As described in the device tree bindings, it's not necessary for the SNPS eUSB2 phy to be connected to a repeater. In configurations where there are such instances, the driver probing fails and the usb controller does not work. Make the repeater optional to avoid that, which also lets us use the eUSB2 phy when it's connected to a repeater that is not configurable by the kernel (for example it's missing a driver), as long as it has been configured beforehand (usually by the bootloader). Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx> Acked-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx> --- drivers/phy/phy-snps-eusb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c index 1933e8440..4094786d2 100644 --- a/drivers/phy/phy-snps-eusb2.c +++ b/drivers/phy/phy-snps-eusb2.c @@ -426,7 +426,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev) return dev_err_probe(dev, ret, "failed to get regulator supplies\n"); - phy->repeater = devm_of_phy_get_by_index(dev, np, 0); + phy->repeater = devm_of_phy_optional_get(dev, np, 0); if (IS_ERR(phy->repeater)) return dev_err_probe(dev, PTR_ERR(phy->repeater), "failed to get repeater\n"); -- 2.43.0
