From: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
This series focuses on adding Type-C DP support for USBDP PHY and DP
driver. The USBDP PHY and DP will perceive the changes in cable status
based on the USB PD and Type-C state machines provided by TCPM. Before
this, the USBDP PHY and DP controller of RK3399 sensed cable state
changes through extcon, and devices such as the RK3399 Gru-Chromebook
rely on them. This series should not break them.
====
1. DisplayPort HPD status notify
Before v4, I implemented a variety of DP HPD status notify. However,
they all had various problems and it was difficult to become a common
solution.
Under Dmitry's guidance, I try to add default DRM AUX HPD device when
register DisplayPort altmode in patch 1. That makes it redundant for
each Type-C chip driver to implement a similar registration process
in embedded scenarios.
I'm not certain if the current implementation is appropriate.
Please let me know if there's a better way.
====
2. Altmode switching and orientation switching for USBDP PHY
For USB Type-C interfaces, an external Type-C controller chip assists
by detecting cable attachment, determining plug orientation, and
reporting USB PD message. The USB/DP combo PHY supports software
configurable pin mapping and DisplayPort lane assignment. Based on
these message, the combo PHY can perform both altmode switching and
orientation switching via software.
The RK3399 EVB IND board has a Type-C interface DisplayPort. It use
fusb302 chip as Type-C controller. The connection diagram is shown below:
fusb302 chip +---> USB2.0 PHY ----> DWC3 USB controller
|
+---> USB/DP PHY0 +--> CDN-DP controller
|
+--> DWC3 USB controller
====
3. Multiple bridge model for RK3399 CDN-DP
The RK3399 has two USB/DP combo PHY and one CDN-DP controller. And
the CDN-DP can be switched to output to one of the PHYs.
USB/DP PHY0 ---+
| <----> CDN-DP controller
USB/DP PHY1 ---+
In previous versions, if both PHY ports were connected to DP,
the CDN-DP driver would select the first PHY port for output.
On Dmitry's suggestion, we introduced a multi-bridge model to support
flexible selection of the output PHY port. For each PHY port, a
separate encoder and bridge are registered.
The change is based on the DRM AUX HPD bridge, rather than the
extcon approach. This requires the DT to correctly describe the
connections between the PHY, USB connector, and DP controller.
And cdn_dp_parse_hpd_bridge_dt() will parses it and determines
whether to register one or two bridges.
====
Patch1 add default HPD device when register Displayport altmode.
Patch2 add new Type-C mode switch for RK3399 USBDP phy binding.
Patch3 add typec_mux and typec_switch for RK3399 USBDP PHY.
Patch4 drops CDN-DP's extcon dependency when Type-C is present.
Patch5 add multiple bridges to support PHY port selection.
Patch6 add missing dp_out port for RK3399 CDN-DP.
Patch7 add Type-C DP support for RK3399 EVB IND board.
Changes in v4:
- Link to V3: https://lore.kernel.org/all/20250729090032.97-1-kernel@xxxxxxxxxx/
- Add default HPD device for DisplayPort altmode.
- Introduce multiple bridges for CDN-DP.
- ...
Changes in v3:
- Link to V2: https://lore.kernel.org/all/20250718062619.99-1-kernel@xxxxxxxxxx/
- Add more descriptions to clarify the role of the PHY in switching.
- Fix wrong vdo value.
- Fix port node in usb-c-connector.
Changes in v2:
- Link to V1: https://lore.kernel.org/all/20250715112456.101-1-kernel@xxxxxxxxxx/
- Reuse dp-port/usb3-port in rk3399-typec-phy binding.
- Fix compile error when CONFIG_TYPEC is not enabled.
- Notify DP HPD state by USB/DP PHY.
- Ignore duplicate HPD events.
- Add endpoint to link DP PHY and DP controller.
- Fix devicetree coding style.
Chaoyi Chen (7):
usb: typec: Add default HPD device when register DisplayPort altmode
dt-bindings: phy: rockchip: rk3399-typec-phy: Support mode-switch
phy: rockchip: phy-rockchip-typec: Add typec_mux/typec_switch support
drm/rockchip: cdn-dp: Support handle lane info without extcon
drm/rockchip: cdn-dp: Add multiple bridges to support PHY port
selection
arm64: dts: rockchip: Add missing dp_out port for RK3399 CDN-DP
arm64: dts: rockchip: rk3399-evb-ind: Add support for DisplayPort
.../phy/rockchip,rk3399-typec-phy.yaml | 6 +
arch/arm64/boot/dts/rockchip/rk3399-base.dtsi | 10 +-
.../boot/dts/rockchip/rk3399-evb-ind.dts | 146 ++++++
drivers/gpu/drm/rockchip/Kconfig | 1 +
drivers/gpu/drm/rockchip/cdn-dp-core.c | 423 +++++++++++++++---
drivers/gpu/drm/rockchip/cdn-dp-core.h | 23 +-
drivers/phy/rockchip/phy-rockchip-typec.c | 365 ++++++++++++++-
drivers/usb/typec/altmodes/displayport.c | 27 ++
drivers/usb/typec/altmodes/displayport.h | 2 +
drivers/usb/typec/class.c | 8 +
include/linux/usb/typec_altmode.h | 2 +
11 files changed, 932 insertions(+), 81 deletions(-)
--
2.49.0
