PCIe ECAM(Enhanced Configuration Access Mechanism) feature requires
maximum of 256MB configuration space.
To enable this feature increase configuration space size to 256MB. If
the config space is increased, the BAR space needs to be truncated as
it resides in the same location. To avoid the bar space truncation move
config space, DBI, ELBI, iATU to upper PCIe region and use lower PCIe
iregion entirely for BAR region.
This depends on the commit: '10ba0854c5e6 ("PCI: qcom: Disable mirroring
of DBI and iATU register space in BAR region")'
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 64a2abd3010018e94eb50c534a509d6b4cf2473b..36afeb2e45937f8ad301c55caf296babdb499820 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2202,11 +2202,11 @@ wifi: wifi@17a10040 {
pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sc7280";
- reg = <0 0x01c08000 0 0x3000>,
- <0 0x40000000 0 0xf1d>,
- <0 0x40000f20 0 0xa8>,
- <0 0x40001000 0 0x1000>,
- <0 0x40100000 0 0x100000>;
+ reg = <0x0 0x01c08000 0 0x3000>,
+ <0x4 0x10001000 0 0xf1d>,
+ <0x4 0x10001f20 0 0xa8>,
+ <0x4 0x10000000 0 0x1000>,
+ <0x4 0x00000000 0 0x10000000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
device_type = "pci";
@@ -2217,8 +2217,8 @@ pcie1: pcie@1c08000 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
- <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40000000 0x0 0x100000>,
+ <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
--
2.34.1
