There are a few differences in the power on/off functions between PCIE
and USB. The changes in the power off function in particular are needed
for the RTL8832CU to be able to power on again after it's powered off.
While the RTL8832CU appears to work without the changes in the power on
function, it's probably best to implement them, in case they are needed
in some situations.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
v2:
- No change, messed up sending v1.
---
drivers/net/wireless/realtek/rtw89/rtw8852c.c | 31 ++++++++++++++-----
1 file changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c.c b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
index 88cf8ea13e7c..49fdcb9aebb5 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c.c
@@ -214,7 +214,8 @@ static int rtw8852c_pwr_on_func(struct rtw89_dev *rtwdev)
int ret;
val32 = rtw89_read32_mask(rtwdev, R_AX_SYS_STATUS1, B_AX_PAD_HCI_SEL_V2_MASK);
- if (val32 == MAC_AX_HCI_SEL_PCIE_USB)
+ if (val32 == MAC_AX_HCI_SEL_PCIE_USB ||
+ rtwdev->hci.type == RTW89_HCI_TYPE_USB)
rtw89_write32_set(rtwdev, R_AX_LDO_AON_CTRL0, B_AX_PD_REGU_L);
rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_AFSM_WLSUS_EN |
@@ -246,7 +247,9 @@ static int rtw8852c_pwr_on_func(struct rtw89_dev *rtwdev)
rtw89_write8_clr(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_PLATFORM_EN);
rtw89_write8_set(rtwdev, R_AX_PLATFORM_ENABLE, B_AX_PLATFORM_EN);
- rtw89_write32_clr(rtwdev, R_AX_SYS_SDIO_CTRL, B_AX_PCIE_CALIB_EN_V1);
+
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32_clr(rtwdev, R_AX_SYS_SDIO_CTRL, B_AX_PCIE_CALIB_EN_V1);
rtw89_write32_clr(rtwdev, R_AX_SYS_ISO_CTRL_EXTEND, B_AX_CMAC1_FEN);
rtw89_write32_set(rtwdev, R_AX_SYS_ISO_CTRL_EXTEND, B_AX_R_SYM_ISO_CMAC12PP);
@@ -305,9 +308,11 @@ static int rtw8852c_pwr_on_func(struct rtw89_dev *rtwdev)
rtw89_write32_clr(rtwdev, R_AX_SYS_ISO_CTRL, B_AX_PWC_EV2EF_B14);
rtw89_write32_clr(rtwdev, R_AX_PMC_DBG_CTRL2, B_AX_SYSON_DIS_PMCR_AX_WRMSK);
- rtw89_write32_set(rtwdev, R_AX_GPIO0_15_EECS_EESK_LED1_PULL_LOW_EN,
- B_AX_EECS_PULL_LOW_EN | B_AX_EESK_PULL_LOW_EN |
- B_AX_LED1_PULL_LOW_EN);
+
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32_set(rtwdev, R_AX_GPIO0_15_EECS_EESK_LED1_PULL_LOW_EN,
+ B_AX_EECS_PULL_LOW_EN | B_AX_EESK_PULL_LOW_EN |
+ B_AX_LED1_PULL_LOW_EN);
rtw89_write32_set(rtwdev, R_AX_DMAC_FUNC_EN,
B_AX_MAC_FUNC_EN | B_AX_DMAC_FUNC_EN | B_AX_MPDU_PROC_EN |
@@ -385,12 +390,24 @@ static int rtw8852c_pwr_off_func(struct rtw89_dev *rtwdev)
if (ret)
return ret;
- rtw89_write32(rtwdev, R_AX_WLLPS_CTRL, SW_LPS_OPTION);
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ rtw89_write32(rtwdev, R_AX_WLLPS_CTRL, SW_LPS_OPTION);
+ else if (rtwdev->hci.type == RTW89_HCI_TYPE_USB)
+ rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_SOP_EDSWR);
+
rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_XTAL_OFF_A_DIE);
rtw89_write32_set(rtwdev, R_AX_SYS_SWR_CTRL1, B_AX_SYM_CTRL_SPS_PWMFREQ);
rtw89_write32_mask(rtwdev, R_AX_SPS_DIG_ON_CTRL0,
B_AX_REG_ZCDC_H_MASK, 0x3);
- rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFM_SWLPS);
+
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE) {
+ rtw89_write32_set(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFM_SWLPS);
+ } else if (rtwdev->hci.type == RTW89_HCI_TYPE_USB) {
+ val32 = rtw89_read32(rtwdev, R_AX_SYS_PW_CTRL);
+ val32 &= ~B_AX_AFSM_PCIE_SUS_EN;
+ val32 |= B_AX_AFSM_WLSUS_EN;
+ rtw89_write32(rtwdev, R_AX_SYS_PW_CTRL, val32);
+ }
return 0;
}
--
2.50.0
