Dependencies description:
The acpm-clk driver (#3) depends on the bindings (#1) and on the
ACPM DVFS ops (#2), thus I propose to have an immutable tag so that
the clock subsystem to merge first 3 patches if it really needs the
new clock driver. Patches #4 and #5 have no dependencies.
The Alive CLock and Power Manager (ACPM) firmware exposes clocks that
are variable and index based. These clocks don't provide an entire range
of values between the limits but only discrete points within the range.
The firmware also manages the voltage scaling appropriately with the
clock scaling. Make the ACPM node a clock provider.
Add support for the ACPM DVFS protocol. It translates clock frequency
requests to messages that can be interpreted by the ACPM firmware.
Add an ACPM clock driver to model the clocks exposed by the ACPM firmware.
Thanks,
ta
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
Changes in v3:
- dt-bindings:
- move clock bindings to a new bindings header
- update commit's subject, s/add #clock-cells/add ACPM clocks.
It also suggests that the bindings are added.
- prepend "GS101_" on clocks binding name. The bindings name are the
same for GS201 and the acpm-clk driver will likely include both.
- collect Rob's R-b
- clk-acpm:
- move clock definitions here instead of keeping them into the
ACPM protocol driver
- use platform_driver.id_table to differentiate device type
- fix Kconfig dependency, || (COMPILE_TEST && !EXYNOS_ACPM_PROTOCOL)
- update commit subject, s/dev/pdev
- exynos-acpm:
- move clock definitions to clk-acpm
- use devm-action to unregister clk-acpm platform device
- Link to v2: https://lore.kernel.org/r/20250827-acpm-clk-v2-0-de5c86b49b64@xxxxxxxxxx
Changes in v2:
- dt-bindings: clocks are not longer a child of ACPM protocol. Instead
make Alive Clock and Power Manager (ACPM) node a clock provider.
Update commit message.
- firmware: exynos-acpm: register by hand the ACPM clocks dev (new
patch)
- firmware: exynos-acpm: use defines intead of enum
- acpm-clk:
- switch to determine_rate
- drop __init, __refdata, __initconst, this is a module, we need those
methods and data, after boot as well.
- fix the assumption that the clocks are defined by ID in ascending order.
There's still an assumption that the clk_id < nr_clks, but this is
now covered by a sanity check in the clock driver.
- arm64: defconfig: enable Exynos ACPM clocks (add patch together with
this patch set)
- Link to v1: https://lore.kernel.org/r/20250819-acpm-clk-v1-0-6bbd97474671@xxxxxxxxxx
---
Tudor Ambarus (5):
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
firmware: exynos-acpm: add DVFS protocol
clk: samsung: add Exynos ACPM clock driver
firmware: exynos-acpm: register ACPM clocks pdev
arm64: defconfig: enable Exynos ACPM clocks
.../bindings/firmware/google,gs101-acpm-ipc.yaml | 11 ++
arch/arm64/configs/defconfig | 1 +
drivers/clk/samsung/Kconfig | 10 +
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-acpm.c | 203 +++++++++++++++++++++
drivers/firmware/samsung/Makefile | 4 +-
drivers/firmware/samsung/exynos-acpm-dvfs.c | 83 +++++++++
drivers/firmware/samsung/exynos-acpm-dvfs.h | 21 +++
drivers/firmware/samsung/exynos-acpm.c | 26 +++
include/dt-bindings/clock/google,gs101-acpm.h | 26 +++
.../linux/firmware/samsung/exynos-acpm-protocol.h | 10 +
11 files changed, 395 insertions(+), 1 deletion(-)
---
base-commit: c17b750b3ad9f45f2b6f7e6f7f4679844244f0b9
change-id: 20250819-acpm-clk-28d2a78e0307
Best regards,
--
Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
