On 4/24/2025 6:27 AM, Miaoqing Pan wrote:
Introduce 'firmware-name' property to allow end-users and/or integrators to decide which usecase-specific firmware to run on the WCN7850 platform. This is necessary due to resource limitations such as memory capacity and CPU capability, or performance and power optimization for different application scenarios. Currently, there are two firmwares, both files can be executed interchangeably. For example: - ath12k/WCN7850/hw2.0/amss.bin, ath12k/WCN7850/hw2.0/m3.bin ath12k/WCN7850/hw2.0/board-2.bin - ath12k/WCN7850/hw2.0/ncm825/amss.bin, ath12k/WCN7850/hw2.0/ncm825/m3.bin ath12k/WCN7850/hw2.0/board-2.bin The former is the default firmware, suitable for most WiFi 7 STA functions. The latter adds support for commercial-quality SAP and optimizes power consumption for IoT applications. And both use the same BDF/regdb data within the main board-2.bin. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@xxxxxxxxxxxxxxxx>
