR_LEN 4
+/* IPV6 address length */
+#define INFF_IPV6_ADDR_LEN 16
+
+enum {
+ INFF_UNICAST_FILTER_NUM = 0,
+ INFF_BROADCAST_FILTER_NUM,
+ INFF_MULTICAST4_FILTER_NUM,
+ INFF_MULTICAST6_FILTER_NUM,
+ INFF_MDNS_FILTER_NUM,
+ INFF_ARP_FILTER_NUM,
+ INFF_BROADCAST_ARP_FILTER_NUM,
+ MAX_PKT_FILTER_COUNT
+};
+
+#define MAX_PKTFILTER_PATTERN_SIZE 16
+#define MAX_PKTFILTER_PATTERN_FILL_SIZE (MAX_PKTFILTER_PATTERN_SIZE * 2)
+
+#define INFF_COUNTRY_BUF_SZ 4
+#define INFF_ANT_MAX 4
+
+#define INFF_MAX_ASSOCLIST 128
+
+#define INFF_TXBF_SU_BFE_CAP BIT(0)
+#define INFF_TXBF_MU_BFE_CAP BIT(1)
+#define INFF_TXBF_SU_BFR_CAP BIT(0)
+#define INFF_TXBF_MU_BFR_CAP BIT(1)
+
+#define INFF_MAXPMKID 16 /* max # PMKID cache entries */
+#define INFF_NUMCHANNELS 64
+
+#define INFF_PFN_MACADDR_CFG_VER 1
+#define INFF_PFN_MAC_OUI_ONLY BIT(0)
+#define INFF_PFN_SET_MAC_UNASSOC BIT(1)
+
+#define INFF_MCSSET_LEN 16
+
+#define INFF_RSN_KCK_LENGTH 16
+#define INFF_RSN_KEK_LENGTH 16
+#define INFF_RSN_REPLAY_LEN 8
+
+#define INFF_MFP_NONE 0
+#define INFF_MFP_CAPABLE 1
+#define INFF_MFP_REQUIRED 2
+
+#define INFF_VHT_CAP_MCS_MAP_NSS_MAX 8
+
+#define INFF_HE_CAP_MCS_MAP_NSS_MAX 8
+
+#define INFF_PMKSA_VER_2 2
+#define INFF_PMKSA_VER_3 3
+#define INFF_PMKSA_NO_EXPIRY 0xffffffff
+
+#define INFF_EXTAUTH_START 1
+#define INFF_EXTAUTH_ABORT 2
+#define INFF_EXTAUTH_FAIL 3
+#define INFF_EXTAUTH_SUCCESS 4
+
+/* mchan configuration (ap timeslot : sta timeslot)*/
+#define INFF_MCHAN_CONF_DEFAULT 0 /* mchan_algo=2 (25ms:25ms) */
+#define INFF_MCHAN_CONF_VEDIO 1 /* mchan_algo=5 (29ms:21ms) */
+#define INFF_MCHAN_CONF_AUDIO 2 /* mchan_algo=1, mchan_bw=32 (68ms:32ms) */
+/* mchan algo in dongle */
+#define INFF_MCHAN_DEFAULT_ALGO 0
+#define INFF_MCHAN_BANDWIDTH_ALGO 1
+#define INFF_MCHAN_SI_ALGO 2
+#define INFF_MCHAN_DYNAMIC_BW_ALGO 3
+#define INFF_MCHAN_ALTERNATE_SWITCHING 4
+#define INFF_MCHAN_ASYMMETRIC_SI_ALGO 5
+#define INFF_MCHAN_BANDWIDTH_VAL 32
+
+/* MAX_CHUNK_LEN is the maximum length for data passing to firmware in each
+ * ioctl. It is relatively small because firmware has small maximum size input
+ * playload restriction for ioctls.
