Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Sent: 06 July 2025 03:11 PM
> To: Pritam Manohar Sutar <pritam.sutar@xxxxxxxxxxx>
> Cc: vkoul@xxxxxxxxxx; kishon@xxxxxxxxxx; robh@xxxxxxxxxx;
> krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; alim.akhtar@xxxxxxxxxxx;
> andre.draszik@xxxxxxxxxx; peter.griffin@xxxxxxxxxx; neil.armstrong@xxxxxxxxxx;
> kauschluss@xxxxxxxxxxx; ivo.ivanov.ivanov1@xxxxxxxxx;
> m.szyprowski@xxxxxxxxxxx; s.nawrocki@xxxxxxxxxxx; linux-
> phy@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-samsung-
> soc@xxxxxxxxxxxxxxx; rosa.pila@xxxxxxxxxxx; dev.tailor@xxxxxxxxxxx;
> faraz.ata@xxxxxxxxxxx; muhammed.ali@xxxxxxxxxxx;
> selvarasu.g@xxxxxxxxxxx
> Subject: Re: [PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add
> ExynosAutov920 HS phy compatible
>
> On Tue, Jul 01, 2025 at 05:37:01PM +0530, Pritam Manohar Sutar wrote:
> > Add a dedicated compatible string for USB HS phy found in this SoC.
> > The SoC requires two clocks, named "phy" and "ref" (same as clocks
> > required by Exynos850).
> >
> > It also requires various power supplies (regulators) for the internal
> > circuitry to work. The required voltages are:
> > * avdd075_usb - 0.75v
> > * avdd18_usb20 - 1.8v
> > * avdd33_usb20 - 3.3v
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> No, really. Look:
>
> > Signed-off-by: Pritam Manohar Sutar <pritam.sutar@xxxxxxxxxxx>
> > ---
> > .../bindings/phy/samsung,usb3-drd-phy.yaml | 37 +++++++++++++++++++
> > 1 file changed, 37 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > index e906403208c0..2e29ff749bba 100644
> > --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
> > @@ -34,6 +34,7 @@ properties:
> > - samsung,exynos7870-usbdrd-phy
> > - samsung,exynos850-usbdrd-phy
> > - samsung,exynos990-usbdrd-phy
> > + - samsung,exynosautov920-usbdrd-phy
> >
> > clocks:
> > minItems: 1
> > @@ -110,6 +111,15 @@ properties:
> > vddh-usbdp-supply:
> > description: VDDh power supply for the USB DP phy.
> >
> > + avdd075_usb-supply:
> > + description: 0.75V power supply for USB phy
> > +
> > + avdd18_usb20-supply:
> > + description: 1.8V power supply for USB phy
> > +
> > + avdd33_usb20-supply:
> > + description: 3.3V power supply for USB phy
> > +
>
> None of these were here. Follow DTS coding style... but why are you adding
> completely new supplies?
Digital supplies were here. Need Analog supplies for exynosautov920, hence added new Analog supplies; 'a'vdd075_usb, 'a'vdd18_usb20, 'a'vdd33_usb20
Will add "full stops" for DTS coding style in description.
>
>
> > required:
> > - compatible
> > - clocks
> > @@ -235,6 +245,33 @@ allOf:
> >
> > reg-names:
> > maxItems: 1
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - samsung,exynosautov920-usbdrd-phy
> > + then:
> > + properties:
> > + clocks:
> > + minItems: 2
> > + maxItems: 2
> > +
> > + clock-names:
> > + items:
> > + - const: phy
> > + - const: ref
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + reg-names:
> > + maxItems: 1
> > +
> > + required:
> > + - avdd075_usb-supply
> > + - avdd18_usb20-supply
> > + - avdd33_usb20-supply
>
> Neither was this entire diff hunk here.
>
> This was part of other block for a reason.
Added regulators in driver. This block is added for regulators (other block does not have "required" field for power supplies)
if excluded this block,
"make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml" will fail as mentioned below
/home/pritam.sutar/workspace/auto/kitt2/projects/upstream/src/kernel/github/linux-next/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: phy@16480000: Unevaluated properties are not allowed ('avdd075_usb-supply', 'avdd18_usb20-supply', 'avdd33_usb20-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
/home/pritam.sutar/workspace/auto/kitt2/projects/upstream/src/kernel/github/linux-next/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: phy@16490000: Unevaluated properties are not allowed ('avdd075_usb-supply', 'avdd18_usb20-supply', 'avdd33_usb20-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
/home/pritam.sutar/workspace/auto/kitt2/projects/upstream/src/kernel/github/linux-next/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: phy@16500000: Unevaluated properties are not allowed ('avdd075_usb-supply', 'avdd18_usb20-supply', 'avdd33_usb20-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
/home/pritam.sutar/workspace/auto/kitt2/projects/upstream/src/kernel/github/linux-next/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: phy@16510000: Unevaluated properties are not allowed ('avdd075_usb-supply', 'avdd18_usb20-supply', 'avdd33_usb20-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
/home/pritam.sutar/workspace/auto/kitt2/projects/upstream/src/kernel/github/linux-next/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: phy@16520000: Unevaluated properties are not allowed ('avdd075_usb-supply', 'avdd18_usb20-supply', 'avdd33_usb20-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
Note: These patches are being validated by enabling DTS (However, DTS patches are planned in next phase).
If you have any idea to re-use existing block by differentiating required power supplies, please suggest.
>
> NAK
>
> Best regards,
> Krzysztof
