On Tue, Sep 23, 2025 at 08:12:27PM +0800, zhangsenchuan@xxxxxxxxxxxxxxxxxx wrote:
> From: Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
>
> Add driver for the Eswin EIC7700 PCIe host controller,the controller is
> based on the DesignWare PCIe core, IP revision 6.00a The PCIe Gen.3
> controller supports a data rate of 8 GT/s and 4 channels, support INTX
> and MSI interrupts.
>
> Signed-off-by: Yu Ning <ningyu@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Yanghui Ou <ouyanghui@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/pci/controller/dwc/Kconfig | 11 +
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-eic7700.c | 446 ++++++++++++++++++++++
> 3 files changed, 458 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-eic7700.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index ff6b6d9e18ec..8474bc6356f7 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -375,6 +375,17 @@ config PCI_EXYNOS
> hardware and therefore the driver re-uses the DesignWare core
> functions to implement the driver.
>
...
> +
> +static void eswin_pcie_hide_broken_msix_cap(struct dw_pcie *pci)
> +{
> + u16 offset, val;
> +
> + /*
> + * Hardware doesn't support MSI-X but it advertises MSI-X capability,
> + * to avoid this problem, the MSI-X capability in the PCIe capabilities
> + * linked-list needs to be disabled. Since the PCI Express capability
> + * structure's next pointer points to the MSI-X capability, and the
> + * MSI-X capability's next pointer is null (00H), so only the PCI
> + * Express capability structure's next pointer needs to be set 00H.
> + */
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + val = dw_pcie_readl_dbi(pci, offset);
> + val &= ~PCIE_MSIX_DISABLE_MASK;
supposed PCIE_MSIX_DISABLE_MASK is standard defination for PCI_CAP_ID_EXP
register, it should be in pci.h
> + dw_pcie_writel_dbi(pci, offset, val);
> +}
> +
> +static int eswin_pcie_host_init(struct dw_pcie_rp *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct eswin_pcie *pcie = to_eswin_pcie(pci);
> + struct eswin_pcie_port *port;
> + u32 retries;
> + u8 msi_cap;
> + u32 val;
> + int ret;
> +
> + pcie->num_clks = devm_clk_bulk_get_all_enabled(pci->dev, &pcie->clks);
> + if (pcie->num_clks < 0)
> + return dev_err_probe(pci->dev, pcie->num_clks,
> + "Failed to get pcie clocks\n");
> +
> + ret = eswin_pcie_deassert(pcie);
> + if (ret)
> + return ret;
> +
> + /* Configure root port type */
> + val = readl_relaxed(pcie->mgmt_base + PCIEMGMT_CTRL0_OFFSET);
> + val &= ~PCIEMGMT_CTRL0_ROOT_PORT_MASK;
> + writel_relaxed(val | PCI_EXP_TYPE_ROOT_PORT,
> + pcie->mgmt_base + PCIEMGMT_CTRL0_OFFSET);
> +
> + list_for_each_entry(port, &pcie->ports, list) {
> + ret = eswin_pcie_perst_deassert(port, pcie);
> + if (ret)
> + goto err_perst;
> + }
> +
> + /* Configure app_hold_phy_rst */
> + val = readl_relaxed(pcie->mgmt_base + PCIEMGMT_CTRL0_OFFSET);
> + val &= ~PCIEMGMT_APP_HOLD_PHY_RST;
> + writel_relaxed(val, pcie->mgmt_base + PCIEMGMT_CTRL0_OFFSET);
> +
> + /* The maximum waiting time for the clock switch lock is 20ms */
> + retries = 20;
> + do {
> + val = readl_relaxed(pcie->mgmt_base + PCIEMGMT_STATUS0_OFFSET);
> + if (!(val & PCIEMGMT_PM_SEL_AUX_CLK))
> + break;
> + fsleep(1000);
> + retries--;
> + } while (retries);
use readl_poll_timeout()
> +
> + if (!retries) {
> + dev_err(pci->dev, "Timeout waiting for PM_SEL_AUX_CLK ready\n");
> + ret = -ETIMEDOUT;
> + goto err_phy_init;
> + }
> +
> + /*
> + * Configure ESWIN VID:DID for Root Port as the default values are
> + * invalid.
> + */
> + dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, VENDOR_ID_VALUE);
> + dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, DEVICE_ID_VALUE);
> +
> + /* Configure support 32 MSI vectors */
> + msi_cap = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
> + val = dw_pcie_readw_dbi(pci, msi_cap + PCI_MSI_FLAGS);
> + val &= ~PCI_MSI_FLAGS_QMASK;
> + val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, 5);
> + dw_pcie_writew_dbi(pci, msi_cap + PCI_MSI_FLAGS, val);
> +
> + /* Configure disable MSI-X cap */
> + if (!pcie->msix_cap)
> + eswin_pcie_hide_broken_msix_cap(pci);
> +
> + return 0;
> +
> +err_phy_init:
> + list_for_each_entry(port, &pcie->ports, list)
> + reset_control_assert(port->perst);
> +err_perst:
> + eswin_pcie_assert(pcie);
> +
> + return ret;
> +}
> +
...
> +
> +static int eswin_pcie_suspend(struct device *dev)
> +{
> + struct eswin_pcie *pcie = dev_get_drvdata(dev);
> + struct eswin_pcie_port *port;
> +
> + /*
> + * For controllers with active devices, resources are retained and
> + * cannot be turned off.
> + */
> + if (!dw_pcie_link_up(&pcie->pci)) {
> + list_for_each_entry(port, &pcie->ports, list)
> + reset_control_assert(port->perst);
> + eswin_pcie_assert(pcie);
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> + pcie->suspended = true;
> + }
> +
> + return 0;
> +}
does dw_pcie_resume_noirq() work for you? If not, please update common
one.
> +
> +static int eswin_pcie_resume(struct device *dev)
> +{
> + struct eswin_pcie *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!pcie->suspended)
> + return 0;
> +
> + ret = eswin_pcie_host_init(&pcie->pci.pp);
> + if (ret) {
> + dev_err(dev, "Failed to init host: %d\n", ret);
> + return ret;
> + }
> +
> + dw_pcie_setup_rc(&pcie->pci.pp);
> + eswin_pcie_start_link(&pcie->pci);
> + dw_pcie_wait_for_link(&pcie->pci);
> +
> + pcie->suspended = false;
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops eswin_pcie_pm_ops = {
> + NOIRQ_SYSTEM_SLEEP_PM_OPS(eswin_pcie_suspend, eswin_pcie_resume)
> +};
> +
> +static const struct eswin_pcie_data eswin_7700_data = {
> + .msix_cap = false,
> +};
> +
> +static const struct of_device_id eswin_pcie_of_match[] = {
> + { .compatible = "eswin,eic7700-pcie", .data = &eswin_7700_data },
> + {},
> +};
> +
> +static struct platform_driver eswin_pcie_driver = {
> + .probe = eswin_pcie_probe,
> + .driver = {
> + .name = "eic7700-pcie",
> + .of_match_table = eswin_pcie_of_match,
> + .suppress_bind_attrs = true,
> + .pm = &eswin_pcie_pm_ops,
> + },
> +};
> +builtin_platform_driver(eswin_pcie_driver);
> +
> +MODULE_DESCRIPTION("PCIe host controller driver for EIC7700 SoCs");
> +MODULE_AUTHOR("Yu Ning <ningyu@xxxxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Yanghui Ou <ouyanghui@xxxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
