From: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> [ Upstream commit 9f00e2218e15a2ea3c284567424a100c10b6fb85 ] This function tells the firmware what rates it can use. Put the 3SS and 4SS HT rates supported by the other station into the rate mask. Remove the 3SS and 4SS rates from the rate mask if the hardware only has 2 spatial streams. And finally, select the right rate ID (a parameter for the firmware) when the hardware has 3 spatial streams. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> Acked-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> Link: https://patch.msgid.link/48d1d90f-2aeb-4ec5-9a24-0980e10eae1e@xxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/realtek/rtw88/main.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index f4ee4e922afa7..9b9e76eebce95 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -1234,7 +1234,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si, if (sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_RXLDPC) ldpc_en = VHT_LDPC_EN; } else if (sta->deflink.ht_cap.ht_supported) { - ra_mask |= (sta->deflink.ht_cap.mcs.rx_mask[1] << 20) | + ra_mask |= ((u64)sta->deflink.ht_cap.mcs.rx_mask[3] << 36) | + ((u64)sta->deflink.ht_cap.mcs.rx_mask[2] << 28) | + (sta->deflink.ht_cap.mcs.rx_mask[1] << 20) | (sta->deflink.ht_cap.mcs.rx_mask[0] << 12); if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_RX_STBC) stbc_en = HT_STBC_EN; @@ -1244,6 +1246,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si, if (efuse->hw_cap.nss == 1 || rtwdev->hal.txrx_1ss) ra_mask &= RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS; + else if (efuse->hw_cap.nss == 2) + ra_mask &= RA_MASK_VHT_RATES_2SS | RA_MASK_HT_RATES_2SS | + RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS; if (hal->current_band_type == RTW_BAND_5G) { ra_mask |= (u64)sta->deflink.supp_rates[NL80211_BAND_5GHZ] << 4; @@ -1302,10 +1307,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si, break; } - if (sta->deflink.vht_cap.vht_supported && ra_mask & 0xffc00000) - tx_num = 2; - else if (sta->deflink.ht_cap.ht_supported && ra_mask & 0xfff00000) - tx_num = 2; + if (sta->deflink.vht_cap.vht_supported || + sta->deflink.ht_cap.ht_supported) + tx_num = efuse->hw_cap.nss; rate_id = get_rate_id(wireless_set, bw_mode, tx_num); -- 2.39.5
