[PATCH v2 10/17] regulator: s2mps11: use dev_err_probe() where appropriate

[André Draszik <andre.draszik@xxxxxxxxxx>]

dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.

While at it, harmonise some error messages to add regulator name and ID
like in other messages in this driver, and update messages to be more
similar to other child-drivers of this PMIC (e.g. RTC).

Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
---
 drivers/regulator/s2mps11.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 1f51fbc6c7b6e158f9707c04d9f030b9eee5e842..30586e9884bfb998ff07e3148813344b307506c0 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1249,9 +1249,9 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		BUILD_BUG_ON(S2MPS_REGULATOR_MAX < ARRAY_SIZE(s2mpu05_regulators));
 		break;
 	default:
-		dev_err(&pdev->dev, "Invalid device type: %u\n",
-				    s2mps11->dev_type);
-		return -EINVAL;
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Unsupported device type %d\n",
+				     s2mps11->dev_type);
 	}
 
 	s2mps11->ext_control_gpiod = devm_kcalloc(&pdev->dev, rdev_num,
@@ -1290,21 +1290,20 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 			devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
 		regulator = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
-		if (IS_ERR(regulator)) {
-			dev_err(&pdev->dev, "regulator init failed for %d\n",
-				i);
-			return PTR_ERR(regulator);
-		}
+		if (IS_ERR(regulator))
+			return dev_err_probe(&pdev->dev, PTR_ERR(regulator),
+					     "regulator init failed for %d/%s\n",
+					     regulators[i].id,
+					     regulators[i].name);
 
 		if (config.ena_gpiod) {
 			ret = s2mps14_pmic_enable_ext_control(s2mps11,
-					regulator);
-			if (ret < 0) {
-				dev_err(&pdev->dev,
-						"failed to enable GPIO control over %s: %d\n",
-						regulator->desc->name, ret);
-				return ret;
-			}
+							      regulator);
+			if (ret < 0)
+				return dev_err_probe(&pdev->dev, ret,
+						     "failed to enable GPIO control over %d/%s\n",
+						     regulator->desc->id,
+						     regulator->desc->name);
 		}
 	}
 

-- 
2.50.0.rc0.604.gd4ff7b7c86-goog