On 4/24/2025 11:21 AM, Baochen Qiang wrote:
On 4/16/2025 6:09 PM, balsam.chihi@xxxxxxxxxxx wrote:
From: Balsam CHIHI <balsam.chihi@xxxxxxxxxxx>
This patch addresses a crash issue that occurs when unloading the
ath11k_pci driver with QCN9074 PCIe WiFi 6 modules.
The crash is caused by the driver attempting to perform reset
operations during unload, leading to a synchronous external abort
Do we know the root cause of the synchronous external abort?
and kernel panic, as indicated by the error log:
[ 5615.902985] Internal error: synchronous external abort: 0000000096000210 [#1] SMP
...
[ 5616.056382] CPU: 7 PID: 12605 Comm: procd Tainted: G O 6.6.73 #0
...
[ 5616.069876] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 5616.076841] pc : ath11k_pci_get_msi_irq+0x18b4/0x1914 [ath11k_pci]
[ 5616.083035] lr : ath11k_pcic_init_msi_config+0x98/0xc4 [ath11k]
[ 5616.163712] Call trace:
[ 5616.166153] ath11k_pci_get_msi_irq+0x18b4/0x1914 [ath11k_pci]
[ 5616.171993] ath11k_pcic_init_msi_config+0x98/0xc4 [ath11k]
[ 5616.177583] ath11k_pcic_read32+0x30/0xb4 [ath11k]
[ 5616.182391] ath11k_pci_get_msi_irq+0x528/0x1914 [ath11k_pci]
[ 5616.188143] ath11k_pci_get_msi_irq+0x147c/0x1914 [ath11k_pci]
[ 5616.193983] ath11k_pci_get_msi_irq+0x1764/0x1914 [ath11k_pci]
[ 5616.199822] pci_device_shutdown+0x34/0x44
[ 5616.203923] device_shutdown+0x160/0x268
[ 5616.207847] kernel_restart+0x40/0xc0
[ 5616.211512] __do_sys_reboot+0x104/0x23c
[ 5616.215436] __arm64_sys_reboot+0x24/0x30
[ 5616.219447] do_el0_svc+0x6c/0xfc
[ 5616.222761] el0_svc+0x28/0x9c
[ 5616.225817] el0t_64_sync_handler+0x120/0x12c
[ 5616.230174] el0t_64_sy
[ 5616.233839] Code: f94e0a80 92404a73 91420273 8b130013 (b9400273)
[ 5616.239932] ---[ end trace 0000000000000000 ]---
[ 5616.244547] Kernel panic - not syncing: synchronous external abort: Fatal exception in interrupt
[ 5616.253343] Kernel Offset: disabled
[ 5616.256827] CPU features: 0x0,00000000,00020000,1000400b
[ 5616.262138] Memory Limit: none
[ 5616.265188] Rebooting in 3 seconds..
[ 5620.268926] Unable to restart system
[ 5620.272503] Reboot failed -- System halted
The fix involves adding a conditional check for the power state before
performing the reset operations in the ath11k_pci_sw_reset function.
This ensures that the reset functions are only called when loading the driver,
The ath11k_pci_soc_global_reset() is called to make sure the device is in the expected
state, such that after machine restart, the device can be successfully enumerated. If
skipped, the chip may be not detected. At least this is the case for WCN6855, for others I
am not sure.
It is not safe to skip soc_global_reset for QCN9074 also as this may leave target
in an unknown state. Better to get the actual register access that is causing
the error, also we check check ath11k debug log with debug_mask=0x1020 enabling
boot and ath_pci debugs.
Vasanth
