Add opp-level to indicate PCIe data rates and also define OPP enteries
for each link width and data rate. Append the opp level to name of the
opp node to indicate both frequency and level.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 41 +++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 33574ad706b915136546c7f92c7cd0b8a0d62b7e..d7f8706ca4949e253a4102474c92b393a345262f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2052,6 +2052,7 @@ opp-2500000 {
opp-hz = /bits/ 64 <2500000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <250000 1>;
+ opp-level = <1>;
};
/* GEN 2 x1 */
@@ -2059,6 +2060,7 @@ opp-5000000 {
opp-hz = /bits/ 64 <5000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <500000 1>;
+ opp-level = <2>;
};
/* GEN 3 x1 */
@@ -2066,6 +2068,7 @@ opp-8000000 {
opp-hz = /bits/ 64 <8000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <984500 1>;
+ opp-level = <3>;
};
};
@@ -2210,45 +2213,67 @@ pcie1_opp_table: opp-table {
compatible = "operating-points-v2";
/* GEN 1 x1 */
- opp-2500000 {
+ opp-2500000-1 {
opp-hz = /bits/ 64 <2500000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <250000 1>;
+ opp-level = <1>;
};
- /* GEN 1 x2 and GEN 2 x1 */
- opp-5000000 {
+ /* GEN 1 x2 */
+ opp-5000000-1 {
+ opp-hz = /bits/ 64 <5000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <500000 1>;
+ opp-level = <1>;
+ };
+
+ /* GEN 2 x1 */
+ opp-5000000-2 {
opp-hz = /bits/ 64 <5000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <500000 1>;
+ opp-level = <2>;
};
/* GEN 2 x2 */
- opp-10000000 {
+ opp-10000000-2 {
opp-hz = /bits/ 64 <10000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <1000000 1>;
+ opp-level = <2>;
};
/* GEN 3 x1 */
- opp-8000000 {
+ opp-8000000-3 {
opp-hz = /bits/ 64 <8000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <984500 1>;
+ opp-level = <3>;
+ };
+
+ /* GEN 3 x2 */
+ opp-16000000-3 {
+ opp-hz = /bits/ 64 <16000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <1969000 1>;
+ opp-level = <3>;
};
- /* GEN 3 x2 and GEN 4 x1 */
- opp-16000000 {
+ /* GEN 4 x1 */
+ opp-16000000-4 {
opp-hz = /bits/ 64 <16000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <1969000 1>;
+ opp-level = <4>;
};
/* GEN 4 x2 */
- opp-32000000 {
+ opp-32000000-4 {
opp-hz = /bits/ 64 <32000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <3938000 1>;
+ opp-level = <4>;
};
};
--
2.34.1
