For single pdev device, radio number of a device is forced as 1 in
ath12k_wmi_ext_soc_hal_reg_caps_parse(). This leads to ah->num_radio == 1
and then in ath12k_mac_setup_iface_combinations() we report to
mac/cfg80211 that only 1 channel is supported. In MLO case, it finally
results in failing to bring up the second link as it is in another
channel.
Change num_different_channels to 2 to allow a second link. Since DFS on
multiple channels are not supported yet, remove radar_detect_widths.
For now WCN7850 is the only single pdev device, so others should not be
affected.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/mac.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 699772a471f5f81c42009b529e756fa75bca0779..ac15527571dda60c69c898488ee06a21aa635163 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -11082,13 +11082,18 @@ ath12k_mac_setup_radio_iface_comb(struct ath12k *ar,
comb[0].limits = limits;
comb[0].n_limits = n_limits;
comb[0].max_interfaces = max_interfaces;
- comb[0].num_different_channels = 1;
comb[0].beacon_int_infra_match = true;
comb[0].beacon_int_min_gcd = 100;
- comb[0].radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
- BIT(NL80211_CHAN_WIDTH_20) |
- BIT(NL80211_CHAN_WIDTH_40) |
- BIT(NL80211_CHAN_WIDTH_80);
+
+ if (ar->ab->hw_params->single_pdev_only) {
+ comb[0].num_different_channels = 2;
+ } else {
+ comb[0].num_different_channels = 1;
+ comb[0].radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40) |
+ BIT(NL80211_CHAN_WIDTH_80);
+ }
return 0;
}
--
2.25.1
