Ping-Ke Shih <pkshih@xxxxxxxxxxx> wrote: > From: Chin-Yen Lee <timlee@xxxxxxxxxxx> > > Sometimes PCIe Advanced Error Reporting(AER), like bad TLP or > Data link protocol error, happens due to unstable pci signal or > no response from PCI host. > > pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0 > pcieport 0000:00:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) > pcieport 0000:00:00.0: AER: device [14c3:6786] error status/mask=000000c1/00006000 > pcieport 0000:00:00.0: AER: [ 0] RxErr (First) > pcieport 0000:00:00.0: AER: [ 6] BadTLP > pcieport 0000:00:00.0: AER: [ 7] BadDLLP > pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0 > pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0 > pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0 > pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0 > pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0 > pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0 > > Setup callback function to call SER function to reset driver to recover > from these states > > Signed-off-by: Chin-Yen Lee <timlee@xxxxxxxxxxx> > Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> 2 patch(es) applied to rtw-next branch of rtw.git, thanks. cdb82c80b934 wifi: rtw88: pci: add PCI Express error handling 16e3d93c6183 wifi: rtw89: pci: add PCI Express error handling --- https://github.com/pkshih/rtw.git
