On 13/06/2025 07:56, Pritam Manohar Sutar wrote:
Update the USB 3.1 DRD controller and USB31DRD phy nodes to support SS combo phy for this soc. The USB 3.1 DRD controller has the following features: * DWC3 compatible * compliant with both USB device 3.1 and USB device 2.0 standards * compliant with USB host 3.1 and USB host 2.0 standards * supports USB device 3.1 and USB device 2.0 interfaces * supports USB host 3.1 and USB host 2.0 interfaces * full-speed (12 Mbps) and high-speed (480 Mbps) modes with USB device 2.0 interface * super-speed (5 Gbps) mode with USB device 3.1 Gen1 interface * super-speed plus (10 Gbps) mode with USB device 3.1 Gen2 interface * single USB port which can be used for USB 3.1 or USB 2.0 * on-chip USB PHY transceiver * supports up to 16 bi-directional endpoints * compliant with xHCI 1.1 specification USB3.1 SSP+(10Gbps) is supported in this commit and SS phy in combo phy only supports PIPE3 interface and it is added in index 0 of SS phy. UTMI+ and PIPE3 PHY interfaces are specified in "phys" property, UTMI+ (index 0 HS phy) and PIPE3 (index 0 SS phy). Signed-off-by: Pritam Manohar Sutar <pritam.sutar@xxxxxxxxxxx> --- .../arm64/boot/dts/exynos/exynosautov920-sadk.dts | 4 ++++ arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 15 +++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts index a21386bd9af3..40588f7c9998 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts @@ -88,6 +88,10 @@ &xtcxo { };/* usb */+&usbdrd31_ssphy { + status = "okay"; +}; + &usbdrd31_hsphy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 4efc005cae80..5ee7fad346b9 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -1048,6 +1048,17 @@ pinctrl_hsi1: pinctrl@16450000 { interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; };+ usbdrd31_ssphy: phy@16480000 {+ compatible = "samsung,exynosautov920-usb31drd-ssphy"; + reg = <0x16480000 0x0200>; + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>, + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + usbdrd31_hsphy: phy@16490000 { compatible = "samsung,exynosautov920-usbdrd-hsphy"; reg = <0x16490000 0x0200>; @@ -1109,8 +1120,8 @@ usbdrd31_dwc3: usb@0 { <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>; clock-names = "ref", "susp_clk"; interrupts = <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usbdrd31_hsphy 0>; - phy-names = "usb2-phy"; + phys = <&usbdrd31_hsphy 0>, <&usbdrd31_ssphy 0>; + phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk;
I think at least patch 6 & 9 should be squashed. Neil