+ */
+#define MAX_CHUNK_LEN 1400
+
+#define DLOAD_HANDLER_VER 1 /* Downloader version */
+#define DLOAD_FLAG_VER_MASK 0xf000 /* Downloader version mask */
+#define DLOAD_FLAG_VER_SHIFT 12 /* Downloader version shift */
+
+#define DL_BEGIN 0x0002
+#define DL_END 0x0004
+
+#define DL_TYPE_CLM 2
+
+#define MAX_RSSI_LEVELS 8
+#define WL_RSSI_EVENT_VERSION_OLD 0
+#define WL_RSSI_EVENT_VERSION_NEW 1
+
+/* Offloads profile configuration version */
+#define INFF_OFFLOAD_CFG_VER_1 1
+
+extern unsigned int inff_offload_prof;
+extern unsigned int inff_offload_feat;
+
+/* join preference types for join_pref iovar */
+enum inff_join_pref_types {
+ INFF_JOIN_PREF_RSSI = 1,
+ INFF_JOIN_PREF_WPA,
+ INFF_JOIN_PREF_BAND,
+ INFF_JOIN_PREF_RSSI_DELTA,
+};
+
+enum inff_fil_p2p_if_types {
+ INFF_FIL_P2P_IF_CLIENT,
+ INFF_FIL_P2P_IF_GO,
+ INFF_FIL_P2P_IF_DYNBCN_GO,
+ INFF_FIL_P2P_IF_DEV,
+};
+
+enum inff_wowl_pattern_type {
+ INFF_WOWL_PATTERN_TYPE_BITMAP = 0,
+ INFF_WOWL_PATTERN_TYPE_ARP,
+ INFF_WOWL_PATTERN_TYPE_NA
+};
+
+struct inff_fil_p2p_if_le {
+ u8 addr[ETH_ALEN];
+ __le16 type;
+ __le16 chspec;
+};
+
+struct inff_fil_chan_info_le {
+ __le32 hw_channel;
+ __le32 target_channel;
+ __le32 scan_channel;
+};
+
+struct inff_fil_action_frame_le {
+ u8 da[ETH_ALEN];
+ __le16 len;
+ __le32 packet_id;
+ u8 data[INFF_FIL_ACTION_FRAME_SIZE];
+};
+
+struct inff_fil_af_params_le {
+ __le32 channel;
+ __le32 dwell_time;
+ u8 bssid[ETH_ALEN];
+ u8 pad[2];
+ struct inff_fil_action_frame_le action_frame;
+};
+
+struct inff_fil_af_params_v2_le {
+ __le16 version;
+ __le16 length;
+ __le32 channel;
+ __le32 dwell_time;
+ u8 bssid[ETH_ALEN];
+ u8 band;
+ u8 pad[1];
+ struct inff_fil_action_frame_le action_frame;
+};
+
+struct inff_fil_bss_enable_le {
+ __le32 bsscfgidx;
+ __le32 enable;
+};
+
+struct inff_fil_bwcap_le {
+ __le32 band;
+ __le32 bw_cap;
+};
+
+/**
+ * struct tdls_iovar - common structure for tdls iovars.
+ *
+ * @ea: ether address of peer station.
+ * @mode: mode value depending on specific tdls iovar.
+ * @chanspec: channel specification.
+ * @pad: unused (for future use).
+ */
+struct inff_tdls_iovar_le {
+ u8 ea[ETH_ALEN]; /* Station address */
+ u8 mode; /* mode: depends on iovar */
+ __le16 chanspec;
+ __le32 pad; /* future */
+};
+
+enum inff_tdls_manual_ep_ops {
+ INFF_TDLS_MANUAL_EP_CREATE = 1,
+ INFF_TDLS_MANUAL_EP_DELETE = 3,
+ INFF_TDLS_MANUAL_EP_DISCOVERY = 6
+};
+
+/* Pattern matching filter. Specifies an offset within received packets to
+ * start matching, the pattern to match, the size of the pattern, and a bitmask
+ * that indicates which bits within the pattern should be matched.
+ */
+struct inff_pkt_filter_pattern_le {
+ /*
+ * Offset within received packet to start pattern matching.
+ * Offset '0' is the first byte of the ethernet header.
+ */
+ __le32 offset;
+ /* Size of the pattern. Bitmask must be the same size.*/
+ __le32 size_bytes;
+ /*
+ * Variable length mask and pattern data. mask starts at offset 0.
+ * Pattern immediately follows mask.
+ */
+ u8 mask_and_pattern[MAX_PKTFILTER_PATTERN_FILL_SIZE];
+};
+
+/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
+struct inff_pkt_filter_le {
+ __le32 id; /* Unique filter id, specified by app. */
+ __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
+ __le32 negate_match; /* Negate the result of filter matches */
+ union { /* Filter definitions */
+ struct inff_pkt_filter_pattern_le pattern; /* Filter pattern */
+ } u;
+};
+
+/* IOVAR "pkt_filter_enable" parameter. */
+struct inff_pkt_filter_enable_le {
+ __le32 id; /* Unique filter id */
+ __le32 enable; /* Enable/disable bool */
+};
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in struct inff_scan_results)
+ */
+struct inff_bss_info_le {
+ __le32 version; /* version field */
+ __le32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ u8 BSSID[ETH_ALEN];
+ __le16 beacon_period; /* units are Kusec */
+ __le16 capability; /* Capability information */
+ u8 SSID_len;
+ u8 SSID[32];
+ struct {
+ __le32 count; /* # rates in this set */
+ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ __le16 chanspec; /* chanspec for bss */
+ __le16 atim_window; /* units are Kusec */
+ u8 dtim_period; /* DTIM period */
+ __le16 RSSI; /* receive signal strength (in dBm) */
+ s8 phy_noise; /* noise (in dBm) */
+
+ u8 n_cap; /* BSS is 802.11N Capable */
