> Subject: Re: [PATCH v4 0/4] Add Aspeed AST2700 uhci support > > On Mon, Sep 22, 2025 at 01:20:41PM +0800, Ryan Chen wrote: > > This patch series adds support for the UHCI controller found on the > > Aspeed AST2700 SoC. > > > > Compared to earlier SoCs (AST2400/2500/2600), AST2700 UHCI: > > - requires a reset line to be deasserted before use > > - supports 64-bit DMA addressing > > > > This series updates the bindings and platform driver accordingly. > > For patches 2/4 and 4/4: > > Reviewed-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > > Alan Stern Thanks your review, I am wondering about the progress, should I submit a patch for patches 2/4, 4/4 with your reviewed-by? Or just leave it? Ryan > > > v4: > > - usb-uhci.yaml > > - fix errors 'make dt_binding_check' > > - uhci-platform.c > > - remove IS_ERR_OR_NULL(uhci->rsts) check, due to reset_control_assert > > will return 0, when uhci->rsts is null. > > - use dma_mask_32 as default, and just add aspeed,ast2700-uhci for > dma_64. > > > > v3: > > - uhci-platform.c > > - add reset_control_assert in uhci_hcd_platform_remove. > > > > v2: > > - usb-uhci.yaml > > - add required resets for aspeed,ast2700-uhci > > - uhci-platform.c > > - change the err_clk before err_reset. > > > > Ryan Chen (4): > > dt-bindings: usb: uhci: Add reset property > > usb: uhci: Add reset control support > > dt-bindings: usb: uhci: Add Aspeed AST2700 compatible > > usb: uhci: Add Aspeed AST2700 support > > > > .../devicetree/bindings/usb/usb-uhci.yaml | 13 ++++++++ > > drivers/usb/host/uhci-hcd.h | 1 + > > drivers/usb/host/uhci-platform.c | 31 > ++++++++++++++++--- > > 3 files changed, 41 insertions(+), 4 deletions(-) > > > > -- > > 2.34.1 > >
