Add support for the new ath12k AHB device IPQ5424, as currently, Ath12k AHB only supports IPQ5332 WiFi devices. The IPQ5424 is an IEEE 802.11be 2 GHz WiFi device, supporting 4x4 configurations. To enable the IPQ5424 device: - Add the necessary hardware parameters for IPQ5424. - Modify the boot-up sequence for ath12k AHB to accommodate the requirements of the IPQ5424 device. --- Changes in v2: - DT binding: Removed the redundant example for IPQ5424, as it is similar to IPQ5332. - Added driver probe data structure to eliminate the redundant switch-case logic in the ath12k_ahb_probe() function. - Validation completed, hence changed from RFC to PATCH. - Link to v1: https://lore.kernel.org/all/20250130051838.1924079-1-quic_rajkbhag@xxxxxxxxxxx/ --- Raj Kumar Bhagat (1): dt-bindings: net: wireless: add ath12k wifi device IPQ5424 Saravanakumar Duraisamy (3): wifi: ath12k: Add ath12k_hw_params for IPQ5424 wifi: ath12k: add ath12k_hw_regs for IPQ5424 wifi: ath12k: Add CE remap hardware parameters for IPQ5424 Sowmiya Sree Elavalagan (1): wifi: ath12k: Enable IPQ5424 WiFi device support .../bindings/net/wireless/qcom,ipq5332-wifi.yaml | 1 + drivers/net/wireless/ath/ath12k/ahb.c | 116 +++++++------ drivers/net/wireless/ath/ath12k/ahb.h | 17 +- drivers/net/wireless/ath/ath12k/ce.h | 13 +- drivers/net/wireless/ath/ath12k/core.h | 1 + drivers/net/wireless/ath/ath12k/hal.h | 3 + drivers/net/wireless/ath/ath12k/hw.c | 180 ++++++++++++++++++++- 7 files changed, 278 insertions(+), 53 deletions(-) --- base-commit: 172e1570e1d31260f11f43e828d98aff020726a8 change-id: 20250518-ath12k-ipq5424-7fc6ec543527