+ /* 802.11N BSS Capabilities (based on HT_CAP_*): */
+ __le32 nbss_cap;
+ u8 ctl_ch; /* 802.11N BSS control channel number */
+ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
+ u8 flags; /* flags */
+ u8 reserved[3]; /* Reserved for expansion of BSS properties */
+ u8 basic_mcs[INFF_MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ __le16 ie_offset; /* offset at which IEs start, from beginning */
+ __le32 ie_length; /* byte length of Information Elements */
+ __le16 SNR; /* average SNR of during frame reception */
+ /* Add new fields here */
+ /* variable length Information Elements */
+};
+
+struct inff_rateset_le {
+ /* # rates in this set */
+ __le32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[INFF_MAXRATES_IN_SET];
+};
+
+struct inff_ssid_le {
+ __le32 SSID_len;
+ unsigned char SSID[IEEE80211_MAX_SSID_LEN];
+};
+
+struct inff_scan_params_le {
+ struct inff_ssid_le ssid_le; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 scan_type; /* flags, 0 use default */
+ __le32 nprobes; /* -1 use default, number of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the
+ * home channel between channel scans
+ */
+ __le32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in
+ * channel_list, 0 means default (use all
+ * available channels)
+ *
+ * high half is entries in struct inff_ssid
+ * array that follows channel_list, aligned for
+ * s32 (4 bytes) meaning an odd channel count
+ * implies a 2-byte pad between end of
+ * channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the
+ * fixed parameter portion is assumed, otherwise
+ * ssid in the fixed portion is ignored
+ */
+ union {
+ __le16 padding; /* Reserve space for at least 1 entry for abort
+ * which uses an on stack inff_scan_params_le
+ */
+ DECLARE_FLEX_ARRAY(__le16, channel_list); /* chanspecs */
+ };
+};
+
+struct inff_scan_params_v2_le {
+ __le16 version; /* structure version */
+ __le16 length; /* structure length */
+ struct inff_ssid_le ssid_le; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 pad;
+ __le32 scan_type; /* flags, 0 use default */
+ __le32 nprobes; /* -1 use default, number of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the
+ * home channel between channel scans
+ */
+ __le32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in
+ * channel_list, 0 means default (use all
+ * available channels)
+ *
+ * high half is entries in struct inff_ssid
+ * array that follows channel_list, aligned for
+ * s32 (4 bytes) meaning an odd channel count
+ * implies a 2-byte pad between end of
+ * channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the
+ * fixed parameter portion is assumed, otherwise
+ * ssid in the fixed portion is ignored
+ */
+ union {
+ __le16 padding; /* Reserve space for at least 1 entry for abort
+ * which uses an on stack inff_scan_params_v2_le
+ */
+ DECLARE_FLEX_ARRAY(__le16, channel_list); /* chanspecs */
+ };
+};
+
+struct inff_scan_results {
+ u32 buflen;
+ u32 version;
+ u32 count;
+ struct inff_bss_info_le bss_info_le[];
+};
+
+struct inff_escan_params_le {
+ __le32 version;
+ __le16 action;
+ __le16 sync_id;
+ union {
+ struct inff_scan_params_le params_le;
+ struct inff_scan_params_v2_le params_v2_le;
+ };
+};
+
+struct inff_escan_result_le {
+ __le32 buflen;
+ __le32 version;
+ __le16 sync_id;
+ __le16 bss_count;
+ struct inff_bss_info_le bss_info_le;
+};
+
+#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct inff_escan_result_le) - \
+ sizeof(struct inff_bss_info_le))
+
+/* used for association with a specific BSSID and chanspec list */
+struct inff_assoc_params_le {
+ /* 00:00:00:00:00:00: broadcast scan */
+ u8 bssid[ETH_ALEN];
+ /* 0: all available channels, otherwise count of chanspecs in
+ * chanspec_list
+ */
+ __le32 chanspec_num;
+ /*
+ * list of chanspecs. Currently, driver only uses 1 chanspec here.
+ * TODO: Conver this into a flexible array to support multiple
+ * chanspecs.
+ */
+ __le16 chanspec_list;
+};
+
+/**
+ * struct join_pref params - parameters for preferred join selection.
+ *
+ * @type: preference type (see enum inff_join_pref_types).
+ * @len: length of bytes following (currently always 2).
+ * @rssi_gain: signal gain for selection (only when @type is RSSI_DELTA).
+ * @band: band to which selection preference applies.
+ * This is used if @type is BAND or RSSI_DELTA.
