Search Linux Wireless

Re: [PATCH wireless-next v3 0/4] wifi: brcmfmac: external auth support for Infineon devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: arend.vanspriel@xxxxxxxxxxxx
Subject: Re: [PATCH wireless-next v3 0/4] wifi: brcmfmac: external auth support for Infineon devices
From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
Date: Thu, 15 May 2025 17:38:39 -0700
Cc: brcm80211@xxxxxxxxxxxxxxx, Johannes Berg <johannes@xxxxxxxxxxxxxxxx>, linux-wireless <linux-wireless@xxxxxxxxxxxxxxx>

Hi Arend,

Thanks for this series! This allows WPA3 Personal in STA mode on a
CYW4373E based module we use on our boards however AP mode with WPA3
Personal does not appear to work. Do you know what is needed to allow
WPA3 Personal in a CYW4373E AP?

Best Regards,

Tim

Follow-Ups:
- Re: [PATCH wireless-next v3 0/4] wifi: brcmfmac: external auth support for Infineon devices
  - From: Arend Van Spriel

Prev by Date: Re: [PATCH rtw-next] wifi: rtw89: pci: enlarge retry times of RX tag to 1000
Next by Date: Re: [PATCH rtw-next v2 1/2] wifi: rtw88: usb: Reduce control message timeout to 500 ms
Previous by thread: Re: [PATCH wireless-next v3 0/4] wifi: brcmfmac: external auth support for Infineon devices
Next by thread: Re: [PATCH wireless-next v3 0/4] wifi: brcmfmac: external auth support for Infineon devices
Index(es):
- Date
- Thread

[Index of Archives] [Linux Host AP] [ATH6KL] [Linux Wireless Personal Area Network] [Linux Bluetooth] [Wireless Regulations] [Linux Netdev] [Kernel Newbies] [Linux Kernel] [IDE] [Git] [Netfilter] [Bugtraq] [Yosemite Hiking] [MIPS Linux] [ARM Linux] [Linux RAID]

Powered by Linux