From: Avraham Stern <avraham.stern@xxxxxxxxx> When a soft AP is started, it may not use the full configured bandwidth (e.g. if no station is connected). As a result, the responder will not support the configured bandwidth. Since the responder supports ranging with unassociated stations, there is no indication to the driver when the full bandwidth should be enabled. Fix it by configuring the AP to always use the full bandwidth when a responder is supported. Signed-off-by: Avraham Stern <avraham.stern@xxxxxxxxx> Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@xxxxxxxxx> --- drivers/net/wireless/intel/iwlwifi/mld/phy.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/phy.c b/drivers/net/wireless/intel/iwlwifi/mld/phy.c index 3a80ee5e1cb3..d5a32ee56b92 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/phy.c +++ b/drivers/net/wireless/intel/iwlwifi/mld/phy.c @@ -50,6 +50,9 @@ static void iwl_mld_chanctx_usage_iter(void *_data, u8 *mac, if (rcu_access_pointer(link_conf->chanctx_conf) != data->ctx) continue; + if (vif->type == NL80211_IFTYPE_AP && link_conf->ftm_responder) + data->use_def = true; + if (iwl_mld_chanctx_fils_enabled(vif, data->ctx)) data->use_def = true; } -- 2.34.1