+ */
+struct inff_join_pref_params {
+ u8 type;
+ u8 len;
+ u8 rssi_gain;
+ u8 band;
+};
+
+/* used for join with or without a specific bssid and channel list */
+struct inff_join_params {
+ struct inff_ssid_le ssid_le;
+ struct inff_assoc_params_le params_le;
+};
+
+/* scan params for extended join */
+struct inff_join_scan_params_le {
+ u8 scan_type; /* 0 use default, active or passive scan */
+ __le32 nprobes; /* -1 use default, nr of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the home
+ * channel between channel scans
+ */
+};
+
+/* extended join params */
+struct inff_ext_join_params_le {
+ struct inff_ssid_le ssid_le; /* {0, ""}: wildcard scan */
+ struct inff_join_scan_params_le scan_le;
+ struct inff_assoc_params_le assoc_le;
+};
+
+struct inff_wsec_key {
+ u32 index; /* key index */
+ u32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ u32 pad_1[18];
+ u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ u32 flags; /* misc flags */
+ u32 pad_2[3];
+ u32 iv_initialized; /* has IV been initialized already? */
+ u32 pad_3;
+ /* Rx IV */
+ struct {
+ u32 hi; /* upper 32 bits of IV */
+ u16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ u32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/*
+ * dongle requires same struct as above but with fields in little endian order
+ */
+struct inff_wsec_key_le {
+ __le32 index; /* key index */
+ __le32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ __le32 pad_1[18];
+ __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ __le32 flags; /* misc flags */
+ __le32 pad_2[3];
+ __le32 iv_initialized; /* has IV been initialized already? */
+ __le32 pad_3;
+ /* Rx IV */
+ struct {
+ __le32 hi; /* upper 32 bits of IV */
+ __le16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ __le32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/**
+ * struct inff_wsec_pmk_le - firmware pmk material.
+ *
+ * @key_len: number of octets in key material.
+ * @flags: key handling qualifiers.
+ * @key: PMK key material.
+ */
+struct inff_wsec_pmk_le {
+ __le16 key_len;
+ __le16 flags;
+ u8 key[INFF_WSEC_MAX_PMK_LEN];
+};
+
+/**
+ * struct inff_wsec_sae_pwd_le - firmware SAE password material.
+ *
+ * @key_len: number of octets in key materials.
+ * @key: SAE password material.
+ */
+struct inff_wsec_sae_pwd_le {
+ __le16 key_len;
+ u8 key[INFF_WSEC_MAX_SAE_PASSWORD_LEN];
+};
+
+/**
+ * struct inff_auth_req_status_le - external auth request and status update
+ *
+ * @flags: flags for external auth status
+ * @peer_mac: peer MAC address
+ * @ssid_len: length of ssid
+ * @ssid: ssid characters
+ */
+struct inff_auth_req_status_le {
+ __le16 flags;
+ u8 peer_mac[ETH_ALEN];
+ __le32 ssid_len;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 pmkid[WLAN_PMKID_LEN];
+};
+
+struct inff_auth_req_status_info_le_v2 {
+ __le16 version;
+ __le16 len;
+ __le16 flags;
+ u8 peer_mac[ETH_ALEN];/* peer mac address */
+ __le32 ssid_len;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 pmkid[WLAN_PMKID_LEN];
+ struct inff_bss_info_le bss_info_le[];
+};
+
+/**
+ * struct inff_mf_params_le - management frame parameters for mgmt_frame iovar
+ *
+ * @version: version of the iovar
+ * @dwell_time: dwell duration in ms
+ * @len: length of frame data
+ * @frame_control: frame control
+ * @channel: channel
+ * @da: peer MAC address
+ * @bssid: BSS network identifier
+ * @packet_id: packet identifier
+ * @data: frame data
+ */
+struct inff_mf_params_le {
+ __le32 version;
+ __le32 dwell_time;
+ __le16 len;
+ __le16 frame_control;
+ __le16 channel;
+ u8 da[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le32 packet_id;
+ u8 data[] __counted_by_le(len);
+};
+
+/* Used to get specific STA parameters */
+struct inff_scb_val_le {
+ __le32 val;
+ u8 ea[ETH_ALEN];
+};
+
+/* channel encoding */
+struct inff_channel_info_le {
+ __le32 hw_channel;
+ __le32 target_channel;
+ __le32 scan_channel;
+};
+
+struct inff_sta_info_le {
+ __le16 ver; /* version of this struct */
+ __le16 len; /* length in bytes of this structure */
+ __le16 cap; /* sta's advertised capabilities */
+ __le32 flags; /* flags defined below */
+ __le32 idle; /* time since data pkt rx'd from sta */
+ u8 ea[ETH_ALEN]; /* Station address */
+ __le32 count; /* # rates in this set */
+ u8 rates[INFF_MAXRATES_IN_SET]; /* rates in 500kbps units */
+ /* w/hi bit set if basic */
+ __le32 in; /* seconds elapsed since associated */
+ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
+
+ /* Fields valid for ver >= 3 */
+ __le32 tx_pkts; /* # of packets transmitted */
+ __le32 tx_failures; /* # of packets failed */
+ __le32 rx_ucast_pkts; /* # of unicast packets received */
+ __le32 rx_mcast_pkts; /* # of multicast packets received */
+ __le32 tx_rate; /* Rate of last successful tx frame */
+ __le32 rx_rate; /* Rate of last successful rx frame */
+ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
+ __le32 rx_decrypt_failures; /* # of packet decrypted failed */
+
+ /* Fields valid for ver >= 4 */
+ __le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */
+ __le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */
+ __le32 tx_mcast_pkts; /* # of mcast pkts txed */
+ __le64 tx_tot_bytes; /* data bytes txed (ucast + mcast) */
+ __le64 rx_tot_bytes; /* data bytes recvd (ucast + mcast) */
+ __le64 tx_ucast_bytes; /* data bytes txed (ucast) */
+ __le64 tx_mcast_bytes; /* # data bytes txed (mcast) */
+ __le64 rx_ucast_bytes; /* data bytes recvd (ucast) */
+ __le64 rx_mcast_bytes; /* data bytes recvd (mcast) */
+ s8 rssi[INFF_ANT_MAX]; /* per antenna rssi */
+ s8 nf[INFF_ANT_MAX]; /* per antenna noise floor */
+ __le16 aid; /* association ID */
+ __le16 ht_capabilities; /* advertised ht caps */
+ __le16 vht_flags; /* converted vht flags */
+ __le32 tx_pkts_retry_cnt; /* # of frames where a retry was
+ * exhausted.
