Thank you so much for review.
On 7/8/25 2:47 PM, Krishna Chaitanya Chundru wrote:
>
>
> On 6/30/2025 1:13 PM, Muhammad Usama Anjum wrote:
>> When there is memory pressure, at resume time dma_alloc_coherent()
>> returns error which in turn fails the loading of firmware and hence
>> the driver crashes:
>>
> why only bhi? bhie can also have same issue.
I was thinking I'd handled all bhie cases in earlier patch. But I haven't. I'll post
fix for bhie in next version.
>> kernel: kworker/u33:5: page allocation failure: order:7,
>> mode:0xc04(GFP_NOIO|GFP_DMA32), nodemask=(null),cpuset=/,mems_allowed=0
>> kernel: CPU: 1 UID: 0 PID: 7693 Comm: kworker/u33:5 Not tainted
>> 6.11.11-valve17-1-neptune-611-g027868a0ac03 #1
>> 3843143b92e9da0fa2d3d5f21f51beaed15c7d59
>> kernel: Hardware name: Valve Galileo/Galileo, BIOS F7G0112 08/01/2024
>> kernel: Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi]
>> kernel: Call Trace:
>> kernel: <TASK>
>> kernel: dump_stack_lvl+0x4e/0x70
>> kernel: warn_alloc+0x164/0x190
>> kernel: ? srso_return_thunk+0x5/0x5f
>> kernel: ? __alloc_pages_direct_compact+0xaf/0x360
>> kernel: __alloc_pages_slowpath.constprop.0+0xc75/0xd70
>> kernel: __alloc_pages_noprof+0x321/0x350
>> kernel: __dma_direct_alloc_pages.isra.0+0x14a/0x290
>> kernel: dma_direct_alloc+0x70/0x270
>> kernel: mhi_fw_load_handler+0x126/0x340 [mhi
>> a96cb91daba500cc77f86bad60c1f332dc3babdf]
>> kernel: mhi_pm_st_worker+0x5e8/0xac0 [mhi
>> a96cb91daba500cc77f86bad60c1f332dc3babdf]
>> kernel: ? srso_return_thunk+0x5/0x5f
>> kernel: process_one_work+0x17e/0x330
>> kernel: worker_thread+0x2ce/0x3f0
>> kernel: ? __pfx_worker_thread+0x10/0x10
>> kernel: kthread+0xd2/0x100
>> kernel: ? __pfx_kthread+0x10/0x10
>> kernel: ret_from_fork+0x34/0x50
>> kernel: ? __pfx_kthread+0x10/0x10
>> kernel: ret_from_fork_asm+0x1a/0x30
>> kernel: </TASK>
>> kernel: Mem-Info:
>> kernel: active_anon:513809 inactive_anon:152 isolated_anon:0
>> active_file:359315 inactive_file:2487001 isolated_file:0
>> unevictable:637 dirty:19 writeback:0
>> slab_reclaimable:160391 slab_unreclaimable:39729
>> mapped:175836 shmem:51039 pagetables:4415
>> sec_pagetables:0 bounce:0
>> kernel_misc_reclaimable:0
>> free:125666 free_pcp:0 free_cma:0
>>
>> In above example, if we sum all the consumed memory, it comes out
>> to be 15.5GB and free memory is ~ 500MB from a total of 16GB RAM.
>> Even though memory is present. But all of the dma memory has been
>> exhausted or fragmented.
>>
>> Fix it by allocating it only once and then reuse the same allocated
>> memory. As we'll allocate this memory only once, this memory will stay
>> allocated.
>>
>> Tested-on: WCN6855 WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
>>
>> Fixes: cd457afb1667 ("bus: mhi: core: Add support for downloading firmware over BHIe")
>> Signed-off-by: Muhammad Usama Anjum <usama.anjum@xxxxxxxxxxxxx>
>> ---
>> Reported here:
>> https://lore.kernel.org/all/ead32f5b-730a-4b81-b38f-93d822f990c6@xxxxxxxxxxxxx
>>
>> Still a lot of more fixes are required. Hence, I'm not adding closes tag.
>> ---
>> drivers/bus/mhi/host/boot.c | 19 ++++++++++---------
>> drivers/bus/mhi/host/init.c | 5 +++++
>> drivers/bus/mhi/host/internal.h | 2 ++
>> include/linux/mhi.h | 1 +
>> 4 files changed, 18 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
>> index b3a85aa3c4768..11bb8c12ac597 100644
>> --- a/drivers/bus/mhi/host/boot.c
>> +++ b/drivers/bus/mhi/host/boot.c
>> @@ -302,8 +302,8 @@ static int mhi_fw_load_bhi(struct mhi_controller *mhi_cntrl,
>> return -EIO;
>> }
>> -static void mhi_free_bhi_buffer(struct mhi_controller *mhi_cntrl,
>> - struct image_info *image_info)
>> +void mhi_free_bhi_buffer(struct mhi_controller *mhi_cntrl,
>> + struct image_info *image_info)
>> {
>> struct mhi_buf *mhi_buf = image_info->mhi_buf;
>> @@ -455,18 +455,19 @@ static enum mhi_fw_load_type mhi_fw_load_type_get(const struct mhi_controller *m
>> static int mhi_load_image_bhi(struct mhi_controller *mhi_cntrl, const u8 *fw_data, size_t size)
>> {
>> - struct image_info *image;
>> + struct image_info *image = mhi_cntrl->bhi_image;
>> int ret;
>> - ret = mhi_alloc_bhi_buffer(mhi_cntrl, &image, size);
>> - if (ret)
>> - return ret;
>> + if (!image) {
>> + ret = mhi_alloc_bhi_buffer(mhi_cntrl, &image, size);
>> + if (ret)
>> + return ret;
>> - /* Load the firmware into BHI vec table */
>> - memcpy(image->mhi_buf->buf, fw_data, size);
>> + /* Load the firmware into BHI vec table */
>> + memcpy(image->mhi_buf->buf, fw_data, size);
>> + }
>> ret = mhi_fw_load_bhi(mhi_cntrl, &image->mhi_buf[image->entries - 1]);
> if mhi fw load fails didn't we need to free bhi buffer.
Good point. I'll fix in v2.
