Refer to PCIe r6.0, sec 5.2, fig 5-1 Link Power Management State Flow
Diagram. Both L0 and L2/L3 Ready can be transferred to LDn directly.
It's harmless to let dw_pcie_suspend_noirq() proceed suspend after the
PME_Turn_Off is sent out, whatever the LTSSM state is in L2 or L3 after
a recommended 10ms max wait refer to PCIe r6.0, sec 5.3.3.2.1 PME
Synchronization.
The LTSSM states are inaccessible on i.MX6QP and i.MX7D after the
PME_Turn_Off is sent out.
To support this case, don't poll L2 state and apply a simple delay of
PCIE_PME_TO_L2_TIMEOUT_US(10ms) if the QUIRK_NOL2POLL_IN_PM flag is set
in suspend.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
---
.../pci/controller/dwc/pcie-designware-host.c | 31 +++++++++++++------
drivers/pci/controller/dwc/pcie-designware.h | 4 +++
2 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 952f8594b5012..20a7f827babbf 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -1007,7 +1007,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
{
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 val;
- int ret;
+ int ret = 0;
/*
* If L1SS is supported, then do not put the link into L2 as some
@@ -1024,15 +1024,26 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
return ret;
}
- ret = read_poll_timeout(dw_pcie_get_ltssm, val,
- val == DW_PCIE_LTSSM_L2_IDLE ||
- val <= DW_PCIE_LTSSM_DETECT_WAIT,
- PCIE_PME_TO_L2_TIMEOUT_US/10,
- PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
- if (ret) {
- /* Only log message when LTSSM isn't in DETECT or POLL */
- dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
- return ret;
+ if (dwc_quirk(pci, QUIRK_NOL2POLL_IN_PM)) {
+ /*
+ * Refer to PCIe r6.0, sec 5.2, fig 5-1 Link Power Management
+ * State Flow Diagram. Both L0 and L2/L3 Ready can be
+ * transferred to LDn directly. On the LTSSM states poll broken
+ * platforms, add a max 10ms delay refer to PCIe r6.0,
+ * sec 5.3.3.2.1 PME Synchronization.
+ */
+ mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
+ } else {
+ ret = read_poll_timeout(dw_pcie_get_ltssm, val,
+ val == DW_PCIE_LTSSM_L2_IDLE ||
+ val <= DW_PCIE_LTSSM_DETECT_WAIT,
+ PCIE_PME_TO_L2_TIMEOUT_US/10,
+ PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
+ if (ret) {
+ /* Only log message when LTSSM isn't in DETECT or POLL */
+ dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
+ return ret;
+ }
}
/*
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 00f52d472dcdd..4e5bf6cb6ce80 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -295,6 +295,9 @@
/* Default eDMA LLP memory size */
#define DMA_LLP_MEM_SIZE PAGE_SIZE
+#define QUIRK_NOL2POLL_IN_PM BIT(0)
+#define dwc_quirk(pci, val) (pci->quirk_flag & val)
+
struct dw_pcie;
struct dw_pcie_rp;
struct dw_pcie_ep;
@@ -504,6 +507,7 @@ struct dw_pcie {
const struct dw_pcie_ops *ops;
u32 version;
u32 type;
+ u32 quirk_flag;
unsigned long caps;
int num_lanes;
int max_link_speed;
--
2.37.1