+ */
+ __le32 tx_pkts_retry_exhausted; /* # of user frames where a retry
+ * was exhausted
+ */
+ s8 rx_lastpkt_rssi[INFF_ANT_MAX]; /* Per antenna RSSI of last
+ * received data frame.
+ */
+ /* TX WLAN retry/failure statistics:
+ * Separated for host requested frames and locally generated frames.
+ * Include unicast frame only where the retries/failures can be counted.
+ */
+ __le32 tx_pkts_total; /* # user frames sent successfully */
+ __le32 tx_pkts_retries; /* # user frames retries */
+ __le32 tx_pkts_fw_total; /* # FW generated sent successfully */
+ __le32 tx_pkts_fw_retries; /* # retries for FW generated frames */
+ __le32 tx_pkts_fw_retry_exhausted; /* # FW generated where a retry
+ * was exhausted
+ */
+ __le32 rx_pkts_retried; /* # rx with retry bit set */
+ __le32 tx_rate_fallback; /* lowest fallback TX rate */
+
+ union {
+ struct {
+ struct {
+ /* # rates in this set */
+ __le32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[INFF_MAXRATES_IN_SET];
+ /* supported mcs index bit map */
+ u8 mcs[INFF_MCSSET_LEN];
+ /* supported mcs index bit map per nss */
+ __le16 vht_mcs[INFF_VHT_CAP_MCS_MAP_NSS_MAX];
+ } rateset_adv;
+ } v5;
+
+ struct {
+ __le32 rx_dur_total; /* total user RX duration (estimated) */
+ __le16 chanspec; /** chanspec this sta is on */
+ __le16 pad_1;
+ struct {
+ __le16 version; /* version */
+ __le16 len; /* length */
+ /* # rates in this set */
+ __le32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[INFF_MAXRATES_IN_SET];
+ /* supported mcs index bit map */
+ u8 mcs[INFF_MCSSET_LEN];
+ /* supported mcs index bit map per nss */
+ __le16 vht_mcs[INFF_VHT_CAP_MCS_MAP_NSS_MAX];
+ /* supported he mcs index bit map per nss */
+ __le16 he_mcs[INFF_HE_CAP_MCS_MAP_NSS_MAX];
+ } rateset_adv; /* rateset along with mcs index bitmap */
+ __le16 wpauth; /* authentication type */
+ u8 algo; /* crypto algorithm */
+ u8 pad_2;
+ __le32 tx_rspec; /* Rate of last successful tx frame */
+ __le32 rx_rspec; /* Rate of last successful rx frame */
+ __le32 wnm_cap; /* wnm capabilities */
+ } v7;
+ };
+};
+
+struct inff_chanspec_list {
+ __le32 count; /* # of entries */
+ __le32 element[]; /* variable length uint32 list */
+};
+
+/*
+ * WLC_E_PROBRESP_MSG
+ * WLC_E_P2P_PROBREQ_MSG
+ * WLC_E_ACTION_FRAME_RX
+ */
+struct inff_rx_mgmt_data {
+ __be16 version;
+ __be16 chanspec;
+ __be32 rssi;
+ __be32 mactime;
+ __be32 rate;
+};
+
+/**
+ * struct inff_fil_wowl_pattern_le - wowl pattern configuration struct.
+ *
+ * @cmd: "add", "del" or "clr".
+ * @masksize: Size of the mask in #of bytes
+ * @offset: Pattern byte offset in packet
+ * @patternoffset: Offset of start of pattern. Starting from field masksize.
+ * @patternsize: Size of the pattern itself in #of bytes
+ * @id: id
+ * @reasonsize: Size of the wakeup reason code
+ * @type: Type of pattern (enum inff_wowl_pattern_type)
+ */
+struct inff_fil_wowl_pattern_le {
+ u8 cmd[4];
+ __le32 masksize;
+ __le32 offset;
+ __le32 patternoffset;
+ __le32 patternsize;
+ __le32 id;
+ __le32 reasonsize;
+ __le32 type;
+ /* u8 mask[] - Mask follows the structure above */
+ /* u8 pattern[] - Pattern follows the mask is at 'patternoffset' */
+};
+
+struct inff_mbss_ssid_le {
+ __le32 bsscfgidx;
+ __le32 SSID_len;
+ unsigned char SSID[32];
+};
+
+/**
+ * struct inff_fil_country_le - country configuration structure.
