Hi Zigit:
On Tue, Jul 15, 2025 at 7:00 PM Zigit Zo <zuozhijie@xxxxxxxxxxxxx> wrote:
>
> On 7/15/25 5:31 PM, Jason Wang wrote:
> > On Wed, Jul 2, 2025 at 6:37 PM Zigit Zo <zuozhijie@xxxxxxxxxxxxx> wrote:
> >>
> >> This bug happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while
> >> the virtio-net driver is still probing with rtnl_lock() hold, this will
> >> cause a recursive mutex in netdev_notify_peers().
> >>
> >> Fix it by temporarily save the announce status while probing, and then in
> >> virtnet_open(), if it sees a delayed announce work is there, it starts to
> >> schedule the virtnet_config_changed_work().
> >>
> >> Another possible solution is to directly check whether rtnl_is_locked()
> >> and call __netdev_notify_peers(), but in that way means we need to relies
> >> on netdev_queue to schedule the arp packets after ndo_open(), which we
> >> thought is not very intuitive.
> >>
> >> We've observed a softlockup with Ubuntu 24.04, and can be reproduced with
> >> QEMU sending the announce_self rapidly while booting.
> >>
> >> [ 494.167473] INFO: task swapper/0:1 blocked for more than 368 seconds.
> >> [ 494.167667] Not tainted 6.8.0-57-generic #59-Ubuntu
> >> [ 494.167810] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> >> [ 494.168015] task:swapper/0 state:D stack:0 pid:1 tgid:1 ppid:0 flags:0x00004000
> >> [ 494.168260] Call Trace:
> >> [ 494.168329] <TASK>
> >> [ 494.168389] __schedule+0x27c/0x6b0
> >> [ 494.168495] schedule+0x33/0x110
> >> [ 494.168585] schedule_preempt_disabled+0x15/0x30
> >> [ 494.168709] __mutex_lock.constprop.0+0x42f/0x740
> >> [ 494.168835] __mutex_lock_slowpath+0x13/0x20
> >> [ 494.168949] mutex_lock+0x3c/0x50
> >> [ 494.169039] rtnl_lock+0x15/0x20
> >> [ 494.169128] netdev_notify_peers+0x12/0x30
> >> [ 494.169240] virtnet_config_changed_work+0x152/0x1a0
> >> [ 494.169377] virtnet_probe+0xa48/0xe00
> >> [ 494.169484] ? vp_get+0x4d/0x100
> >> [ 494.169574] virtio_dev_probe+0x1e9/0x310
> >> [ 494.169682] really_probe+0x1c7/0x410
> >> [ 494.169783] __driver_probe_device+0x8c/0x180
> >> [ 494.169901] driver_probe_device+0x24/0xd0
> >> [ 494.170011] __driver_attach+0x10b/0x210
> >> [ 494.170117] ? __pfx___driver_attach+0x10/0x10
> >> [ 494.170237] bus_for_each_dev+0x8d/0xf0
> >> [ 494.170341] driver_attach+0x1e/0x30
> >> [ 494.170440] bus_add_driver+0x14e/0x290
> >> [ 494.170548] driver_register+0x5e/0x130
> >> [ 494.170651] ? __pfx_virtio_net_driver_init+0x10/0x10
> >> [ 494.170788] register_virtio_driver+0x20/0x40
> >> [ 494.170905] virtio_net_driver_init+0x97/0xb0
> >> [ 494.171022] do_one_initcall+0x5e/0x340
> >> [ 494.171128] do_initcalls+0x107/0x230
> >> [ 494.171228] ? __pfx_kernel_init+0x10/0x10
> >> [ 494.171340] kernel_init_freeable+0x134/0x210
> >> [ 494.171462] kernel_init+0x1b/0x200
> >> [ 494.171560] ret_from_fork+0x47/0x70
> >> [ 494.171659] ? __pfx_kernel_init+0x10/0x10
> >> [ 494.171769] ret_from_fork_asm+0x1b/0x30
> >> [ 494.171875] </TASK>
> >>
> >> Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
> >> Signed-off-by: Zigit Zo <zuozhijie@xxxxxxxxxxxxx>
> >> ---
> >> v1 -> v2:
> >> - Check vi->status in virtnet_open().
> >> v1:
> >> - https://lore.kernel.org/netdev/20250630095109.214013-1-zuozhijie@xxxxxxxxxxxxx/
> >> ---
> >> drivers/net/virtio_net.c | 43 ++++++++++++++++++++++++----------------
> >> 1 file changed, 26 insertions(+), 17 deletions(-)
> >>
> >> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> >> index e53ba600605a..859add98909b 100644
> >> --- a/drivers/net/virtio_net.c
> >> +++ b/drivers/net/virtio_net.c
> >> @@ -3151,6 +3151,10 @@ static int virtnet_open(struct net_device *dev)
> >> if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> >> if (vi->status & VIRTIO_NET_S_LINK_UP)
> >> netif_carrier_on(vi->dev);
> >> + if (vi->status & VIRTIO_NET_S_ANNOUNCE) {
> >> + vi->status &= ~VIRTIO_NET_S_ANNOUNCE;
> >> + schedule_work(&vi->config_work);
> >> + }
> >> virtio_config_driver_enable(vi->vdev);
> >
> > Instead of doing tricks like this.
> >
> > I wonder if the fix is as simple as calling
> > virtio_config_driver_disable() before init_vqs()?
> >
> > Thanks
> >
>
> That might not work as the device like QEMU will set the VIRTIO_NET_S_ANNOUNCE
> regardless of most of the driver status, QEMU only checks whether the driver has
> finalized it's features with VIRTIO_NET_F_GUEST_ANNOUNCE & VIRTIO_NET_F_CTRL_VQ.
>
> We've made a little patch to verify, don't know if it matches your thought, but
> it does not seem to work :(
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index e53ba600605a..f309ce3fe243 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -6903,6 +6903,9 @@ static int virtnet_probe(struct virtio_device *vdev)
> vi->curr_queue_pairs = num_online_cpus();
> vi->max_queue_pairs = max_queue_pairs;
>
> + /* Disable config change notification until ndo_open. */
> + virtio_config_driver_disable(vi->vdev);
> +
> /* Allocate/initialize the rx/tx queues, and invoke find_vqs */
> err = init_vqs(vi);
> if (err)
> @@ -6965,9 +6968,6 @@ static int virtnet_probe(struct virtio_device *vdev)
> goto free_failover;
> }
>
> - /* Disable config change notification until ndo_open. */
> - virtio_config_driver_disable(vi->vdev);
> -
> virtio_device_ready(vdev);
>
> if (vi->has_rss || vi->has_rss_hash_report) {
>
> For reproduce details,
>
> 1. Spawn qemu with monitor, like `-monitor unix:qemu.sock,server`
> 2. In another window, run `while true; echo "announce_self"; end | socat - unix-connect:qemu.sock > /dev/null`
> 3. The boot up will get hanged when probing the virtio_net
>
> The simplest version we've made is to revert the usage of
> `virtnet_config_changed_work()` back to the `schedule_work()`, but as in v1,
> we're still trying to understand the impact, making sure that it won't break
> other things.
>
> Regards,
>
Thanks for the clarification. Now I see the issue.
It looks like the root cause is to call virtio_config_changed_work()
directly during probe().
Let's switch to use virtio_config_changed() instead so that we can
properly check the config_driver_disabled.
Thanks
