PCIe supports multiple data rates that may operate at the same clock
frequency by varying the link width. In such cases, frequency alone
is insufficient to identify the correct OPP. Use the newly introduced
dev_pm_opp_find_key_exact() API to match both frequency and
level when selecting an OPP, here level indicates PCIe data rate.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 294babe1816e4d0c2b2343fe22d89af72afcd6cd..4f40fc7b828483419b87057c53e2f754811bdda0 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1555,6 +1555,7 @@ static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
{
u32 offset, status, width, speed;
struct dw_pcie *pci = pcie->pci;
+ struct dev_pm_opp_key key;
unsigned long freq_kbps;
struct dev_pm_opp *opp;
int ret, freq_mbps;
@@ -1582,8 +1583,10 @@ static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
return;
freq_kbps = freq_mbps * KILO;
- opp = dev_pm_opp_find_freq_exact(pci->dev, freq_kbps * width,
- true);
+ key.freq = freq_kbps * width;
+ key.level = speed;
+ key.bw = 0;
+ opp = dev_pm_opp_find_key_exact(pci->dev, key, true);
if (!IS_ERR(opp)) {
ret = dev_pm_opp_set_opp(pci->dev, opp);
if (ret)
--
2.34.1
