From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
Enable USB support on SM8750 MTP variants. The current definition will
start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
Signed-off-by: Melody Olvera <melody.olvera@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 72f081a890dfe49bfbee5e91b9e51da53b9d8baf..d28e45111b8d01c2753493a7a4ee248bbb334aa8 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -814,3 +814,27 @@ &tlmm {
&uart7 {
status = "okay";
};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l2d_0p88>;
+ vdda12-supply = <&vreg_l3g_1p2>;
+
+ phys = <&pmih0108_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3g_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p88>;
+
+ status = "okay";
+};
--
2.48.1