+ *
+ * @country_abbrev: null-terminated country code used in the country IE.
+ * @rev: revision specifier for ccode. on set, -1 indicates unspecified.
+ * @ccode: null-terminated built-in country code.
+ */
+struct inff_fil_country_le {
+ char country_abbrev[INFF_COUNTRY_BUF_SZ];
+ __le32 rev;
+ char ccode[INFF_COUNTRY_BUF_SZ];
+};
+
+/**
+ * struct inff_rev_info_le - device revision info.
+ *
+ * @vendorid: PCI vendor id.
+ * @deviceid: device id of chip.
+ * @radiorev: radio revision.
+ * @chiprev: chip revision.
+ * @corerev: core revision.
+ * @boardid: board identifier (usu. PCI sub-device id).
+ * @boardvendor: board vendor (usu. PCI sub-vendor id).
+ * @boardrev: board revision.
+ * @driverrev: driver version.
+ * @ucoderev: microcode version.
+ * @bus: bus type.
+ * @chipnum: chip number.
+ * @phytype: phy type.
+ * @phyrev: phy revision.
+ * @anarev: anacore rev.
+ * @chippkg: chip package info.
+ * @nvramrev: nvram revision number.
+ */
+struct inff_rev_info_le {
+ __le32 vendorid;
+ __le32 deviceid;
+ __le32 radiorev;
+ __le32 chiprev;
+ __le32 corerev;
+ __le32 boardid;
+ __le32 boardvendor;
+ __le32 boardrev;
+ __le32 driverrev;
+ __le32 ucoderev;
+ __le32 bus;
+ __le32 chipnum;
+ __le32 phytype;
+ __le32 phyrev;
+ __le32 anarev;
+ __le32 chippkg;
+ __le32 nvramrev;
+};
+
+/**
+ * struct inff_wlc_version_le - firmware revision info.
+ *
+ * @version: structure version.
+ * @length: structure length.
+ * @epi_ver_major: EPI major version
+ * @epi_ver_minor: EPI minor version
+ * @epi_ver_rc: EPI rc version
+ * @epi_ver_incr: EPI increment version
+ * @wlc_ver_major: WLC major version
+ * @wlc_ver_minor: WLC minor version
+ */
+struct inff_wlc_version_le {
+ __le16 version;
+ __le16 length;
+
+ __le16 epi_ver_major;
+ __le16 epi_ver_minor;
+ __le16 epi_ver_rc;
+ __le16 epi_ver_incr;
+
+ __le16 wlc_ver_major;
+ __le16 wlc_ver_minor;
+};
+
+/**
+ * struct inff_assoclist_le - request assoc list.
+ *
+ * @count: indicates number of stations.
+ * @mac: MAC addresses of stations.
+ */
+struct inff_assoclist_le {
+ __le32 count;
+ u8 mac[INFF_MAX_ASSOCLIST][ETH_ALEN];
+};
+
+/**
+ * struct inff_rssi_be - RSSI threshold event format
+ *
+ * @rssi: receive signal strength (in dBm)
+ * @snr: signal-noise ratio
+ * @noise: noise (in dBm)
+ */
+struct inff_rssi_be {
+ __be32 rssi;
+ __be32 snr;
+ __be32 noise;
+};
+
+#define INFF_MAX_RSSI_LEVELS 8
+
+/**
+ * struct inff_rssi_event_le - rssi_event IOVAR format
+ *
+ * @rate_limit_msec: RSSI event rate limit
+ * @rssi_level_num: number of supplied RSSI levels
+ * @rssi_levels: RSSI levels in ascending order
+ */
+struct inff_rssi_event_le {
+ __le32 rate_limit_msec;
+ s8 rssi_level_num;
+ s8 rssi_levels[INFF_MAX_RSSI_LEVELS];
+};
+
+/**
+ * struct inff_wowl_wakeind_le - Wakeup indicators
+ * Note: note both fields contain same information.
+ *
+ * @pci_wakeind: Whether PCI PMECSR PMEStatus bit was set.
+ * @ucode_wakeind: What wakeup-event indication was set by ucode
+ */
+struct inff_wowl_wakeind_le {
+ __le32 pci_wakeind;
+ __le32 ucode_wakeind;
+};
+
+/**
+ * struct inff_pmksa - PMK Security Association
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: he PMK material itself.
+ */
+struct inff_pmksa {
+ u8 bssid[ETH_ALEN];
+ u8 pmkid[WLAN_PMKID_LEN];
+};
+
+/**
+ * struct inff_pmk_list_le - List of pmksa's.
+ *
+ * @npmk: Number of pmksa's.
+ * @pmk: PMK SA information.
