Ping-Ke Shih <pkshih@xxxxxxxxxxx> wrote: > The RX DCK in firmware could retry 3 times if calibration value is not > stable. Roughly each calibration can be done within 16 ms, so expect > 16 * 4 (with additional 16 ms) will be enough. More, in coming MLO, it > will do calibration on two path, so multiply 2. > > Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> 10 patch(es) applied to rtw-next branch of rtw.git, thanks. b47e250e593e wifi: rtw89: 8922a: rfk: adjust timeout time of RX DCK 372559788161 wifi: rtw89: 8922a: use SW CRYPTO when broadcast in MLO mode e6512916eeb1 wifi: rtw89: Adjust management queue mapping for [MLO, HW-1] 6d9e16a961a3 wifi: rtw89: extend mapping from Qsel to DMA ch for MLO 667231dfea08 wifi: rtw89: Configure scan band when mlo_dbcc_mode changes 8bb7dfa6b5b9 wifi: rtw89: extend join_info H2C command for MLO fields 9f1aa1054d80 wifi: rtw89: add MLD capabilities declaration 6173b636c722 wifi: rtw89: Fill in correct Rx link ID for MLO d0e6c18fff72 wifi: rtw89: roc: dynamically handle link id and link instance index c3dded779137 wifi: rtw89: introduce helper to get designated link for MLO --- https://github.com/pkshih/rtw.git
