This reverts commit 28a76fcc4c85dd39633fb96edb643c91820133e3. No actual HW bugs are known where Endpoint Context shows Running state but Stop Endpoint fails repeatedly with Context State Error and leaves the endpoint state unchanged. Stop Endpoint retries on Running EPs have been performed since early 2021 with no such issues reported so far. Trying to handle this hypothetical case brings a more realistic danger: if Stop Endpoint fails on an endpoint which hasn't yet started after a doorbell ring and enough latency occurs before this completion event is handled, the driver may time out and begin removing cancelled TDs from a running endpoint, even though one more retry would stop it reliably. Such high latency is rare but not impossible, and removing TDs from a running endpoint can cause more damage than not giving back a cancelled URB (which wasn't happening anyway). So err on the side of caution and revert to the old policy of always retrying if the EP appears running. Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Michal Pecio <michal.pecio@xxxxxxxxx> --- drivers/usb/host/xhci-ring.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 85b4791ccde5..3fef6454f3be 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1262,19 +1262,16 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, * Stopped state, but it will soon change to Running. * * Assume this bug on unexpected Stop Endpoint failures. - * Keep retrying until the EP starts and stops again. + * Keep retrying until the EP starts and stops again, on + * chips where this is known to help. Wait for 100ms. */ + if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100))) + break; fallthrough; case EP_STATE_RUNNING: /* Race, HW handled stop ep cmd before ep was running */ xhci_dbg(xhci, "Stop ep completion ctx error, ctx_state %d\n", GET_EP_CTX_STATE(ep_ctx)); - /* - * Don't retry forever if we guessed wrong or a defective HC never starts - * the EP or says 'Running' but fails the command. We must give back TDs. - */ - if (time_is_before_jiffies(ep->stop_time + msecs_to_jiffies(100))) - break; command = xhci_alloc_command(xhci, false, GFP_ATOMIC); if (!command) { -- 2.48.1