+ */
+struct inff_pmk_list_le {
+ __le32 npmk;
+ struct inff_pmksa pmk[INFF_MAXPMKID];
+};
+
+/**
+ * struct inff_pno_param_le - PNO scan configuration parameters
+ *
+ * @version: PNO parameters version.
+ * @scan_freq: scan frequency.
+ * @lost_network_timeout: #sec. to declare discovered network as lost.
+ * @flags: Bit field to control features of PFN such as sort criteria auto
+ * enable switch and background scan.
+ * @rssi_margin: Margin to avoid jitter for choosing a PFN based on RSSI sort
+ * criteria.
+ * @bestn: number of best networks in each scan.
+ * @mscan: number of scans recorded.
+ * @repeat: minimum number of scan intervals before scan frequency changes
+ * in adaptive scan.
+ * @exp: exponent of 2 for maximum scan interval.
+ * @slow_freq: slow scan period.
+ */
+struct inff_pno_param_le {
+ __le32 version;
+ __le32 scan_freq;
+ __le32 lost_network_timeout;
+ __le16 flags;
+ __le16 rssi_margin;
+ u8 bestn;
+ u8 mscan;
+ u8 repeat;
+ u8 exp;
+ __le32 slow_freq;
+};
+
+/**
+ * struct inff_pno_config_le - PNO channel configuration.
+ *
+ * @reporttype: determines what is reported.
+ * @channel_num: number of channels specified in @channel_list.
+ * @channel_list: channels to use in PNO scan.
+ * @flags: reserved.
+ */
+struct inff_pno_config_le {
+ __le32 reporttype;
+ __le32 channel_num;
+ __le16 channel_list[INFF_NUMCHANNELS];
+ __le32 flags;
+};
+
+/**
+ * struct inff_pno_net_param_le - scan parameters per preferred network.
+ *
+ * @ssid: ssid name and its length.
+ * @flags: bit2: hidden.
+ * @infra: BSS vs IBSS.
+ * @auth: Open vs Closed.
+ * @wpa_auth: WPA type.
+ * @wsec: wsec value.
+ */
+struct inff_pno_net_param_le {
+ struct inff_ssid_le ssid;
+ __le32 flags;
+ __le32 infra;
+ __le32 auth;
+ __le32 wpa_auth;
+ __le32 wsec;
+};
+
+/**
+ * struct inff_pno_net_info_le - information per found network.
+ *
+ * @bssid: BSS network identifier.
+ * @channel: channel number only.
+ * @SSID_len: length of ssid.
+ * @SSID: ssid characters.
+ * @RSSI: receive signal strength (in dBm).
+ * @timestamp: age in seconds.
+ */
+struct inff_pno_net_info_le {
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+ u8 SSID_len;
+ u8 SSID[32];
+ __le16 RSSI;
+ __le16 timestamp;
+};
+
+/**
+ * struct inff_pno_scanresults_le - result returned in PNO NET FOUND event.
+ *
+ * @version: PNO version identifier.
+ * @status: indicates completion status of PNO scan.
+ * @count: amount of inff_pno_net_info_le entries appended.
+ */
+struct inff_pno_scanresults_le {
+ __le32 version;
+ __le32 status;
+ __le32 count;
+};
+
+struct inff_pno_scanresults_v2_le {
+ __le32 version;
+ __le32 status;
+ __le32 count;
+ __le32 scan_ch_bucket;
+};
+
+/**
+ * struct inff_pno_macaddr_le - to configure PNO macaddr randomization.
+ *
+ * @version: PNO version identifier.
+ * @flags: Flags defining how mac addrss should be used.
+ * @mac: MAC address.
+ */
+struct inff_pno_macaddr_le {
+ u8 version;
+ u8 flags;
+ u8 mac[ETH_ALEN];
+};
+
+/**
+ * struct inff_dload_data_le - data passing to firmware for downloading
+ * @flag: flags related to download data.
+ * @dload_type: type of download data.
+ * @len: length in bytes of download data.
+ * @crc: crc of download data.
+ * @data: download data.
+ */
+struct inff_dload_data_le {
+ __le16 flag;
+ __le16 dload_type;
+ __le32 len;
+ __le32 crc;
+ u8 data[];
+};
+
+/**
+ * struct inff_pno_bssid_le - bssid configuration for PNO scan.
+ *
+ * @bssid: BSS network identifier.
+ * @flags: flags for this BSSID.
+ */
+struct inff_pno_bssid_le {
+ u8 bssid[ETH_ALEN];
+ __le16 flags;
+};
+
+/**
+ * struct inff_pktcnt_le - packet counters.
+ *
+ * @rx_good_pkt: packets (MSDUs & MMPDUs) received from this station
+ * @rx_bad_pkt: failed rx packets
+ * @tx_good_pkt: packets (MSDUs & MMPDUs) transmitted to this station
+ * @tx_bad_pkt: failed tx packets
+ * @rx_ocast_good_pkt: unicast packets destined for others
+ */
+struct inff_pktcnt_le {
+ __le32 rx_good_pkt;
+ __le32 rx_bad_pkt;
+ __le32 tx_good_pkt;
+ __le32 tx_bad_pkt;
+ __le32 rx_ocast_good_pkt;
+};
+
+/**
+ * struct inff_gtk_keyinfo_le - GTP rekey data
+ *
+ * @kck: key confirmation key.
