Hi Francesco, On Wed, Mar 26, 2025 at 01:23:35PM +0100, Francesco Dolcini wrote: > On Wed, Mar 26, 2025 at 01:18:34PM +0100, Sascha Hauer wrote: > > This adds iw61x aka SD9177 support to the mwifiex driver. It is named > > SD9177 in the downstream driver, I deliberately chose the NXP name in > > the driver. > > > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > --- > > drivers/net/wireless/marvell/mwifiex/sdio.c | 79 +++++++++++++++++++++++++++++ > > drivers/net/wireless/marvell/mwifiex/sdio.h | 3 ++ > > include/linux/mmc/sdio_ids.h | 3 ++ > > 3 files changed, 85 insertions(+) > > > > diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c > > index cbcb5674b8036..7b4045a40df57 100644 > > --- a/drivers/net/wireless/marvell/mwifiex/sdio.c > > +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c > > ... > > > @@ -3212,3 +3289,5 @@ MODULE_FIRMWARE(SD8978_SDIOUART_FW_NAME); > > MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME); > > MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME); > > MODULE_FIRMWARE(SD8997_SDIOUART_FW_NAME); > > +MODULE_FIRMWARE(IW612_DEFAULT_FW_NAME); > > +MODULE_FIRMWARE(IW612_SDIOUART_FW_NAME); > > diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h > > index 65d142286c46e..97759456314b0 100644 > > --- a/drivers/net/wireless/marvell/mwifiex/sdio.h > > +++ b/drivers/net/wireless/marvell/mwifiex/sdio.h > > @@ -29,6 +29,9 @@ > > #define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin" > > #define SD8997_DEFAULT_FW_NAME "mrvl/sdsd8997_combo_v4.bin" > > #define SD8997_SDIOUART_FW_NAME "mrvl/sdiouart8997_combo_v4.bin" > > +#define IW612_DEFAULT_FW_NAME "nxp/sdsd_nw61x.bin" > > +#define IW612_SDIOUART_FW_NAME "nxp/sd_w61x.bin" > > Is there a way to have BT over SDIO with iw61x? I was sure only sd-uart was > possible. The communication to the Bluetooth module indeed is UART only. I think nxp/sdsd_nw61x.bin contains firmwares for both the WiFi and Bluetooth chip. When using this you can use the Bluetooth UART directly without uploading a separate Bluetooth firmware. nxp/sd_w61x.bin only contains the WiFi firmware, so you have to upload a separate Bluetooth firmware over the UART interface. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
