A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled. Reported-by: Robert Morris <rtm@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/88967.1743099372@localhost Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots") Signed-off-by: Toke Høiland-Jørgensen <toke@xxxxxxx> --- drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c index 547634f82183..81fa7cbad892 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c @@ -290,6 +290,9 @@ void ath9k_htc_swba(struct ath9k_htc_priv *priv, struct ath_common *common = ath9k_hw_common(priv->ah); int slot; + if (!priv->cur_beacon_conf.enable_beacon) + return; + if (swba->beacon_pending != 0) { priv->beacon.bmisscnt++; if (priv->beacon.bmisscnt > BSTUCK_THRESHOLD) { -- 2.48.1