+ * @kek: key encryption key.
+ * @replay_counter: replay counter.
+ */
+struct inff_gtk_keyinfo_le {
+ u8 kck[INFF_RSN_KCK_LENGTH];
+ u8 kek[INFF_RSN_KEK_LENGTH];
+ u8 replay_counter[INFF_RSN_REPLAY_LEN];
+};
+
+#define INFF_PNO_REPORT_NO_BATCH BIT(2)
+
+/**
+ * struct inff_gscan_bucket_config - configuration data for channel bucket.
+ *
+ * @bucket_end_index: last channel index in @channel_list in
+ * @struct inff_pno_config_le.
+ * @bucket_freq_multiple: scan interval expressed in N * @scan_freq.
+ * @flag: channel bucket report flags.
+ * @reserved: for future use.
+ * @repeat: number of scan at interval for exponential scan.
+ * @max_freq_multiple: maximum scan interval for exponential scan.
+ */
+struct inff_gscan_bucket_config {
+ u8 bucket_end_index;
+ u8 bucket_freq_multiple;
+ u8 flag;
+ u8 reserved;
+ __le16 repeat;
+ __le16 max_freq_multiple;
+};
+
+/* version supported which must match firmware */
+#define INFF_GSCAN_CFG_VERSION 2
+
+/**
+ * enum inff_gscan_cfg_flags - bit values for gscan flags.
+ *
+ * @INFF_GSCAN_CFG_FLAGS_ALL_RESULTS: send probe responses/beacons to host.
+ * @INFF_GSCAN_CFG_ALL_BUCKETS_IN_1ST_SCAN: all buckets will be included in
+ * first scan cycle.
+ * @INFF_GSCAN_CFG_FLAGS_CHANGE_ONLY: indicated only flags member is changed.
+ */
+enum inff_gscan_cfg_flags {
+ INFF_GSCAN_CFG_FLAGS_ALL_RESULTS = BIT(0),
+ INFF_GSCAN_CFG_ALL_BUCKETS_IN_1ST_SCAN = BIT(3),
+ INFF_GSCAN_CFG_FLAGS_CHANGE_ONLY = BIT(7),
+};
+
+/**
+ * struct inff_gscan_config - configuration data for gscan.
+ *
+ * @version: version of the api to match firmware.
+ * @flags: flags according %enum inff_gscan_cfg_flags.
+ * @buffer_threshold: percentage threshold of buffer to generate an event.
+ * @swc_nbssid_threshold: number of BSSIDs with significant change that
+ * will generate an event.
+ * @swc_rssi_window_size: size of rssi cache buffer (max=8).
+ * @count_of_channel_buckets: number of array members in @bucket.
+ * @retry_threshold: !unknown!
+ * @lost_ap_window: !unknown!
+ * @bucket: array of channel buckets.
+ */
+struct inff_gscan_config {
+ __le16 version;
+ u8 flags;
+ u8 buffer_threshold;
+ u8 swc_nbssid_threshold;
+ u8 swc_rssi_window_size;
+ u8 count_of_channel_buckets;
+ u8 retry_threshold;
+ __le16 lost_ap_window;
+ struct inff_gscan_bucket_config bucket[] __counted_by(count_of_channel_buckets);
+};
+
+/**
+ * struct inff_mkeep_alive_pkt_le - configuration data for keep-alive frame.
+ *
+ * @version: version for mkeep_alive
+ * @length: length of fixed parameters in the structure.
+ * @period_msec: keep-alive period in milliseconds.
+ * @len_bytes: size of the data.
+ * @keep_alive_id: ID (0 - 3).
+ * @data: keep-alive frame data.
+ */
+struct inff_mkeep_alive_pkt_le {
+ __le16 version;
+ __le16 length;
+ __le32 period_msec;
+ __le16 len_bytes;
+ u8 keep_alive_id;
+ u8 data[];
+} __packed;
+
+/* INFF_E_RSSI event data */
+struct wl_event_data_rssi {
+ s32 rssi;
+ s32 snr;
+ s32 noise;
+};
+
+/** RSSI event notification configuration. */
+struct wl_rssi_event {
+ u32 rate_limit_msec;
+ u8 num_rssi_levels;
+ s8 rssi_levels[MAX_RSSI_LEVELS];
+ u8 version;
+ s8 pad[2];
+};
+
+struct ipv4_addr {
+ u8 addr[INFF_IPV4_ADDR_LEN];
+};
+
+struct ipv6_addr {
+ u8 addr[INFF_IPV6_ADDR_LEN];
+};
+
+#endif /* INFF_FWIL_TYPES_H */
--
2.25.1
