The DMA map functions can fail and should be tested for errors.
Fixes: d8701fe890ec ("mtd: rawnand: renesas: Add new NAND controller driver")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Thomas Fourier <fourier.thomas@xxxxxxxxx>
---
drivers/mtd/nand/raw/renesas-nand-controller.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/raw/renesas-nand-controller.c b/drivers/mtd/nand/raw/renesas-nand-controller.c
index 44f6603736d1..f4a775571733 100644
--- a/drivers/mtd/nand/raw/renesas-nand-controller.c
+++ b/drivers/mtd/nand/raw/renesas-nand-controller.c
@@ -426,6 +426,10 @@ static int rnandc_read_page_hw_ecc(struct nand_chip *chip, u8 *buf,
/* Configure DMA */
dma_addr = dma_map_single(rnandc->dev, rnandc->buf, mtd->writesize,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(rnandc->dev, dma_addr)) {
+ dev_err(rnandc->dev, "DMA mapping failed.\n");
+ return -ENOMEM;
+ }
writel(dma_addr, rnandc->regs + DMA_ADDR_LOW_REG);
writel(mtd->writesize, rnandc->regs + DMA_CNT_REG);
writel(DMA_TLVL_MAX, rnandc->regs + DMA_TLVL_REG);
@@ -606,6 +610,10 @@ static int rnandc_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf,
/* Configure DMA */
dma_addr = dma_map_single(rnandc->dev, (void *)rnandc->buf, mtd->writesize,
DMA_TO_DEVICE);
+ if (dma_mapping_error(rnandc->dev, dma_addr)) {
+ dev_err(rnandc->dev, "DMA mapping failed.\n");
+ return -ENOMEM;
+ }
writel(dma_addr, rnandc->regs + DMA_ADDR_LOW_REG);
writel(mtd->writesize, rnandc->regs + DMA_CNT_REG);
writel(DMA_TLVL_MAX, rnandc->regs + DMA_TLVL_REG);
--
2.43.0
