When waiting for the PCIe link to come up, both link up and link down are valid results depending on the device state. Since the link may come up later and to get rid of the following mis-reported PM errors. Do not return an -ETIMEDOUT error, as the outcome has already been reported in dw_pcie_wait_for_link(). PM error logs introduced by the -ETIMEDOUT error return. imx6q-pcie 33800000.pcie: Phy link never came up imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110 imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110 Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> Reviewed-by: Frank Li <Frank.Li@xxxxxxx> --- drivers/pci/controller/dwc/pcie-designware-host.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index fb5639c73e29f..5cb9aa221b050 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -1085,10 +1085,9 @@ int dw_pcie_resume_noirq(struct dw_pcie *pci) if (ret) return ret; - ret = dw_pcie_wait_for_link(pci); - if (ret) - return ret; + /* Ignore errors, the link may come up later */ + dw_pcie_wait_for_link(pci); - return ret; + return 0; } EXPORT_SYMBOL_GPL(dw_pcie_resume_noirq); -- 2.37.1
