Search Linux Wireless

Re: wifi: iwlwifi: SAE fails when AP sends confirm before STA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13 09:03:54, Denis Kenzior wrote:
> Hi Jan,
> 
> >
> > There is a an SAE confirm sent by the AP. It's frame 170 in
> > capture2.pcapng. It's also retried a number of times after that.
> > 
> 
> What I also find interesting is that the kernel on the client side reports
> sending the Authenticate-Confirm 3 times (according to dmesg and
> trace2.dat), but only a single Confirm from the client is seen in the air
> trace.  I'm guessing the retransmissions (attempt 2 & 3) are lost somehow?.

Yes this is weird. On my first capture I did see those additional
confirm frames from the client (frame 4007 and 4052 in capture.pcapng).
So maybe the capture device missed them in the second capture? Although
the RSSIs look good in the 2nd capture.

> 
> [64414.164169] wlan0: send auth to 96:2a:6f:b6:d7:9f (try 2/3)
> [64415.063575] iwlwifi 0000:00:14.3: Not associated and the session
> protection is over already...
> [64415.063668] wlan0: Connection to AP 96:2a:6f:b6:d7:9f lost
> [64416.215729] wlan0: send auth to 96:2a:6f:b6:d7:9f (try 3/3)
> 
> Regards,
> -Denis




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux