The smdk5250 board has an ethernet port which is connected to bank 1
of the SROM controller. Describe it.
Signed-off-by: Henrik Grimler <henrik@xxxxxxxxxx>
---
arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts | 37 +++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index bb623726ef1e614c50074ec2890072b2b37d212e..6af1f64c984ba6e8344d759d2feb7fbfa320d81f 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -422,6 +422,43 @@ max77686_irq: max77686-irq-pins {
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+
+ srom_ctl: srom-ctl-pins {
+ samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+ "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ srom_ebi: srom-ebi-pins {
+ samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+ "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+ "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+ "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+ "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+ "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&sromc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+ ethernet@1,0 {
+ compatible = "smsc,lan9115";
+ reg = <1 0 0x100>;
+ phy-mode = "mii";
+ smsc,irq-push-pull;
+ interrupt-parent = <&gpx0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ reg-io-width = <2>;
+
+ samsung,srom-page-mode;
+ samsung,srom-timing = <9 12 1 6 1 1>;
+ };
};
&usbdrd {
--
2.51.0
